Space sunshade

A space sunshade or sunshield is a parasol that diverts or otherwise reduces some of a star's radiation, preventing them from hitting a spacecraft or planet and thereby reducing its insolation, which results in reduced heating. Light can be diverted by different methods. First proposed in 1989, the original space sunshade concept involves putting a large occulting disc, or technology of equivalent purpose at the L1 gravitation point (Lagrangian point) between the Earth and Sun.

A sunshade is of particular interest as a climate engineering method for mitigating global warming through solar radiation management. Heightened interest in such projects reflects the concern that internationally negotiated reductions in carbon emissions may be insufficient to stem climate change.[1] Sunshades could also be used to produce space solar power, acting as solar power satellites. Proposed shade designs include a single-piece shade and a shade made by a great number of small objects. Most such proposals contemplate a blocking element at the Sun-Earth L1 Lagrangian point.

In 1989 James Early proposed a space-based sun-shade to divert sunlight at the planetary level. His design involved making a large glass (2000 km) occulter from lunar material and placing at the L1 point. Issues included the large amount of material needed to make the disc and also the energy to launch it to its orbit.[2]

Designs for planetary sunshade

Cloud of small spacecraft

One proposed sunshade would be composed of 16 trillion small disks at the Sun-Earth L1 Lagrangian point, 1.5 million kilometers above Earth. Each disk is proposed to have a 0.6-meter diameter and a thickness of about 5 micrometers. The mass of each disk would be about a gram, adding up to a total of almost 20 million tonnes.[3] Such a group of small sunshades that blocks 2% of the sunlight, deflecting it off into space, would be enough to halt global warming, giving us ample time to cut our emissions back on earth.[4]

The individual autonomous flyers building up the cloud of sunshades are proposed not to reflect the sunlight but rather to be transparent lenses, deflecting the light slightly so it does not hit Earth. This minimizes the effect of solar radiation pressure on the units, requiring less effort to hold them in place at the L1 point. An optical prototype has been constructed by Roger Angel with funding from NIAC.[5]

The remaining solar pressure and the fact that the L1 point is one of unstable equilibrium, easily disturbed by the wobble of the earth due to gravitational effects from the moon, requires the small autonomous flyers to be capable of maneuvering themselves to hold position. A suggested solution is to place mirrors capable of rotation on the surface of the flyers. By using the solar radiation pressure on the mirrors as solar sails and tilting them in the right direction, the flyer will be capable of altering its speed and direction to keep in position.[6]

Such a group of sunshades would need to occupy an area of about 3.8 million square kilometers if placed at the L1 point.[6] The deployment of the flyers is an issue that requires new technology. Large railguns or coilguns are proposed to fire a capsule containing a million shades into space every 5 minutes for 10 years using 20 separate launch sites.

Even so, it would still take years to launch enough of the disks into orbit to have any effect. This means a long lead time. Roger Angel of the University of Arizona[7] presented the idea for a sunshade at the U.S. National Academy of Sciences in April 2006 and won a NASA Institute for Advanced Concepts grant for further research in July 2006.

Creating this sunshade in space was estimated to cost in excess of US$5 trillion with an estimated lifetime of 50 years.[8] Thus leading Professor Angel to conclude that "[t]he sunshade is no substitute for developing renewable energy, the only permanent solution. A similar massive level of technological innovation and financial investment could ensure that. But if the planet gets into an abrupt climate crisis that can only be fixed by cooling, it would be good to be ready with some shading solutions that have been worked out."[6][9]

One Fresnel lens

The basic function of a space lens to mitigate global warming. A 1,000-kilometre diameter lens is sufficient, and much smaller than what is shown in this simplified image. As a Fresnel lens it would be only a few millimeters thick.

