Phase-change material
A phase change material (PCM) is a substance with a high heat of fusion which, melting and solidifying at a certain temperature, is capable of storing and releasing large amounts of energy. Heat is absorbed or released when the material changes from solid to liquid and vice versa; thus, PCMs are classified as latent heat storage (LHS) units.
Characteristics and classification
Latent heat storage can be achieved through liquid→solid, solid→liquid, solid→gas and liquid→gas phase changes. However, only solid→liquid and liquid→solid phase changes are practical for PCMs. Although liquid–gas transitions have a higher heat of transformation than solid–liquid transitions, liquid→gas phase changes are impractical for thermal storage because large volumes or high pressures are required to store the materials in their gas phase. Solid–solid phase changes are typically very slow and have a relatively low heat of transformation.
Initially, solid–liquid PCMs behave like sensible heat storage (SHS) materials; their temperature rises as they absorb heat. Unlike conventional SHS materials, however, when PCMs reach the temperature at which they change phase (their melting temperature) they absorb large amounts of heat at an almost constant temperature. The PCM continues to absorb heat without a significant rise in temperature until all the material is transformed to the liquid phase. When the ambient temperature around a liquid material falls, the PCM solidifies, releasing its stored latent heat. A large number of PCMs are available in any required temperature range from −5 up to 190 °C.[1] Within the human comfort range between 20–30 °C, some PCMs are very effective. They store 5 to 14 times more heat per unit volume than conventional storage materials such as water, masonry or rock.[2]
Organic PCMs
Bio-Based, or Paraffin (CnH2n+2), or carbohydrate and lipid derived.[4][5][6]
- Advantages
- Freeze without much undercooling
- Ability to melt congruently
- Self nucleating properties
- Compatibility with conventional material of construction
- No segregation
- Chemically stable
- High heat of fusion
- Safe and non-reactive
- Recyclable
- Carbohydrate and lipid based PCMs can be produced from renewable sources
- Disadvantages
- Low thermal conductivity in their solid state. High heat transfer rates are required during the freezing cycle. Nano composites were found to yield an effective thermal conductivity increase up to 216%.[7][8]
- Volumetric latent heat storage capacity can be low
- Flammable. This can be partially alleviated by specialist containment, or by incorporating environmentally friendly fire retardants.
Inorganic
Salt hydrates (MnH2O)[9]
- Advantages
- High volumetric latent heat storage capacity
- Availability and low cost
- Sharp melting point
- High thermal conductivity
- High heat of fusion
- Non-flammable
- Disadvantages
- Incongruous melting and phase separation upon cycling which can cause a significant loss in latent heat enthalpy.[10]
- Corrosive to many other materials, such as metals.[11][12][13]
- Change of volume is very high
- Super cooling is major problem in solid–liquid transition
- Nucleating agents are needed and they often become inoperative after repeated cycling
Inorganic Eutectics
c-inorganic, inorganic-inorganic compounds
- Advantages
- Some inorganic eutectics have sharp melting point similar to pure substance.
- Volumetric storage density is slightly above organic compounds.
- Extra water principle can be used to avoid phase change degradation, involving dissolving the anhydrous salt during melting to result in a thickening of the liquid material so that it melts to a gel form; however, this can cause huge reduction in latent heat.
- Disadvantages
- They still have the same disadvantages as inorganic PCMs, such as reduced thermal performance upon cycling, corrosivity, high volume change, and high supercooling.
- Sharp crystals may form when the salt hydrate PCM solidifies, potentially causing leaks in cases of macro-encapsulation.
- Limited data is available on thermo-physical properties as the use of these materials is limited compared to organic PCMs.
Hygroscopic materials
Many natural building materials are hygroscopic, that is they can absorb (water condenses) and release water (water evaporates). The process is thus:
- Condensation (gas to liquid) ΔH<0; enthalpy decreases (exothermic process) gives off heat.
- Vaporization (liquid to gas) ΔH>0; enthalpy increases (endothermic process) absorbs heat (or cools).
Whilst this process liberates a small quantity of energy, large surfaces area allows significant (1–2 °C) heating or cooling in buildings. The corresponding materials are wool insulation, earth/clay render finishes,.
Solid-solid PCM materials
A specialised group of PCMs that undergo a solid/solid phase transition with the associated absorption and release of large amounts of heat. These materials change their crystalline structure from one lattice configuration to another at a fixed and well-defined temperature, and the transformation can involve latent heats comparable to the most effective solid/liquid PCMs. Such materials are useful because, unlike solid/liquid PCMs, they do not require nucleation to prevent supercooling. Additionally, because it is a solid/solid phase change, there is no visible change in the appearance of the PCM, and there are no problems associated with handling liquids, e.g. containment, potential leakage, etc. Currently the temperature range of solid-solid PCM solutions spans from -50 °C (-58 °F) up to +175 °C (347 °F).[15]
Selection criteria
Thermodynamic properties. The phase change material should possess:[16]
- Melting temperature in the desired operating temperature range
- High latent heat of fusion per unit volume
- High specific heat, high density and high thermal conductivity
- Small volume changes on phase transformation and small vapor pressure at operating temperatures to reduce the containment problem
- Congruent melting
- Kinetic properties
- High nucleation rate to avoid supercooling of the liquid phase
- High rate of crystal growth, so that the system can meet demands of heat recovery from the storage system
- Chemical properties
- Chemical stability
- Complete reversible freeze/melt cycle
- No degradation after a large number of freeze/melt cycle
- Non-corrosiveness, non-toxic, non-flammable and non-explosive materials
- Economic properties
- Low cost
- Availability
Thermophysical properties
Common PCMs
Material | Organic PCM |
Melting point, Tm |
Heat of fusion, ΔHfus kJ/kg |
Heat of fusion, ΔHfus MJ/m |
Specific heat, cp solid kJ/kg·K |
Specific heat, cp liquid kJ/kg·K |
Density, ρ solid kg/m3 |
Density, ρ liquid kg/m3 |
Thermal conductivity, k solid W/m·K |
Thermal conductivity, k liquid W/m·K |
VHC solid kJ/m3·K |
VHC liquid kJ/m3·K |
Thermal effusivity, e solid J/m2·K·s1/2 |
Cost USD/kg |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Water | No | 0 °C (32 °F) | 333.6 | 319.8 | 2.05 | 4.186 | 917 | 1,000 | 1.6[17]-2.22[18] | 1,880 | 4,186 | 1,890 | 0.001[19] | |
Sodium sulfate (Na2SO4·10H2O) | No | 32.4 °C (90.3 °F) | 252 | 0.05[20] | ||||||||||
NaCl·Na2SO4·10H2O | No | 18 °C (64 °F) | 286 | 0.05[20] | ||||||||||
Lauric acid | Yes[21][22] | 44.2 °C (111.6 °F)[23] | 211.6 | 197.7 | 1.76 | 2.27 | 1,007 | 862 | 1,772 | 1,957 | 1.60[24][25] | |||
TME(63%) / H2O(37%) | Yes[21][22] | 29.8 °C (85.6 °F) | 218.0 | 240.9 | 2.75 | 3.58 | 1,120 | 1,090 | 3,080 | 3,902 | ||||
Mn(NO3)2·6H2O / MnCl2·4H2O(4%) | No[26][27] | 15–25 °C (59–77 °F) | 125.9 | 221.8 | 2.34 | 2.78 | 1,795 | 1,728 | 4,200 | 4,804 | ||||
