S4M

S4M
Type Two-shot pistol
Place of origin Soviet Union
Service history
Used by Soviet Union
Wars Cold War
Production history
Produced 1965–present
Specifications
Length 5.8 in. (147 mm)[1]
Cartridge 7.62×63mm PZ / PZA / PZAM
Barrels 2
Action Single-action
Feed system None - single shot per barrel
Sights fixed

The S4M (Russian: С4М) was a Soviet insurgency weapon pistol, designed to be used for assassination.

It was a simple break-open, two-shot derringer, but the unique features came from its specialized ammunition, designed around a cut-down version of the 7.62×39mm rounds used in the Soviet AK-47. The casings of the round contained a piston-like plunger between the bullet and the powder that would move forward inside the casing when fired. The piston would push the round down the barrel and plug the end of the casing, completely sealing off any explosive gases in the casing. This, combined with the inherently low-velocity round resulted in a truly silent pistol. The nature of the gun and ammunition led to it being wildly inaccurate outside of point-blank range. To add further confusion and throw possible suspicion away from the assassin, the barrel rifling was designed to affect the bullet in such a way that ballistics experts would not only conclude that the round was fired from an AK-47, but that the round was fired from several hundred feet away.

Due to the politically devastating nature inherent in this design, the S4M was kept highly secret. Information on the pistol was not known by western governments until well after the end of the Cold War.

The S4M was succeeded by a less powerful, but otherwise fairly similar, MSP using the newer SP-3 ammunition in 7.62×39mm, which also used in the NRS knife.[2]

See also

References

  1. ↑ Popenker, Maxim (May 29, 2013). "Pistols Firing Internally Silenced Ammunition". Forgotten Weapons. Retrieved 15 June 2017.
  2. ↑ Maxim Popenker (2008), Special purpose small arms ammunition of USSR and Russia Archived 2012-10-09 at the Wayback Machine.; updated version of an article first appeared in the March 2005 issue of The Cartridge Researcher, the Journal of ECRA (the European Cartridge Research Association)


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.