Retriangulation of Great Britain

The Crow Knoll triangulation station at Crompton Moor is one of the concrete pillars erected by the Ordnance Survey during the retriangulation of Great Britain. It is possible (in clear weather) to see at least two other trig points from any one trig point.

The retriangulation of Great Britain was a triangulation project carried out between 1935 and 1962 that sought to improve the accuracy of maps made of Great Britain[1]. Data gathered from the retriangulation replaced data gathered during the Principal Triangulation of Great Britain, which had been performed between 1783 and 1851[2]. The retriangulation involved erecting around 6,500 concrete pillars (known as trig points) on British hilltops, which were used as reference points for the triangulation[3]. Today, use of the trig points and the results of the retriangulation have been replaced by a network of GNSS stations known as OS Net, which is able to achieve an accuracy of 3 millimetres (0.12 in) over the length of the country compared to 20 metres (66 ft) achievable by use of the trig points[4].

History

The retriangulation was begun in 1935 by the Director General of the Ordnance Survey, Major-General Malcolm MacLeod[1]. It was directed by the cartographer and mathematician Martin Hotine, head of the Trigonometrical and Levelling Division.

Erecting new trig points and making measurements frequently required materials and instruments to be carried on foot, up hills and mountains and to isolated islands, in all kinds of weather. The network of trig points was built and measured between 1936 and 1962, starting with a set of several hundred primary trig points, most of which were placed on high hills so as to be able to link to one another across long distances. In addition, a larger set of roughly six thousand secondary trig points were added to allow the construction of a finer mesh that extended the reference frame of the primary mesh over shorter distances.

The calculations were constrained; it was hoped to minimise the shifts from the coordinates based on the old triangulation. At eleven primary trig points from Dunnose on the Isle of Wight (456784 m E, 080150 m N) north to Great Whernside in Yorkshire (400202 E, 473904 N) the new lat-lons were adjusted to stay within a metre of the old ones. Once the new Latitude and Longitude of those eleven points were fixed the calculated location of every other point in the triangulation was based on them. By the time the retriangulation was completed, electronic distance measurement devices had come into use which could have greatly reduced the overall error (it now seems Great Britain is 20+ metres shorter than OSGB36 implies[citation needed]) but starting over from scratch was out of the question[citation needed].

Notes and references

  1. 1 2 "Our history". www.ordnancesurvey.co.uk. Retrieved 2018-05-04.
  2. ↑ L., H. G. (30 July 1914). "The Principal Triangulation of the United Kingdom". Nature. 93 (2335): 571–572. doi:10.1038/093571a0. ISSN 0028-0836.
  3. ↑ "In pictures: Mapping Great Britain". BBC News. 2016-04-18. Retrieved 2018-05-04.
  4. ↑ "Happy birthday to the Trig Pillar - 75 years young today". Ordnance Survey Blog. 2011-04-18. Retrieved 2018-05-04.

Bibliography

  • Ordnance Survey (1967). The history of the retriangulation of Great Britain 1935-1962 (PDF). London: Her Majesty's Stationery Office. Diagrams.
  • Owen, Tim; Pilbeam, Elaine (1992). Ordnance Survey, map makers to Britain since 1791. Southampton: Ordnance Survey (HMSO). ISBN 9780319002490. OCLC 28220563. Freely available online at the Ordnance Survew, Owen and Pilbeam
  • Seymour, W. A., ed. (1980). A History of the Ordnance Survey. Folkestone, England: Dawson. ISBN 0-7129-0979-6. OCLC 654935343. Freely available online at the Ordnance Survey, Seymour

See also

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.