Na2SiO3·5H2O | No[26][27] | 72.2 °C (162.0 °F) | 267.0 | 364.5 | 3.83 | 4.57 | 1,450 | 1,280 | 0.103−0.128[28] | 5,554 | 5,850 | 801 | 8.04[29] | |
Aluminium | No | 660 °C (1,220 °F) | 396.9 | 1,007.2 | 0.8969 | 2,700 | 2,375 | 237[30][31] | 2,422 | ? | 23,960 | 2.05[32] | ||
Copper | No | 1,085 °C (1,985 °F) | 208.7 | 1,769.5 | 0.3846 | 8,940 | 8,020 | 401[33] | 3,438 | ? | 37,130 | 6.81[34] | ||
Gold | No | 1,064 °C (1,947 °F) | 63.72 | 1,166.3 | 0.129 | 19,300 | 17,310 | 318[35] | 2,491 | 28,140 | 34,298[34] | |||
Iron | No | 1,538 °C (2,800 °F) | 247.3 | 1,836.6 | 0.4495 | 7,874 | 6,980 | 80.4[36] | 3,539 | 16,870 | 0.324[37] | |||
Lead | No | 327 °C (621 °F) | 23.02 | 253.2 | 0.1286 | 11,340 | 10,660 | 35.3[38] | 1,459 | 7,180 | 2.115[34] | |||
Lithium | No | 181 °C (358 °F) | 432.2 | 226.0 | 3.5816 | 534 | 512 | 84.8[39] | 1,913 | 12,740 | 62.22[40] | |||
Silver | No | 962 °C (1,764 °F) | 104.6 | 1,035.8 | 0.235 | 10,490 | 9,320 | 429[41] | 2,465 | 32,520 | 493[34] | |||
Titanium | No | 1,668 °C (3,034 °F) | 295.6 | 1,273.5 | 0.5235 | 4,506 | 4,110 | 21.9[42] | 2,359 | 7,190 | 8.05[43] | |||
Zinc | No | 420 °C (788 °F) | 112.0 | 767.5 | 0.3896 | 7,140 | 6,570 | 116[44] | 2,782 | 17,960 | 2.16[34] | |||
NaNO 3 | No | 310 °C (590 °F) | 174 | [45] | ||||||||||
NaNO 2 | No | 282 °C (540 °F) | 212 | [45] | ||||||||||
NaOH | No | 318 °C (604 °F) | 158 | [45] | ||||||||||
KNO 3 | No | 337 °C (639 °F) | 116 | [45] | ||||||||||
KOH | No | 360 °C (680 °F) | 167 | [45] | ||||||||||
NaOH / Na 2CO 3(7.2%) | No | 283 °C (541 °F) | 340 | [45] | ||||||||||
NaCl(26.8%) / NaOH | No | 370 °C (698 °F) | 370 | [45] | ||||||||||
NaCl / KCL(32.4%) / LiCl(32.8%) | No | 346 °C (655 °F) | 281 | [45] | ||||||||||
NaCl(5.7%) / NaNO 3(85.5%) / Na 2SO 4 | No | 287 °C (549 °F) | 176 | [45] | ||||||||||
NaCl / NaNO 3(5.0%) | No | 284 °C (543 °F) | 171 | [45] | ||||||||||
NaCl(5.0%) / NaNO 3 | No | 282 °C (540 °F) | 212 | [45] | ||||||||||
NaCl(42.5%) / KCl(20.5%) / MgCl 2 | No | 385–393 °C (725–739 °F) | 410 | [45] | ||||||||||
KNO 3(10%) / NaNO 3 | No | 290 °C (554 °F) | 170 | [45] | ||||||||||
KNO 3 / KCl(4.5%) | No | 320 °C (608 °F) | 150 | [45] | ||||||||||
KNO 3 / KBr(4.7%) / KCl(7.3%) | No | 342 °C (648 °F) | 140 | [45] | ||||||||||
Paraffin 14-Carbons[46] | Yes | 5.5 °C (41.9 °F) | 228 | |||||||||||
Paraffin 15-Carbons[46] | Yes | 10 °C (50 °F) | 205 | |||||||||||
Paraffin 16-Carbons[46] | Yes | 16.7 °C (62.1 °F) | 237.1 | |||||||||||
Paraffin 17-Carbons[46] | Yes | 21.7 °C (71.1 °F) | 213 | |||||||||||
Paraffin 18-Carbons[46] | Yes | 28 °C (82 °F) | 244 | |||||||||||
Paraffin 19-Carbons[46] | Yes | 32 °C (90 °F) | 222 | |||||||||||
Paraffin 20-Carbons[46] | Yes | 36.7 °C (98.1 °F) | 246 | |||||||||||
Paraffin 21-Carbons[46] | Yes | 40.2 °C (104.4 °F) | 200 | |||||||||||
Paraffin 22-Carbons[46] | Yes | 44 °C (111 °F) | 249 | |||||||||||
Paraffin 23-Carbons[46] | Yes | 47.5 °C (117.5 °F) | 232 | |||||||||||
Paraffin 24-Carbons[46] | Yes | 50.6 °C (123.1 °F) | 255 | |||||||||||
Paraffin 25-Carbons[46] | Yes | 49.4 °C (120.9 °F) | 238 | |||||||||||
Paraffin 26-Carbons[46] | Yes | 56.3 °C (133.3 °F) | 256 | |||||||||||
Paraffin 27-Carbons[46] | Yes | 58.8 °C (137.8 °F) | 236 | |||||||||||
Paraffin 28-Carbons[46] | Yes | 61.6 °C (142.9 °F) | 253 | |||||||||||
Paraffin 29-Carbons[46] | Yes | 63.4 °C (146.1 °F) | 240 | |||||||||||
Paraffin 30-Carbons[46] | Yes | 65.4 °C (149.7 °F) | 251 | |||||||||||
Paraffin 31-Carbons[46] | Yes | 68 °C (154 °F) | 242 | |||||||||||
Paraffin 32-Carbons[46] | Yes | 69.5 °C (157.1 °F) | 170 | |||||||||||
Paraffin 33-Carbons[46] | Yes | 73.9 °C (165.0 °F) | 268 | |||||||||||
Paraffin 34-Carbons[46] | Yes | 75.9 °C (168.6 °F) | 269 | |||||||||||
Formic acid[46] | Yes | 7.8 °C (46.0 °F) | 247 | |||||||||||
Caprilic acid[46] | Yes | 16.3 °C (61.3 °F) | 149 | |||||||||||
Glycerin[46] | Yes | 17.9 °C (64.2 °F) | 198.7 | |||||||||||
p-Lattic acid[46] | Yes | 26 °C (79 °F) | 184 | |||||||||||
Methyl palmitate[46] | Yes | 29 °C (84 °F) | 205 | |||||||||||
Camphenilone[46] | Yes | 39 °C (102 °F) | 205 | |||||||||||
Docasyl bromide[46] | Yes | 40 °C (104 °F) | 201 | |||||||||||
Caprylone[46] | Yes | 40 °C (104 °F) | 259 | |||||||||||
Phenol[46] | Yes | 41 °C (106 °F) | 120 | |||||||||||
Heptadecanone[46] | Yes | 41 °C (106 °F) | 201 | |||||||||||
1-Cyclohexylooctadecane[46] | Yes | 41 °C (106 °F) | 218 | |||||||||||
4-Heptadacanone[46] | Yes | 41 °C (106 °F) | 197 | |||||||||||
p-Joluidine[46] | Yes | 43.3 °C (109.9 °F) | 167 | |||||||||||
Cyanamide[46] | Yes | 44 °C (111 °F) | 209 | |||||||||||
Methyl eicosanate[46] | Yes | 45 °C (113 °F) | 230 | |||||||||||
3-Heptadecanone[46] | Yes | 48 °C (118 °F) | 218 | |||||||||||
2-Heptadecanone[46] | Yes | 48 °C (118 °F) | 218 | |||||||||||
Hydrocinnamic acid[46] | Yes | 48 °C (118 °F) | 118 | |||||||||||
Cetyl acid[46] | Yes | 49.3 °C (120.7 °F) | 141 | |||||||||||
a-Nepthylamine[46] | Yes | 59 °C (138 °F) | 93 | |||||||||||
Camphene[46] | Yes | 50 °C (122 °F) | 238 | |||||||||||
O-Nitroaniline[46] | Yes | 50 °C (122 °F) | 93 | |||||||||||
9-Heptadecanone[46] | Yes | 51 °C (124 °F) | 213 | |||||||||||
Thymol[46] | Yes | 51.5 °C (124.7 °F) | 115 | |||||||||||
Methyl behenate[46] | Yes | 52 °C (126 °F) | 234 | |||||||||||
Diphenyl amine[46] | Yes | 52.9 °C (127.2 °F) | 107 | |||||||||||
p-Dichlorobenzene[46] | Yes | 53.1 °C (127.6 °F) | 121 | |||||||||||
Oxolate[46] | Yes | 54.3 °C (129.7 °F) | 178 | |||||||||||
Hypophosphoric acid[46] | Yes | 55 °C (131 °F) | 213 | |||||||||||
O-Xylene dichloride[46] | Yes | 55 °C (131 °F) | 121 | |||||||||||
ß-Chloroacetic acid[46] | Yes | 56 °C (133 °F) | 147 | |||||||||||
Chloroacetic acid[46] | Yes | 56 °C (133 °F) | 130 | |||||||||||
Nitro napthalene[46] | Yes | 56.7 °C (134.1 °F) | 103 | |||||||||||
Trimyristin[46] | Yes | 33 °C (91 °F) | 201 | |||||||||||
Heptaudecanoic acid[46] | Yes | 60.6 °C (141.1 °F) | 189 | |||||||||||
a-Chloroacetic acid[46] | Yes | 61.2 °C (142.2 °F) | 130 | |||||||||||
Bees wax[46] | Yes | 61.8 °C (143.2 °F) | 177 | |||||||||||
Glyolic acid[46] | Yes | 63 °C (145 °F) | 109 | |||||||||||
Glycolic acid[46] | Yes | 63 °C (145 °F) | 109 | |||||||||||
p-Bromophenol[46] | Yes | 63.5 °C (146.3 °F) | 86 | |||||||||||
Azobenzene[46] | Yes | 67.1 °C (152.8 °F) | 121 | |||||||||||
Acrylic acid[46] | Yes | 68 °C (154 °F) | 115 | |||||||||||
Dinto toluent (2,4)[46] | Yes | 70 °C (158 °F) | 111 | |||||||||||
Phenylacetic acid[46] | Yes | 76.7 °C (170.1 °F) | 102 | |||||||||||
Thiosinamine[46] | Yes | 77 °C (171 °F) | 140 | |||||||||||
Bromcamphor[46] | Yes | 77 °C (171 °F) | 174 | |||||||||||
Durene[46] | Yes | 79.3 °C (174.7 °F) | 156 | |||||||||||
Methly brombenzoate[46] | Yes | 81 °C (178 °F) | 126 | |||||||||||
Alpha napthol[46] | Yes | 96 °C (205 °F) | 163 | |||||||||||
Glautaric acid[46] | Yes | 97.5 °C (207.5 °F) | 156 | |||||||||||
p-Xylene dichloride[46] | Yes | 100 °C (212 °F) | 138.7 | |||||||||||
Catechol[46] | Yes | 104.3 °C (219.7 °F) | 207 | |||||||||||
Quinone[46] | Yes | 115 °C (239 °F) | 171 | |||||||||||
Actanilide[46] | Yes | 118.9 °C (246.0 °F) | 222 | |||||||||||
Succinic anhydride[46] | Yes | 119 °C (246 °F) | 204 | |||||||||||
Benzoic acid[46] | Yes | 121.7 °C (251.1 °F) | 142.8 | |||||||||||
Stibene[46] | Yes | 124 °C (255 °F) | 167 | |||||||||||
Benzamide[46] | Yes | 127.2 °C (261.0 °F) | 169.4 | |||||||||||
Acetic acid[46] | Yes | 16.7 °C (62.1 °F) | 184 | |||||||||||
Polyethylene glycol 600[46] | Yes | 20 °C (68 °F) | 146 | |||||||||||
Capric acid[46] | Yes | 36 °C (97 °F) | 152 | |||||||||||
