Teichfuss Grifo

Grifo
Role Training glider
National origin Italy
Manufacturer F.A.L. Teichfuss (Fabrica Alianti Teichfuss), la Aie, Pavulla
Designer Luigi Teichfluss
First flight 1934
Number built 3
Developed from Teichfuss Nibio I

The Teichfuss Grifo was an Italian training glider designed by Luigi Teichfuss and flown in 1934. It was built in small numbers.

Design and development

The Grifo single-seat trainer was intended as an improved version of the Teichfuss Nibio I. It was a braced high-wing monoplane, with a single spar wing. Apart from full rounded wing tips the wing was rectangular in plan, with plywood covering from the spar forward around the leading edge forming a torsion resisting D-box. Aft of the spar the wing was fabric-covered. Ailerons occupied more than half the span. The wing was held over the fuselage on a pedestal and braced on each side by a pair of parallel faired struts to the lower fuselage.[1]

The Grifo's fuselage was a ply covered wooden hexagonal structure with deep sides. The open cockpit, fitted with a small windscreen, was immediately ahead of the pedestal which dropped rapidly away to the upper fuselage behind the trailing edge. All the tail surfaces were straight-tapered and straight-tipped, with the tailplane mounted on top of the fuselage and carrying unbalanced elevators. The fin was small but mounted a large, balanced rudder which extended down to the keel, working in an elevator cut-out and provided with a protecting tail bumper. The Grifo's landing skid, equipped with rubber shock absorbers, was short, only reaching as far aft as the forward wing strut.[1]

The Grifo first flew in 1934.[1] Three were built[2] and used by flying clubs.[1]

Specifications

Data from Pedrielli (2011) pp.42-3[1]

General characteristics

  • Crew: One
  • Length: 6.53 m (21 ft 5 in)
  • Wingspan: 14.20 m (46 ft 7 in)
  • Wing area: 16 m2 (170 sq ft)
  • Aspect ratio: 12.60
  • Empty weight: 135 kg (298 lb)
  • Gross weight: 220 kg (485 lb)

Performance

  • Maximum glide ratio: estimated 17:1
  • Rate of sink: 0.9 m/s (180 ft/min) minimum[2]
  • Wing loading: 12.9 kg/m2 (2.6 lb/sq ft)

References

  1. 1 2 3 4 5 Pedrielli, Vincenzo; Camastra, Francesco (2011). Italian Vintage Sailplanes. Königswinter: EQIP Werbung & Verlag GmbH. pp. 42–3. ISBN 9783980883894.
  2. 1 2 "Teichfuss Grifo". Retrieved 23 November 2013.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.