Radne Raket 120

Raket 120
Type Single cylinder, two-stroke
National origin Sweden
Manufacturer Radne Motor AB
Major applications Powered hang gliders
Unit cost 916 (120 ES-RD model, 2015)[1]

The Radne Raket 120 (English: Rocket) is a lightweight single cylinder, two-stroke aircraft engine used for powered hang gliders, paramotors and ultralight aircraft that is built by Radne Motor AB of Haninge, Sweden.[2][3][4][5]

Design and development

The Raket 120 features electronic ignition and a Walbro carburetor. It weighs 6.8 kg (15 lb) and, due to its 13,000 rpm redline usually drives a propeller through a 3.6:1 reduction drive. The engine is equipped with a centrifugal clutch to allow running the engine without turning the propeller.[2][3][5]

Variants

Raket 120 Aero
Model with recoil starter.[3]
Raket 120 Aero ES
Model with electric starter.[4]

Applications

Specifications (Raket 120 Aero)

Data from Radne, Wasp Systems and The World Directory of Leisure Aviation 2011-12[2][3][5]

General characteristics

  • Type: two-stroke, single cylinder
  • Bore: 60 mm (2.4 in)
  • Stroke: 42 mm (1.7 in)
  • Displacement: 118.8 cc (7.2 cu in)
  • Length: 219 mm (8.6 in)
  • Width: 234 mm (9.2 in)
  • Height: 171 mm (6.7 in)
  • Dry weight: 6.8 kg (15 lb)

Components

Performance

References

  1. Tacke, Willi; Marino Boric; et al: World Directory of Light Aviation 2015-16, pages 260-261. Flying Pages Europe SARL, 2015. ISSN 1368-485X
  2. 1 2 3 Wasp Systems (n.d.). "Radne Racket". Archived from the original on 25 April 2012. Retrieved 19 November 2011.
  3. 1 2 3 4 Radne Motor AB (2011). "Raket 120 Aero". Retrieved 19 November 2011.
  4. 1 2 Radne Motor AB (2011). "Raket 120 Aero ES". Retrieved 19 November 2011.
  5. 1 2 3 Bayerl, Robby; Martin Berkemeier; et al: World Directory of Leisure Aviation 2011-12, pages 242-243. WDLA UK, Lancaster UK, 2011. ISSN 1368-485X
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.