Eladic acid[46] | Yes | 47 °C (117 °F) | 218 | |||||||||||
Pentadecanoic acid[46] | Yes | 52.5 °C (126.5 °F) | 178 | |||||||||||
Tristearin[46] | Yes | 56 °C (133 °F) | 191 | |||||||||||
Myristic acid[46] | Yes | 58 °C (136 °F) | 199 | |||||||||||
Palmatic acid[46] | Yes | 55 °C (131 °F) | 163 | |||||||||||
Stearic acid[46] | Yes | 69.4 °C (156.9 °F) | 199 | |||||||||||
Acetamide[46] | Yes | 81 °C (178 °F) | 241 | |||||||||||
Methyl fumarate[46] | Yes | 102 °C (216 °F) | 242 |
Volumetric heat capacity (VHC) J·m−3·K−1
Thermal inertia (I) = Thermal effusivity (e) J·m−2·K−1·s−1/2
Commercially available PCMs
Material | Supplier | Type | Form | Melting point, Tm |
Heat of fusion, ΔHfus kJ/kg |
Density, ρ solid kg/m3 |
Density, ρ liquid kg/m3 |
Thermal conductivity, k solid W/m·K |
Thermal conductivity, k liquid W/m·K |
Specific heat, cp solid kJ/kg·K |
Specific heat, cp liquid kJ/kg·K |
---|---|---|---|---|---|---|---|---|---|---|---|
0100- Q-50 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | −50 °C (−58 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0100- Q-45 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | −45 °C (−49 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0100- Q-40 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | −40 °C (−40 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0100- Q-35 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | −35 °C (−31 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0100- Q-30 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | −30 °C (−22 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0100- Q-27 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | −27 °C (−17 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0100- Q-25 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | −25 °C (−13 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0100- Q-22 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | −22 °C (−8 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0100- Q-20 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | −20 °C (−4 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0100- Q-15 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | −15 °C (5 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0100- Q-10 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | −10 °C (14 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0100- Q-05 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | −5 °C (23 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0200- Q1 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 1 °C (34 °F) | 325 | 910 | 980 | 1.1 | 0.58 | 4.2 | 4.1 |
0200- Q2 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 2 °C (36 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0200- Q4 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 4 °C (39 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0200- Q5 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 5 °C (41 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0200- Q6 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 6 °C (43 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0200- Q8 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 8 °C (46 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0300- Q10 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 10 °C (50 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0300- Q12 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 12 °C (54 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0300- Q14 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 14 °C (57 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0400- Q15 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 15 °C (59 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0400- Q16 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 16 °C (61 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0400- Q17 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 17 °C (63 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0400- Q18 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 18 °C (64 °F) | 200-235 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0400- Q19 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 19 °C (66 °F) | 200-235 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0400- Q20 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 20 °C (68 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0400- Q21 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 21 °C (70 °F) | 200-235 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0400- Q22 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 22 °C (72 °F) | 200-235 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0400- Q23 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 23 °C (73 °F) | 200-235 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0400- Q24 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 24 °C (75 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0400- Q25 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 25 °C (77 °F) | 200-235 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0400- Q26 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 26 °C (79 °F) | 200-235 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0500- Q27 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 27 °C (81 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0500- Q28 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 28 °C (82 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0500- Q29 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 29 °C (84 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0500- Q30 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 30 °C (86 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0500- Q32 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 32 °C (90 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0500- Q35 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 35 °C (95 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0500- Q37 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 37 °C (99 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0500- Q40 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 40 °C (104 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0500- Q42 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 42 °C (108 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0500- Q45 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 45 °C (113 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0500- Q50 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 50 °C (122 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0500- Q52 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 52 °C (126 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0500- Q54 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 54 °C (129 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0500- Q56 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 56 °C (133 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0500- Q58 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 58 °C (136 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0500- Q62 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 62 °C (144 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0500- Q65 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 65 °C (149 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0500- Q68 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 68 °C (154 °F) | 200-235 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0500- Q70 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 