Seiko Epson Micro flying robot

The Micro Flying Robot (µFR) is the world’s smallest and lightest robot helicopter prototype, which was developed by Seiko Epson and demonstrated at the International Robot Exhibition in Tokyo in Nov 2003.[1] The purpose of its development was to demonstrate its micro-mechatronics technology and to explore the possible use of micro robots and the development of component technology applications.

Features and capabilities

The µFR is levitated by contra-rotating propellers powered by four 7x2x1-mm ultrasonic motors (originally developed for wristwatches) and is balanced in mid-air by means of a stabilizing mechanism that uses a linear actuator. Though the µFR is radio-controlled, it relies on power from an external battery via a power cable and thus its flying range is limited. The µFR includes two microprocessors, a bluetooth module, a gyro-sensor, an accelerometer and an image sensor.

Development of µFR-II

The µFR-II is the enhanced version of the µFR. It was developed in 2004 for full wireless operation paired with independent flight capability. The main challenge was the need to combine lighter weight with greater dynamic lift. Epson made the robot lighter by developing a new gyro-sensor[2] that is one-fifth the weight of its predecessor. Dynamic lift was boosted 30% by the introduction of more powerful ultra-thin ultrasonic motors and newly designed, optimally shaped main rotors.[3] The µFR-II includes two 32-bit RISC microcontrollers, an on-board lithium polymer battery, as well as an image sensor that can capture and transmit images via Bluetooth wireless connection. At the moment it has a flight time of just 3 minutes.

Specifications

µFR µFR-II
Power 3.5 V 4.2 V
Power Consumption 3 W 3.5 W
Diameter 130 mm 136 mm
Height 70 mm 85 mm
Weight 8.9 g 12.3 g
Levitation Power 13 g/f 17 g/f

Possible Applications.

· Security and Surveillance
· Disaster Rescue
· Space Exploration [4][5]

References

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.