Several authors have proposed dispersing light before it reaches the Earth by putting a very large lens in space, perhaps at the L1 point between the Earth and the Sun. This plan was proposed in 1989 by J. T. Early.[10]

In 2004, physicist and science fiction author Gregory Benford calculated that a concave rotating Fresnel lens 1000 kilometres across, yet only a few millimeters thick, floating in space at the L1 point, would reduce the solar energy reaching the Earth by approximately 0.5% to 1%.[11]

The cost of such a lens has been disputed. At a science fiction convention in 2004, Benford estimated that it would cost about US$10 billion up front, and another $10 billion in supportive cost during its lifespan.[11]

One diffraction grating

A similar approach involves placing a very large diffraction grating (thin wire mesh) in space, perhaps at the L1 point between the Earth and the Sun. A proposal for a 3,000 ton diffraction mesh was made in 1997 by Edward Teller, Lowell Wood, and Roderick Hyde,[12] although in 2002 these same authors argued for blocking solar radiation in the stratosphere rather than in orbit given then-current space launch technologies.[13]

Spacecraft sunshades

The James Webb Space Telescope (JWST) infrared telescope has a layered sunshade to keep the telescope cold.

For spacecraft approaching the sun the sunshade is usually called a heatshield. Notable spacecraft [designs] with heatshields include :

  • Parker Solar Probe (was Solar Probe Plus), launched 2018 (carbon, carbon-foam, carbon sandwich heatshield)
  • Solar Orbiter, may launch 2020
  • Messenger, orbits Mercury, has a ceramic cloth sunshade
  • BepiColumbo, to orbit Mercury, with Optical Solar Reflectors (acting as a sunshade) on the Planetary Orbiter component.

See also

References

  1. ↑ Hickman, John. "The Political Economy of a Planetary Sunshade" Astropolitics: The International Journal of Space Politics and Policy (2018): 16(1):1-10. Retrieved 3-30-18.
  2. ↑ Gorvett, Zaria. "How a giant space umbrella could stop global warming". Retrieved 2016-12-13.
  3. ↑ "Space sunshade might be feasible in global warming emergency". EurekAlert. 2006-11-03. Retrieved 2010-11-11.
  4. ↑ "Global Sunshade". BBC News. 2007-02-19. Retrieved 2010-11-11.
  5. ↑ Tnenbaum, David (2007-04-23). "Pies in the Sky: A Solution to Global Warming". Astrobiology Magazine. Retrieved 2010-11-14.
  6. 1 2 3 Angel, Roger (2006-09-18). "Feasibility of cooling the Earth with a cloud of small spacecraft near the inner Lagrange point (L1)". PNAS. Retrieved 2010-11-14.
  7. ↑ Stiles, Lori. "Space sunshade might be feasible in global warming emergency". "Feasibility of cooling the Earth with a cloud of small spacecraft near L1,". Eurekalert. Retrieved 2011-04-28.
  8. ↑ Fisher, David (2006-11-11). "Sunshade in space". Australian Broadcasting Corporation. Retrieved 2010-11-11.
  9. ↑ "Space Sunshade Might Be Feasible In Global Warming Emergency" (Press release). University of Arizona. 2006-11-06. Retrieved 2009-04-29.
  10. ↑ J. T. Early (1989), "Space-Based Solar Shield To Offset Greenhouse Effect", Journal of the British Interplanetary Society, 42, pp. 567–569, Bibcode:1989JBIS...42..567E . This proposal is also discussed in footnote 23 of Edward Teller; Roderick Hyde & Lowell Wood (1997), Global Warming and Ice Ages: Prospects for Physics-Based Modulation of Global Change (PDF), Lawrence Livermore National Laboratory, retrieved 2010-10-30 .
  11. 1 2 See Russell Dovey, "Supervillainy: Astroengineering Global Warming and Bill Christensen, "Reduce Global Warming by Blocking Sunlight" Archived 2009-04-17 at the Wayback Machine..
  12. ↑ Edward Teller; Roderick Hyde & Lowell Wood (1997), Global Warming and Ice Ages: Prospects for Physics-Based Modulation of Global Change (PDF), Lawrence Livermore National Laboratory, retrieved 2010-10-30 . See pages 10–14 in particular.
  13. ↑ Edward Teller, Roderick Hyde & Lowell Wood (2002), Active Climate Stabilization: Practical Physics-Based Approaches to Prevention of Climate Change (PDF), Lawrence Livermore National Laboratory, retrieved 2010-10-30 .
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.