70 °C (158 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0500- Q72 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 72 °C (162 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0500- Q76 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 76 °C (169 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0500- Q79 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 79 °C (174 °F) | 200-230 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0500- Q82 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 82 °C (180 °F) | 200-240 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0500- Q85 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 85 °C (185 °F) | 200-240 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0500- Q87 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 87 °C (189 °F) | 200-240 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0500- Q89 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 89 °C (192 °F) | 200-240 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0500- Q91 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 91 °C (196 °F) | 200-240 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0500- Q93 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 93 °C (199 °F) | 200-240 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0500- Q95 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 95 °C (203 °F) | 200-240 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0500- Q97 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 97 °C (207 °F) | 200-240 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0500- Q99 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 99 °C (210 °F) | 200-240 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
0500- Q100 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 100 °C (212 °F) | 200-240 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
1000- Q105 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 105 °C (221 °F) | 200-240 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
1000- Q110 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 110 °C (230 °F) | 200-240 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
1000- Q114 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 114 °C (237 °F) | 200-240 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
1000- Q120 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 120 °C (248 °F) | 200-240 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
1000- Q125 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 125 °C (257 °F) | 200-240 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
1000- Q129 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 129 °C (264 °F) | 200-240 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
1000- Q134 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 134 °C (273 °F) | 220-250 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
1000- Q140 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 140 °C (284 °F) | 220-250 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
1000- Q144 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 144 °C (291 °F) | 220-250 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
1000- Q148 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 148 °C (298 °F) | 220-250 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
1000- Q152 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 152 °C (306 °F) | 220-250 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
1000- Q155 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 155 °C (311 °F) | 220-250 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
1000- Q159 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 159 °C (318 °F) | 220-280 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
1000- Q161 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 161 °C (322 °F) | 220-280 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
1000- Q169 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 169 °C (336 °F) | 220-280 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
1000- Q175 BioPCM | Phase Change Energy Solutions[47] |
Functionalized BioPCM | Bulk, Macro-encapsulated | 175 °C (347 °F) | 220-280 | 900-1250 | 850-1300 | 0.25-2.5 | 0.2-0.7 | 2.5-4.5 | 2.3-4.1 |
18 C⁰ Infinite R | Insolcorp[48] | Inorganic | Macro-encapsulated | 18 °C (64 °F) | 200 | 1540 | 0.54 | 1.09 | 3.14 | ||
21 C⁰ Infinite R | Insolcorp[48] | Inorganic | Macro-encapsulated | 21 °C (70 °F) | 200 | 1540 | 0.54 | 1.09 | 3.14 | ||
23 C⁰ Infinite R | Insolcorp[48] | Inorganic | Macro-encapsulated | 23 °C (73 °F) | 200 | 1540 | 0.54 | 1.09 | 3.14 | ||
25 C⁰ Infinite R | Insolcorp[48] | Inorganic | Macro-encapsulated | 25 °C (77 °F) | 200 | 1540 | 0.54 | 1.09 | 3.14 | ||
29 C⁰ Infinite R | Insolcorp[48] | Inorganic | Macro-encapsulated | 29 °C (84 °F) | 200 | 1540 | 0.54 | 1.09 | 3.14 | ||
savE HS 33N[49] | Pluss[50] | Inorganic | Bulk | −30 °C (−22 °F) | 224 | 1425 | |||||
savE HS 26N[51] | Pluss | Inorganic | Bulk | −24 °C (−11 °F) | 222 | 1200 | 3.6 | ||||
savE HS 23N[52] | Pluss | Inorganic | Bulk | −20 °C (−4 °F) | 210 | 1140 | 0.7 | 4.9 | 3.4 | ||
savE HS 18N[53] | Pluss | Inorganic | Bulk | −18 °C (0 °F) | 242 | 1095 | 0.44 | ||||
savE HS 15N[54] | Pluss | Inorganic | Bulk | −15 °C (5 °F) | 280 | 1070 | 0.53 | 5.26 | 3.4 | ||
savE HS 10N[55] | Pluss | Inorganic | Bulk | −10 °C (14 °F) | 230 | 1125 | 0.60 | 4.25 | 0.96 | ||
savE HS 7N[56] | Pluss | Inorganic | Bulk | −6 °C (21 °F) | 230 | 1120 | 0.55 | 1.76 | 3.2 | ||
savE HS 01[57] | Pluss | Inorganic | Bulk | 1 °C (34 °F) | 290 | 1010 | 0.55 | 2.2 | 3.9 | ||
savE OM 03[58] | Pluss | Organic | Bulk | 3.5 °C (38.3 °F) | 240 | 835 | 0.146 | 0.22 | 3 | ||
savE FS 03[59] | Pluss | Organic | Bulk | 3.6 °C (38.5 °F) | 214 | 0.16 | |||||
savE OM 05[60] | Pluss | Organic | Bulk | 5.5 °C (41.9 °F) | 130 | 845 | 0.135 | 0.3 | 2.37 | ||
savE FS 05[61] | Pluss | Organic | Bulk | 5.9 °C (42.6 °F) | 110 | 0.134 | |||||
savE OM 08[62] | Pluss | Organic | Bulk | 9 °C (48 °F) | 220 | 1050 | 0.168 | 0.235 | 3.1 | ||
savE OM 11[63] | Pluss | Organic | Bulk | 9.5 °C (49.1 °F) | 240 | 1060 | 0.118 | 0.235 | |||
savE OM 21[64] | Pluss | Organic | Bulk | 21 °C (70 °F) | 250 | 924 | 0.14 | 0.21 | 2.6 | ||
savE FS 21[65] | Pluss | Organic | Bulk | 21 °C (70 °F) | 130 | 0.3 | |||||
savE HS 21[66] | Pluss | Inorganic | Bulk | 22 °C (72 °F) | 185 | 1400 | 0.59 | 0.82 | 3.4 | ||
savE HS 22[67] | Pluss | Inorganic | Bulk | 23 °C (73 °F) | 185 | 1540 | 0.56 | 1.13 | 3.04 | ||
savE HS 24[68] | Pluss | Inorganic | Bulk | 25 °C (77 °F) | 185 | 1510 | 0.55 | 1.05 | 2.3 | ||
savE HS 29[69] | Pluss | Inorganic | Bulk | 29 °C (84 °F) | 190 | 1530 | 0.382 | 0.478 | 2.3 | ||
savE OM 29[70] | Pluss | Organic | Bulk | 29 °C (84 °F) | 229 | 870 | 0.172 | 0.293 | 3.9 | ||
savE FS 29[71] | Pluss | Organic | Bulk | 29 °C (84 °F) | 189 | 0.45 | |||||
savE OM 30[72] | Pluss | Organic | Bulk | 31 °C (88 °F) | 200 | 878 | 0.123 | 0.185 | 2.6 | ||
savE FS 30[73] | Pluss | Organic | Bulk | 31 °C (88 °F) | 170 | 0.496 | |||||
savE OM 32[74] | Pluss | Organic | Bulk | 32 °C (90 °F) | 200 | 870 | 0.145 | 0.219 | |||
savE HS 34[75] | Pluss | Inorganic | Bulk | 35 °C (95 °F) | 150 | 1850 | 0.47 | 0.5 | 2.4 | ||
savE OM 35[76] | Pluss | Organic | Bulk | 37 °C (99 °F) | 197 | 870 | 0.16 | 0.2 | |||
savE OM 37[77] | Pluss | Organic | Bulk | 37 °C (99 °F) | 210 | 860 | 0.13 | 0.16 | |||
savE OM 46[78] | Pluss | Organic | Bulk | 46 °C (115 °F) | 250 | 880 | 0.1 | 0.2 | |||
savE OM 48[79] | Pluss | Organic | Bulk | 48 °C (118 °F) | 275 | 875 | 0.12 | 0.2 | |||
