Phoenix-RTOS

Phoenix-RTOS
Developer Phoenix Systems
Platforms IA-32, ARM, eSi-RISC
Official website http://www.phoesys.com/

Phoenix-RTOS is a real-time operating system designed for Internet of Things appliances. The main goal of the system is to facilitate the creation of "Software Defined Solutions".

History

Phoenix-RTOS is the successor to the Phoenix operating system, developed from 1999-2001 by Pawel Pisarczyk at the Department of Electronics and Information Technology at Warsaw University of Technology. Phoenix was originally implemented for IA-32 microprocessors and was adapted to the ARM7TDMI processor in 2003, and the PowerPC in 2004. The system is available under the GPL license.

Phoenix-RTOS 2.0

The decision to abandon the development of Phoenix and write the Phoenix-RTOS from scratch was taken by its creator in 2004. In 2010, the Phoenix Systems company was established, aiming to commercialize the system.

Phoenix-RTOS 2.0 is based on a monolithic kernel. Initially versions for the IA-32 processor and configurable eSi-RISC[1] were developed. In cooperation with NXP Semiconductors, Phoenix-RTOS 2.0 was also adapted to the Vybrid (ARM Cortex-A5) platform. This version is equipped with PRIME (Phoenix-PRIME) and the G3-PLC (Phoenix-G3) protocol support, used in Smart Grid networks.

Phoenix-RTOS runs applications designed and written for the Unix operating system.

Phoenix-RTOS 3.0

Phoenix-RTOS version 3.0 is based on a microkernel was expected to be completed in 2017. It is geared towards measuring devices with low power consumption. The main problem with the first implementation was low kernel modularity and difficulties with the management process of software development (device drivers, file system drivers).

HaaS modules

The Phoenix-RTOS can be equipped with HaaS (Hardware as a Software) modules that allow the implementation of rich devices functionality, e.g. modems. Existing HaaS modules include:

  1. Phoenix-PRIME - software implementation of PRIME PLC standard certified in 2014.[2][3]
  2. Phoenix-G3 - a software implementation of the G3-PLC standard.

Implementations

In 2016, Energa-Operator (based in Poland) installed 6.6k Data Concentrator Units with balancing meter functionality in its network, based on the Phoenix-RTOS.[4] License agreements to use the system in the mass production of smart meters have been signed.[5][6]

References

  1. ↑ "Phoenix Systems ports Phoenix-RTOS to EnSilica's eSi-RISC processor family". www.chipestimate.com. Retrieved 2016-11-29.
  2. ↑ "Phoenix-PRIME – the first certified pure software PRIME implementation for standard low-cost Kinetis microcontroller | SETsquared Partnership". www.setsquared.co.uk. Retrieved 2016-11-29.
  3. ↑ "Chipsets | PRIME Alliance". www.prime-alliance.org. Retrieved 2016-11-29.
  4. ↑ "ENERGA | Biuro Prasowe – Komunikat prasowy - ENERGA-Operator kupi 6.6 tys. zestawów koncentratorowo-bilansujących". media.energa.pl. Retrieved 2016-11-29.
  5. ↑ "PRIME expands it's presence on the Asian market with Phoenix-PRIME | PRIME Alliance". www.prime-alliance.org. Retrieved 2016-11-29.
  6. ↑ "Phoenix-PRIME will be implemented in the new line of intelligent metering appliances. | PRIME Alliance". www.prime-alliance.org. Retrieved 2016-11-29.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.