savE OM 50[80] | Pluss | Organic | Bulk | 50.3 °C (122.5 °F) | 250 | 850 | 0.14 | 0.21 | 3.05 | ||
savE OM 55[81] | Pluss | Organic | Bulk | 55 °C (131 °F) | 210 | 840 | 0.1 | 0.16 | 3.05 | ||
savE OM 65[82] | Pluss | Organic | Bulk | 67 °C (153 °F) | 183 | 924 | 0.33 | 0.19 | 2.38 | ||
savE FSM 65[83] | Pluss | Organic | Bulk | 67 °C (153 °F) | 150 | 845 | 0.25 | ||||
savE HS 89[84] | Pluss | Inorganic | Bulk | 87 °C (189 °F) | 180 | 1630 | |||||
PureTemp -37 [85] | PureTemp LLC | Organic | Bulk | −37 °C (−35 °F) | 147 | 880 | 1.39 | ||||
PureTemp -23 | PureTemp LLC | Organic | Bulk | −23 °C (−9 °F) | 145 | 860 | 2.11 | ||||
PureTemp -21 [86] | PureTemp LLC | Organic | Bulk | −21 °C (−6 °F) | 240 | 1060 | 1.83 | ||||
PureTemp -17 | PureTemp LLC | Organic | Bulk | −17 °C (1 °F) | 145 | 860 | 1.74 | ||||
PureTemp -15 [87] | PureTemp LLC | Organic | Bulk | −15 °C (5 °F) | 286 | 1030 | 1.84 | ||||
PureTemp -12 | PureTemp LLC | Organic | Bulk | −12 °C (10 °F) | 168 | 870 | 1.86 | ||||
PureTemp -2 [88] | PureTemp LLC | Organic | Bulk | −5 °C (23 °F) | 150 | 860 | 1.66 | ||||
PureTemp 1 | PureTemp LLC | Organic | Bulk | 1 °C (34 °F) | 300 | 1000 | 2.32 | ||||
PureTemp 4 [89] | PureTemp LLC | Organic | Bulk | 4 °C (39 °F) | 187 | 880 | 2.26 | ||||
PureTemp 6 | PureTemp LLC | Organic | Bulk | 6 °C (43 °F) | 170 | 860 | 1.56 | ||||
PureTemp 8 [90] | PureTemp LLC | Organic | Bulk | 8 °C (46 °F) | 180 | 860 | 1.85 | ||||
PureTemp 12 | PureTemp LLC | Organic | Bulk | 12 °C (54 °F) | 185 | 860 | 1.76 | ||||
PureTemp 15 [91] | PureTemp LLC | Organic | Bulk | 15 °C (59 °F) | 165 | 860 | 2.25 | ||||
PureTemp 18 [92] | PureTemp LLC | Organic | Bulk | 18 °C (64 °F) | 189 | 860 | 1.47 | ||||
PureTemp 20 [93] | PureTemp LLC | Organic | Bulk | 20 °C (68 °F) | 180 | 860 | 2.59 | ||||
PureTemp 23 [94] | PureTemp LLC | Organic | Bulk | 23 °C (73 °F) | 203 | 830 | 1.84 | ||||
PureTemp 24 | PureTemp LLC | Organic | Bulk | 24 °C (75 °F) | 185 | 860 | 2.85 | ||||
PureTemp 25 [95] | PureTemp LLC | Organic | Bulk | 25 °C (77 °F) | 185 | 860 | 1.99 | ||||
PureTemp 27 [96] | PureTemp LLC | Organic | Bulk | 27 °C (81 °F) | 200 | 860 | 2.46 | ||||
PureTemp 28 [97] | PureTemp LLC | Organic | Bulk | 28 °C (82 °F) | 205 | 860 | 2.34 | ||||
PureTemp 29 [98] | PureTemp LLC | Organic | Bulk | 29 °C (84 °F) | 189 | 850 | 1.77 | ||||
PureTemp 33 | PureTemp LLC | Organic | Bulk | 33 °C (91 °F) | 185 | 850 | 2.34 | ||||
PureTemp 35 | PureTemp LLC | Organic | Bulk | 35 °C (95 °F) | 180 | 850 | 2.44 | ||||
PureTemp 37 [99] | PureTemp LLC | Organic | Bulk | 38 °C (100 °F) | 222 | 840 | 2.21 | ||||
PureTemp 48 [100] | PureTemp LLC | Organic | Bulk | 48 °C (118 °F) | 245 | 820 | 2.1 | ||||
PureTemp 53 [101] | PureTemp LLC | Organic | Bulk | 53 °C (127 °F) | 225 | 990 | 2.36 | ||||
PureTemp 58 [102] | PureTemp LLC | Organic | Bulk | 58 °C (136 °F) | 237 | 810 | 2.47 | ||||
PureTemp 60 [103] | PureTemp LLC | Organic | Bulk | 61 °C (142 °F) | 230 | 870 | 2.04 | ||||
PureTemp 63 [104] | PureTemp LLC | Organic | Bulk | 63 °C (145 °F) | 199 | 840 | 1.99 | ||||
PureTemp 68 [105] | PureTemp LLC | Organic | Bulk | 68 °C (154 °F) | 198 | 870 | 1.85 | ||||
PureTemp 108 | PureTemp LLC | Organic | Bulk | 108 °C (226 °F) | 180 | 800 | |||||
PureTemp 151 [106] | PureTemp LLC | Organic | Bulk | 151 °C (304 °F) | 170 | 1360 | 2.06 | ||||
Astorstat HA 17 | Honeywell[107] | Organic | Bulk | 21.7 °C (71.1 °F) | |||||||
Astorstat HA 18 | Honeywell | Organic | Bulk | 27.2 °C (81.0 °F) | |||||||
RT26 | Rubitherm GmbH[108] | Organic | Bulk | 24 °C (75 °F) | 232 | ||||||
RT27 | Rubitherm GmbH | Organic | Bulk | 28 °C (82 °F) | 206 | ||||||
Climsel C -21 | Climator[109] | Inorganic | Bulk | −21 °C (−6 °F) | 288 | 1300 | 0.6 | 3.6 | |||
Climsel C -18 | Climator | Inorganic | Bulk | −18 °C (0 °F) | 288 | 1300 | 0.6 | 3.6 | |||
Climsel C 7 | Climator | Inorganic | Bulk | 7 °C (45 °F) | 126 | 1400 | 0.6 | 3.6 | |||
Climsel C 10 | Climator | Inorganic | Bulk | 10.5 °C (50.9 °F) | 126 | 1400 | 0.6 | 3.6 | |||
Climsel C 21 | Climator | Inorganic | Bulk | 21 °C (70 °F) | 112 | 1380 | 0.6 | 3.6 | |||
Climsel C24 | Climator | Inorganic | Bulk | 24 °C (75 °F) | 151.3 | 1380 | 0.6 | 3.6 | |||
Climsel C28 | Climator | Inorganic | Bulk | 28 °C (82 °F) | 162.3 | 1420 | 0.6 | 3.6 | |||
Climsel C32 | Climator | Inorganic | Bulk | 32 °C (90 °F) | 162.3 | 1420 | 0.6 | 3.6 | |||
Climsel C48 | Climator | Inorganic | Bulk | 48 °C (118 °F) | 180 | 1360 | 0.6 | 3.6 | |||
Climsel C58 | Climator | Inorganic | Bulk | 58 °C (136 °F) | 288.5 | 1460 | 0.6 | 1.89 | |||
Climsel C70 | Climator | Inorganic | Bulk | 70 °C (158 °F) | 282.9 | 1400 | 0.6 | 3.6 | |||
STL27 | Mitsubishi Chemicals[110] | Inorganic | Bulk | 27 °C (81 °F) | 213 | ||||||
S27 | Cristopia[111] | Inorganic | Bulk | 27 °C (81 °F) | 207 | ||||||
TH 29 | TEAP[112] | Inorganic | Bulk | 29 °C (84 °F) | 188 | ||||||
RT 20 | Rubitherm GmbH | Organic | Bulk | 22 °C (72 °F) | 172 | ||||||
Climsel C23 | Climator | Inorganic | Bulk | 23 °C (73 °F) | 148 | 32 | |||||
RT 26 | Rubitherm GmbH | Organic | Bulk | 25 °C (77 °F) | 131 | ||||||
RT 30 | Rubitherm GmbH | Organic | Bulk | 28 °C (82 °F) | 206 | ||||||
RT 32 | Rubitherm GmbH | Organic | Bulk | 21 °C (70 °F) | 130 | ||||||
DS 5000 | Micronal[113] | Micro-encapsulated | 26 °C (79 °F) | 45 | |||||||
DS 5007 | Micronal | Micro-encapsulated | 23 °C (73 °F) | 41 | |||||||
DS 5030 | Micronal | Micro-encapsulated | 21 °C (70 °F) | 37 | |||||||
DS 5001 | Micronal | Micro-encapsulated | 26 °C (79 °F) | 110 | |||||||
DS 5008 | Micronal | Micro-encapsulated | 23 °C (73 °F) | 100 | |||||||
DS 5029 | Micronal | Micro-encapsulated | 21 °C (70 °F) | 90 | |||||||
RT -9 HC | Rubitherm GmbH | Organic | Bulk | −9 °C (16 °F) | 260 | ||||||
RT -4 | Rubitherm GmbH | Organic | Bulk | −4 °C (25 °F) | 179 | ||||||
RT 0 | Rubitherm GmbH | Organic | Bulk | 0 °C (32 °F) | 225 | ||||||
RT 2 HC | Rubitherm GmbH | Organic | Bulk | 2 °C (36 °F) | 205 | ||||||
RT 3 | Rubitherm GmbH | Organic | Bulk | 3 °C (37 °F) | 198 | ||||||
RT 3 HC | Rubitherm GmbH | Organic | Bulk | 3 °C (37 °F) | 250 | ||||||
RT 4 | Rubitherm GmbH | Organic | Bulk | 4 °C (39 °F) | 182 | ||||||
RT 5 | Rubitherm GmbH | Organic | Bulk | 5 °C (41 °F) | 180 | ||||||
RT 5 HC | Rubitherm GmbH | Organic | Bulk | 5 °C (41 °F) | 240 | ||||||
RT 6 | Rubitherm GmbH | Organic | Bulk | 6 °C (43 °F) | 175 | ||||||
RT 8 | Rubitherm GmbH | Organic | Bulk | 8 °C (46 °F) | 180 | ||||||
RT 9 | Rubitherm GmbH | Organic | Bulk | 9 °C (48 °F) | 160 | ||||||
RT 10 | Rubitherm GmbH | Organic | Bulk | 10 °C (50 °F) | 150 | ||||||
RT 10 HC | Rubitherm GmbH | Organic | Bulk | 10 °C (50 °F) | 195 | ||||||
RT 11 HC | Rubitherm GmbH | Organic | Bulk | 11 °C (52 °F) | 190 | ||||||
RT 12 | Rubitherm GmbH | Organic | Bulk | 12 °C (54 °F) | 150 | ||||||
RT 15 | Rubitherm GmbH | Organic | Bulk | 15 °C (59 °F) | 140 | ||||||
RT 18 HC | Rubitherm GmbH | Organic | Bulk | 18 °C (64 °F) | 250 | ||||||
RT 21 | Rubitherm GmbH | Organic | Bulk | 21 °C (70 °F) | 160 | ||||||
RT 21 HC | Rubitherm GmbH | Organic | Bulk | 21 °C (70 °F) | 190 | ||||||
RT 22 HC | Rubitherm GmbH | Organic | Bulk | 22 °C (72 °F) | 200 | ||||||
RT 24 | Rubitherm GmbH | Organic | Bulk | 24 °C (75 °F) | 150 | ||||||
RT 25 | Rubitherm GmbH | Organic | Bulk | 25 °C (77 °F) | 148 | ||||||
RT 25 HC | Rubitherm GmbH | Organic | Bulk | 25 °C (77 °F) | 230 | ||||||
RT 27 | Rubitherm GmbH | Organic | Bulk | 27 °C (81 °F) | 179 | ||||||
RT 28 HC | Rubitherm GmbH | Organic | Bulk | 28 °C (82 °F) | 245 | ||||||
RT 31 | Rubitherm GmbH | Organic | Bulk | 31 °C (88 °F) | 170 | ||||||
RT 35 | Rubitherm GmbH | Organic | Bulk | 35 °C (95 °F) | 170 | ||||||
RT 35 HC | Rubitherm GmbH | Organic | Bulk | 35 °C (95 °F) | 240 | ||||||
RT 42 | Rubitherm GmbH | Organic | Bulk | 42 °C (108 °F) | 174 | ||||||
RT 44 HC | Rubitherm GmbH | Organic | Bulk | 44 °C (111 °F) | 255 | ||||||
RT 47 | Rubitherm GmbH | Organic | Bulk | 47 °C (117 °F) | 170 | ||||||
RT 50 | Rubitherm GmbH | Organic | Bulk | 50 °C (122 °F) | 168 | ||||||
RT 52 | Rubitherm GmbH | Organic | Bulk | 52 °C (126 °F) | 173 | ||||||
RT 55 | Rubitherm GmbH | Organic | Bulk | 55 °C (131 °F) | 172 | ||||||
RT 58 | Rubitherm GmbH | Organic | Bulk | 58 °C (136 °F) | 160 | ||||||
RT 60 | Rubitherm GmbH | Organic | Bulk | 60 °C (140 °F) | 144 | ||||||
RT 62 | Rubitherm GmbH | Organic | Bulk | 62 °C (144 °F) | 146 | ||||||
RT 65 | Rubitherm GmbH | Organic | Bulk | 65 °C (149 °F) | 152 | ||||||
RT 70 HC | Rubitherm GmbH | Organic | Bulk | 70 °C (158 °F) | 230 | ||||||
RT 80 HC | Rubitherm GmbH | Organic | Bulk | 79 °C (174 °F) | 240 | ||||||
RT 82 | Rubitherm GmbH | Organic | Bulk | 82 °C (180 °F) | 176 | ||||||
RT 90 HC | Rubitherm GmbH | Organic | Bulk | 90 °C (194 °F) | 200 | ||||||
S117 | PlusICE[114] | Inorganic | Bulk | 117 °C (243 °F) | 160 | 1450 | 0.7 | 2.61 | |||
S89 | PlusICE | Inorganic | Bulk | 89 °C (192 °F) | 151 | 1550 | 0.67 | 2.48 | |||
S83 | PlusICE | Inorganic | Bulk | 83 °C (181 °F) | 141 | 1600 | 0.62 | 2.31 | |||
S72 | PlusICE | Inorganic | Bulk | 72 °C (162 °F) | 127 | 1666 | 0.58 | 2.13 | |||
S70 | PlusICE | Inorganic | Bulk | 70 °C (158 °F) | 110 | 1680 | 0.57 | 2.1 | |||
S58 | PlusICE | Inorganic | Bulk | 58 °C (136 °F) | 145 | 1505 | 0.69 | 2.55 | |||
S50 | PlusICE | Inorganic | Bulk | 50 °C (122 °F) | 100 | 1601 | 0.43 | 1.59 | |||
S46 | PlusICE | Inorganic | Bulk | 46 °C (115 °F) | 210 | 1587 | 0.45 | 2.41 | |||
S44 | PlusICE | Inorganic | Bulk | 44 °C (111 °F) | 100 | 1584 | 0.43 | 1.61 | |||
S34 | PlusICE | Inorganic | Bulk | 34 °C (93 °F) | 115 | 2100 | 0.52 | 2.1 | |||
S32 | PlusICE | Inorganic | Bulk | 32 °C (90 °F) | 200 | 1460 | 0.51 | 1.91 | |||
S30 | PlusICE | Inorganic | Bulk | 30 °C (86 °F) | 190 | 1304 | 0.48 | 1.9 | |||
S27 | PlusICE | Inorganic | Bulk | 27 °C (81 °F) | 183 | 1530 | 0.54 | 2.2 | |||
S25 | PlusICE | Inorganic | Bulk | 25 °C (77 °F) | 180 | 1530 | 0.54 | 2.2 | |||
S23 | PlusICE | Inorganic | Bulk | 23 °C (73 °F) | 175 | 1530 | 0.54 | 2.2 | |||
S21 | PlusICE | Inorganic | Bulk | 22 °C (72 °F) | 170 | 1530 | 0.54 | 2.2 | |||
S19 | PlusICE | Inorganic | Bulk | 19 °C (66 °F) | 160 | 1520 | 0.43 | 1.9 | |||
S17 | PlusICE | Inorganic | Bulk | 17 °C (63 °F) | 160 | 1525 | 0.43 | 1.9 | |||
S15 | PlusICE | Inorganic | Bulk | 15 °C (59 °F) | 160 | 1510 | 0.43 | 1.9 | |||
S13 | PlusICE | Inorganic | Bulk | 13 °C (55 °F) | 160 | 1515 | 0.43 | 1.9 | |||
S10 | PlusICE | Inorganic | Bulk | 10 °C (50 °F) | 155 | 1470 | 0.43 | 1.9 | |||
S8 | PlusICE | Inorganic | Bulk | 8 °C (46 °F) | 150 | 1475 | 0.44 | 1.9 | |||
S7 | PlusICE | Inorganic | Bulk | 7 °C (45 °F) | 150 | 1700 | 0.4 | 1.85 | |||
A164 | PlusICE | Organic | Bulk | 164 °C (327 °F) | 290 | 1500 | 2.42 | ||||
A155 | PlusICE | Organic | Bulk | 155 °C (311 °F) | 100 | 900 | 0.23 | 2.2 | |||
A144 | PlusICE | Organic | Bulk | 144 °C (291 °F) | 115 | 880 | 0.23 | 2.2 | |||
A133 | PlusICE | Organic | Bulk | 133 °C (271 °F) | 126 | 880 | 0.23 | 2.2 | |||
A118 | PlusICE | Organic | Bulk | 118 °C (244 °F) | 340 | 1450 | 2.7 | ||||
A95 | PlusICE | Organic | Bulk | 95 °C (203 °F) | 205 | 900 | 0.22 | 2.2 | |||
A82 | PlusICE | Organic | Bulk | 82 °C (180 °F) | 155 | 850 | 0.22 | 2.21 | |||
A70 | PlusICE | Organic | Bulk | 70 °C (158 °F) | 173 | 890 | 0.23 | 2.2 | |||
A62 | PlusICE | Organic | Bulk | 62 °C (144 °F) | 145 | 910 | 0.22 | 2.2 | |||
A60H | PlusICE | Organic | Bulk | 60 °C (140 °F) | 212 | 800 | 0.18 | 2.15 | |||
A60H | PlusICE | Organic | Bulk | 60 °C (140 °F) | 145 | 910 | 0.22 | 2.22 | |||
A58H | PlusICE | Organic | Bulk | 58 °C (136 °F) | 243 | 820 | 0.18 | 2.85 | |||
A58 | PlusICE | Organic | Bulk | 58 °C (136 °F) | 132 | 910 | 0.22 | 2.22 | |||
A55 | PlusICE | Organic | Bulk | 55 °C (131 °F) | 135 | 905 | 0.22 | 2.22 | |||
A53H | PlusICE | Organic | Bulk | 53 °C (127 °F) | 166 | 810 | 0.18 | 2.02 | |||
A53H | PlusICE | Organic | Bulk | 53 °C (127 °F) | 130 | 910 | 0.22 | 2.22 | |||
A52 | PlusICE | Organic | Bulk | 52 °C (126 °F) | 222 | 810 | 0.18 | 2.15 | |||
A50 | PlusICE | Organic | Bulk | 50 °C (122 °F) | 218 | 810 | 0.18 | 2.15 | |||
A48 | PlusICE | Organic | Bulk | 48 °C (118 °F) | 234 | 810 | 0.18 | 2.85 | |||
A46 | PlusICE | Organic | Bulk | 46 °C (115 °F) | 155 | 910 | 0.22 | 2.22 | |||
A44 | PlusICE | Organic | Bulk | 44 °C (111 °F) | 242 | 805 | 0.18 | 2.15 | |||
A43 | PlusICE | Organic | Bulk | 43 °C (109 °F) | 165 | 780 | 0.18 | 2.37 | |||
A42 | PlusICE | Organic | Bulk | 42 °C (108 °F) | 105 | 905 | 0.21 | 2.22 | |||
A40 | PlusICE | Organic | Bulk | 40 °C (104 °F) | 230 | 810 | 0.18 | 2.43 | |||
A39 | PlusICE | Organic | Bulk | 39 °C (102 °F) | 105 | 900 | 0.22 | 2.22 | |||
A37 | PlusICE | Organic | Bulk | 37 °C (99 °F) | 235 | 810 | 0.18 | 2.85 | |||
A36 | PlusICE | Organic | Bulk | 36 °C (97 °F) | 217 | 790 | 0.18 | 2.37 | |||
A32 | PlusICE | Organic | Bulk | 32 °C (90 °F) | 130 | 845 | 0.21 | 2.2 | |||
A29 | PlusICE | Organic | Bulk | 29 °C (84 °F) | 225 | 810 | 0.18 | 2.15 | |||
A28 | PlusICE | Organic | Bulk | 28 °C (82 °F) | 155 | 789 | 0.21 | 2.22 | |||
A26 | PlusICE | Organic | Bulk | 26 °C (79 °F) | 150 | 790 | 0.21 | 2.22 | |||
A25H | PlusICE | Organic | Bulk | 25 °C (77 °F) | 226 | 810 | 0.18 | 2.15 | |||
A25 | PlusICE | Organic | Bulk | 25 °C (77 °F) | 150 | 785 | 0.18 | 2.26 | |||
A24 | PlusICE | Organic | Bulk | 24 °C (75 °F) | 145 | 790 | 0.18 | 2.22 | |||
A23 | PlusICE | Organic | Bulk | 23 °C (73 °F) | 145 | 785 | 0.18 | 2.22 | |||
A22H | PlusICE | Organic | Bulk | 22 °C (72 °F) | 216 | 820 | 0.18 | 2.85 | |||
A22 | PlusICE | Organic | Bulk | 22 °C (72 °F) | 145 | 785 | 0.18 | 2.22 | |||
A17 | PlusICE | Organic | Bulk | 17 °C (63 °F) | 150 | 785 | 0.18 | 2.22 | |||
A16 | PlusICE | Organic | Bulk | 16 °C (61 °F) | 213 | 760 | 0.18 | 2.37 | |||
A15 | PlusICE | Organic | Bulk | 15 °C (59 °F) | 130 | 790 | 0.18 | 2.26 | |||
A9 | PlusICE | Organic | Bulk | 9 °C (48 °F) | 140 | 775 | 0.21 | 2.16 | |||
A8 | PlusICE | Organic | Bulk | 8 °C (46 °F) | 150 | 773 | 0.21 | 2.16 | |||
A6 | PlusICE | Organic | Bulk | 6 °C (43 °F) | 150 | 770 | 0.21 | 2.17 | |||
A4 | PlusICE | Organic | Bulk | 4 °C (39 °F) | 200 | 766 | 0.21 | 2.18 | |||
A3 | PlusICE | Organic | Bulk | 3 °C (37 °F) | 200 | 765 | 0.21 | 2.2 | |||
A2 | PlusICE | Organic | Bulk | 2 °C (36 °F) | 200 | 765 | 0.21 | 2.2 | |||
E0 | PlusICE | Eutectic | Bulk | 0 °C (32 °F) | 332 | 1000 | 0.58 | 4.19 | |||
E-2 | PlusICE | Eutectic | Bulk | −2 °C (28 °F) | 306 | 1070 | 0.58 | 3.8 | |||
E-3 | PlusICE | Eutectic | Bulk | −3.7 °C (25.3 °F) | 312 | 1060 | 0.6 | 3.84 | |||
E-6 | PlusICE | Eutectic | Bulk | −6 °C (21 °F) | 275 | 1110 | 0.56 | 3.83 | |||
E-10 | PlusICE | Eutectic | Bulk | −10 °C (14 °F) | 286 | 1140 | 0.56 | 3.33 | |||
E-11 | PlusICE | Eutectic | Bulk | −11.6 °C (11.1 °F) | 301 | 1090 | 0.57 | 3.55 | |||
E-12 | PlusICE | Eutectic | Bulk | −12.3 °C (9.9 °F) | 250 | 1110 | 0.56 | 3.47 | |||
E-14 | PlusICE | Eutectic | Bulk | −14.8 °C (5.4 °F) | 243 | 1220 | 0.53 | 3.51 | |||
E-15 | PlusICE | Eutectic | Bulk | −15 °C (5 °F) | 303 | 1060 | 0.53 | 3.87 | |||
E-19 | PlusICE | Eutectic | Bulk | −18.7 °C (−1.7 °F) | 282 | 1125 | 0.58 | 3.29 | |||
E-21 | PlusICE | Eutectic | Bulk | −20.6 °C (−5.1 °F) | 263 | 1240 | 0.51 | 3.13 | |||
E-22 | PlusICE | Eutectic | Bulk | −22 °C (−8 °F) | 234 | 1180 | 0.57 | 3.34 | |||
E-26 | PlusICE | Eutectic | Bulk | −26 °C (−15 °F) | 260 | 1250 | 0.58 | 3.67 | |||
E-29 | PlusICE | Eutectic | Bulk | −29 °C (−20 °F) | 222 | 1420 | 0.64 | 3.69 | |||
E-32 | PlusICE | Eutectic | Bulk | −32 °C (−26 °F) | 243 | 1290 | 0.56 | 2.95 | |||
E-34 | PlusICE | Eutectic | Bulk | −33.6 °C (−28.5 °F) | 240 | 1205 | 0.54 | 3.05 | |||
E-37 | PlusICE | Eutectic | Bulk | −36.5 °C (−33.7 °F) | 213 | 1500 | 0.54 | 3.15 | |||
E-50 | PlusICE | Eutectic | Bulk | −49.8 °C (−57.6 °F) | 218 | 1325 | 0.56 | 3.28 | |||
E-75 | PlusICE | Eutectic | Bulk | −75 °C (−103 °F) | 102 | 902 | 0.17 | 2.43 | |||
E-78 | PlusICE | Eutectic | Bulk | −78 °C (−108 °F) | 115 | 880 | 0.14 | 1.96 | |||
E-90 | PlusICE | Eutectic | Bulk | −90 °C (−130 °F) | 90 | 786 | 0.14 | 2.56 | |||
E-114 | PlusICE | Eutectic | Bulk | −114 °C (−173 °F) | 107 | 782 | 0.17 | 2.39 | |||
PCM-HS26N | SAVENRG[115] | Inorganic | Bulk | −26 °C (−15 °F) | 205 | 1200 | |||||
PCM-HS23N | SAVENRG | Inorganic | Bulk | −23 °C (−9 °F) | 200 | 1180 | |||||
PCM-HS10N | SAVENRG | Inorganic | Bulk | −10 °C (14 °F) | 220 | 1100 | |||||
PCM-HS07N | SAVENRG | Inorganic | Bulk | −7 °C (19 °F) | 230 | 1120 | |||||
PCM-HS01P | SAVENRG | Inorganic | Bulk | 0 °C (32 °F) | 290 | 1010 | |||||
PCM-OM05P | SAVENRG | Organic | Bulk | 5 °C (41 °F) | 198 | 770 | |||||
PCM-0M06P | SAVENRG | Organic | Bulk | 5.5 °C (41.9 °F) | 260 | 735 | |||||
PCM-0M08P | SAVENRG | Organic | Bulk | 8 °C (46 °F) | 190 | 1050 | |||||
PCM-0M11P | SAVENRG | Organic | Bulk | 11 °C (52 °F) | 260 | 1060 | |||||
PCM-0M21P | SAVENRG | Organic | Bulk | 21 °C (70 °F) | 120 | 1050 | |||||
PCM-H22P | SAVENRG | Inorganic | Bulk | 22 °C (72 °F) | 185 | 1540 | |||||
PCM-HS24P | SAVENRG | Inorganic | Bulk | 24 °C (75 °F) | 185 | 1540 | |||||
PCM-HS29P | SAVENRG | Inorganic | Bulk | 29 °C (84 °F) | 190 | 1550 | |||||
PCM-OM32P | SAVENRG | Organic | Bulk | 32 °C (90 °F) | 235 | 870 | |||||
PCM-OM35P | SAVENRG | Organic | Bulk | 35 °C (95 °F) | 197 | 870 | |||||
PCM-HS34P | SAVENRG | Inorganic | Bulk | 34 °C (93 °F) | 150 | 1850 | |||||
PCM-OM37P | SAVENRG | Organic | Bulk | 37 °C (99 °F) | 218 | 880 | |||||
PCM-OM46P | SAVENRG | Organic | Bulk | 46 °C (115 °F) | 245 | 860 | |||||
PCM-OM48P | SAVENRG | Organic | Bulk | 48 °C (118 °F) | 255 | 980 | |||||
PCM-OM53P | SAVENRG | Organic | Bulk | 53 °C (127 °F) | 192 | 860 | |||||
PCM-OM65P | SAVENRG | Organic | Bulk | 65 °C (149 °F) | 210 | 840 | |||||
PCM-HS89P | SAVENRG | Inorganic | Bulk | 89 °C (192 °F) | 180 | 1540 | |||||
MPCM -30 | Microtek[116] | Organic | Micro-encapsulated | −30 °C (−22 °F) | 145 | ||||||
MPCM -30D | Microtek | Organic | Micro-encapsulated | −30 °C (−22 °F) | 145 | ||||||
MPCM -10 | Microtek | Organic | Micro-encapsulated | −9.5 °C (14.9 °F) | 155 | ||||||
MPCM -10D | Microtek | Organic | Micro-encapsulated | −9.5 °C (14.9 °F) | 155 | ||||||
MPCM 6 | Microtek | Organic | Micro-encapsulated | 6 °C (43 °F) | 162 | ||||||
MPCM 6D | Microtek | Organic | Micro-encapsulated | 6 °C (43 °F) | 162 | ||||||
MPCM 18 | Microtek | Organic | Micro-encapsulated | 18 °C (64 °F) | 168 | ||||||
MPCM 18D | Microtek | Organic | Micro-encapsulated | 18 °C (64 °F) | 168 | ||||||
MPCM 28 | Microtek | Organic | Micro-encapsulated | 28 °C (82 °F) | 187.5 | ||||||
MPCM 28D | Microtek | Organic | Micro-encapsulated | 28 °C (82 °F) | 187.5 | ||||||
MPCM28D-IR | Microtek | Organic | Micro-encapsulated | 56 °C (133 °F) | 170 | ||||||
MPCM 37 | Microtek | Organic | Micro-encapsulated | 37 °C (99 °F) | 195 | ||||||
MPCM 37D | Microtek | Organic | Micro-encapsulated | 37 °C (99 °F) | 195 | ||||||
MPCM 43D | Microtek | Organic | Micro-encapsulated | 43 °C (109 °F) | 195 | ||||||
MPCM 56D | Microtek | Organic | Micro-encapsulated | 56 °C (133 °F) | 170 | ||||||
Latest 29 T | TEAP | Inorganic | Bulk | 28 °C (82 °F) | 175 | 1490 | 1 | 2 | |||
Latest 25 T | TEAP | Inorganic | Bulk | 24 °C (75 °F) | 175 | 1490 | 1 | 2 | |||
Latest 20 T | TEAP | Inorganic | Bulk | 19 °C (66 °F) | 175 | 1490 | 1 | 2 | |||
Latest 18 T | TEAP | Inorganic | Bulk | 17 °C (63 °F) | 175 | 1490 | 1 | 2 | |||
CrodaTherm™ 5[117] | Croda International Plc | Organic | Bulk | 5 °C (41 °F) | 191 | ||||||
CrodaTherm™ 6.5[117] | Croda International Plc | Organic | Bulk | 6.8 °C (44.2 °F) | 184 | ||||||
CrodaTherm™ 15[117] | Croda International Plc | Organic | Bulk | 15 °C (59 °F) | 177 | ||||||
CrodaTherm™ 21[117] | Croda International Plc | Organic | Bulk | 21 °C (70 °F) | 176 | ||||||
CrodaTherm™ 29[117] | Croda International Plc | Organic | Bulk | 29 °C (84 °F) | 207 | ||||||
CrodaTherm™ 53[117] | Croda International Plc | Organic | Bulk | 53 °C (127 °F) | 226 |
The above dataset is also available as an Excel spreadsheet from UCLA Engineering
Technology, development and encapsulation
The most commonly used PCMs are salt hydrates, fatty acids and esters, and various paraffins (such as octadecane). Recently also ionic liquids were investigated as novel PCMs.
As most of the organic solutions are water-free, they can be exposed to air, but all salt based PCM solutions must be encapsulated to prevent water evaporation or uptake. Both types offer certain advantages and disadvantages and if they are correctly applied some of the disadvantages becomes an advantage for certain applications.
They have been used since the late 19th century as a medium for the thermal storage applications. They have been used in such diverse applications as refrigerated transportation[118] for rail[119] and road applications[120] and their physical properties are, therefore, well known.
Unlike the ice storage system, however, the PCM systems can be used with any conventional water chiller both for a new or alternatively retrofit application. The positive temperature phase change allows centrifugal and absorption chillers as well as the conventional reciprocating and screw chiller systems or even lower ambient conditions utilizing a cooling tower or dry cooler for charging the TES system.
The temperature range offered by the PCM technology provides a new horizon for the building services and refrigeration engineers regarding medium and high temperature energy storage applications. The scope of this thermal energy application is wide-ranging of solar heating, hot water, heating rejection, i.e. cooling tower and dry cooler circuitry thermal energy storage applications.
Since PCMs transform between solid–liquid in thermal cycling, encapsulation[121] naturally become the obvious storage choice.
- Encapsulation of PCMs
- Macro-encapsulation: Early development of macro-encapsulation with large volume containment failed due to the poor thermal conductivity of most PCMs. PCMs tend to solidify at the edges of the containers preventing effective heat transfer.
- Micro-encapsulation: Micro-encapsulation on the other hand showed no such problem. It allows the PCMs to be incorporated into construction materials, such as concrete, easily and economically. Micro-encapsulated PCMs also provide a portable heat storage system. By coating a microscopic sized PCM with a protective coating, the particles can be suspended within a continuous phase such as water. This system can be considered a phase change slurry (PCS).
- Molecular-encapsulation is another technology, developed by Dupont de Nemours that allows a very high concentration of PCM within a polymer compound. It allows storage capacity up to 515 kJ/m2 for a 5 mm board (103 MJ/m3). Molecular-encapsulation allows drilling and cutting through the material without any PCM leakage.
As phase change materials perform best in small containers, therefore they are usually divided in cells. The cells are shallow to reduce static head – based on the principle of shallow container geometry. The packaging material should conduct heat well; and it should be durable enough to withstand frequent changes in the storage material's volume as phase changes occur. It should also restrict the passage of water through the walls, so the materials will not dry out (or water-out, if the material is hygroscopic). Packaging must also resist leakage and corrosion. Common packaging materials showing chemical compatibility with room temperature PCMs include stainless steel, polypropylene and polyolefin.
Thermal composites
Thermal-composites is a term given to combinations of phase change materials (PCMs) and other (usually solid) structures. A simple example is a copper-mesh immersed in a paraffin-wax. The copper-mesh within parraffin-wax can be considered a composite material, dubbed a thermal-composite. Such hybrid materials are created to achieve specific overall or bulk properties.
Thermal conductivity is a common property which is targeted for maximisation by creating thermal composites. In this case the basic idea is to increase thermal conductivity by adding a highly conducting solid (such as the copper-mesh) into the relatively low conducting PCM thus increasing overall or bulk (thermal) conductivity. If the PCM is required to flow, the solid must be porous, such as a mesh.
Solid composites such as fibre-glass or kevlar-pre-preg for the aerospace industry usually refer to a fibre (the kevlar or the glass) and a matrix (the glue which solidifies to hold fibres and provide compressive strength). A thermal composite is not so clearly defined, but could similarly refer to a matrix (solid) and the PCM which is of course usually liquid and/or solid depending on conditions. They are also meant to discover minor elements in the earth.
Applications
Applications[1][124] of phase change materials include, but are not limited to:
- Thermal energy storage
- Solar cooking
- Cold Energy Battery
- Conditioning of buildings, such as 'ice-storage'
- Cooling of heat and electrical engines
- Cooling: food, beverages, coffee, wine, milk products, green houses
- Medical applications: transportation of blood, operating tables, hot-cold therapies, treatment of birth asphyxia[122]
- Human body cooling under bulky clothing or costumes.
- Waste heat recovery
- Off-peak power utilization: Heating hot water and Cooling
- Heat pump systems
- Passive storage in bioclimatic building/architecture (HDPE, paraffin)
- Smoothing exothermic temperature peaks in chemical reactions
- Solar power plants
- Spacecraft thermal systems
- Thermal comfort in vehicles
- Thermal protection of electronic devices
- Thermal protection of food: transport, hotel trade, ice-cream, etc.
- Textiles used in clothing
- Computer cooling
- Turbine Inlet Chilling with thermal energy storage
- Telecom shelters in tropical regions. They protect the high-value equipment in the shelter by keeping the indoor air temperature below the maximum permissible by absorbing heat generated by power-hungry equipment such as a Base Station Subsystem. In case of a power failure to conventional cooling systems, PCMs minimize use of diesel generators, and this can translate into enormous savings across thousands of telecom sites in tropics.
Fire and safety issues
Some phase change materials are suspended in water, and are relatively nontoxic. Others are hydrocarbons or other flammable materials, or are toxic. As such, PCMs must be selected and applied very carefully, in accordance with fire and building codes and sound engineering practices. Because of the increased fire risk, flamespread, smoke, potential for explosion when held in containers, and liability, it may be wise not to use flammable PCMs within residential or other regularly occupied buildings. Phase change materials are also being used in thermal regulation of electronics.
See also
References
- 1 2 Kenisarin, M; Mahkamov, K (2007). "Solar energy storage using phase change materials". Renewable and Sustainable Energy Reviews. 11 (9): 1913–1965. doi:10.1016/j.rser.2006.05.005.
- ↑ Sharma, Atul; Tyagi, V.V.; Chen, C.R.; Buddhi, D. (2009). "Review on thermal energy storage with phase change materials and applications". Renewable and Sustainable Energy Reviews. 13 (2): 318–345. doi:10.1016/j.rser.2007.10.005.
- ↑ "ENRG Blanket powered by BioPCM". Phase Change Energy Solutions. Retrieved March 12, 2018.
- ↑ "Heat storage systems" (PDF) by Mary Anne White, brings a list of advantages and disadvantages of Paraffin heat storage. A more complete list can be found in AccessScience website from McGraw-Hill, DOI 10.1036/1097-8542.YB020415, last modified: March 25, 2002 based on 'Latent heat storage in concrete II, Solar Energy Materials, Hawes DW, Banu D, Feldman D, 1990, 21, pp.61–80.
- ↑ Floros, Michael C.; Kaller, Kayden L. C.; Poopalam, Kosheela D.; Narine, Suresh S. (2016-12-01). "Lipid derived diamide phase change materials for high temperature thermal energy storage". Solar Energy. 139: 23–28. Bibcode:2016SoEn..139...23F. doi:10.1016/j.solener.2016.09.032.
- ↑ Agyenim, Francis; Eames, Philip; Smyth, Mervyn (2011-01-01). "Experimental study on the melting and solidification behaviour of a medium temperature phase change storage material (Erythritol) system augmented with fins to power a LiBr/H2O absorption cooling system". Renewable Energy. 36 (1): 108–117. doi:10.1016/j.renene.2010.06.005.
- ↑ Fleishcher, A.S. (2014). "Improved heat recovery from paraffn-based phase change materials due to the presence of percolating graphene networks". Improved heat recovery from paraffn-based phase change materials due to the presence of percolating graphene networks. 79: 324–333.
- ↑ (2015). Thermal energy storage using phase change materials: fundamentals and applications. Springer
- ↑ See above: 'Heat Storage Systems' (Mary Anne White), page 2
- ↑ Cantor, S. (1978). "DSC study of melting and solidification of salt hydrates". Thermochimica Acta. 26: 39–47.
- ↑ olé, A.; Miró, L.; Barreneche, C.; Martorell, I.; Cabeza, L.F. (2015). "Corrosion of metals and salt hydrates used for thermochemical energy storage". Renewable Energy. 75: 519–523.
- ↑ A. Sharma; V. Tyagi; C. Chen; D. Buddhi (February 2009). "Review on thermal energy storage with phase change materials and applications". Renewable and Sustainable Energy Reviews: 318–345.
- ↑ Sharma, Someshower Dutt; Kitano, Hiroaki; Sagara, Kazunobu (2004). "Phase Change Materials for Low Temperature Solar Thermal Applications" (PDF). Res. Rep. Fac. Eng. Mie Univ. 29: 31–64.
- ↑ "Infinite R™". Insolcorp, Inc. Retrieved 2017-03-01.
- ↑ "Phase Change Energy Solutions PhaseStor". Phase Change Energy Solutions. Retrieved February 28, 2018.
- ↑ Pasupathy, A; Velraj, R; Seeniraj, R (2008). "Phase change material-based building architecture for thermal management in residential and commercial establishments". Renewable and Sustainable Energy Reviews. 12: 39–64. doi:10.1016/j.rser.2006.05.010.
- ↑ HyperPhysics, most from Young, Hugh D., University Physics, 7th Ed., Addison Wesley, 1992. Table 15-5. (most data should be at 293 K (20 °C; 68 °F))
- ↑ Ice – Thermal Properties. Engineeringtoolbox.com. Retrieved on 2011-06-05.
- ↑ Matthew Boesler (July 12, 2013). "Bottled Water Costs 2000 Times As Much As Tap Water". Business Insider. Retrieved 2018-06-01.
- 1 2 "Sodium Sulfate-Sodium Sulfate Manufacturers, Suppliers and Exporters on Alibaba.comSulphate".
- 1 2 Sarı, A (2002). "Thermal and heat transfer characteristics in a latent heat storage system using lauric acid". Energy Conversion and Management. 43 (18): 2493–2507. doi:10.1016/S0196-8904(01)00187-X.
- 1 2 H. Kakuichi et al., IEA annex 10 (1999)
- ↑ Beare-Rogers, J.; Dieffenbacher, A.; Holm, J.V. (2001). "Lexicon of lipid nutrition (IUPAC Technical Report)". Pure and Applied Chemistry. 73 (4): 685–744. doi:10.1351/pac200173040685.
- ↑ "lauric acid Q/MHD002-2006 lauric acid CN;SHN products". Alibaba.com. Retrieved 2010-02-24.
- ↑ "Fatty Acids – Fractioned (Asia Pacific) Price Report – Chemical pricing information". ICIS Pricing. Retrieved 2010-03-10.
- 1 2 Nagano, K (2003). "Thermal characteristics of manganese (II) nitrate hexahydrate as a phase change material for cooling systems". Applied Thermal Engineering. 23 (2): 229–241. doi:10.1016/S1359-4311(02)00161-8.
- 1 2 Yinping, Zhang; Yi, Jiang; Yi, Jiang (1999). "A simple method, the -history method, of determining the heat of fusion, specific heat and thermal conductivity of phase-change materials". Measurement Science and Technology. 10 (3): 201–205. Bibcode:1999MeScT..10..201Y. doi:10.1088/0957-0233/10/3/015.
- ↑ Kalapathy, Uruthira; Proctor, Andrew; Shultz, John (2002-12-10). "Silicate Thermal Insulation Material from Rice Hull Ash". Industrial & Engineering Chemistry Research. 42 (1): 46–49. doi:10.1021/ie0203227.
- ↑ Sodium Silicate (Water Glass). Sheffield-pottery.com. Retrieved on 2011-06-05.
- ↑ Hukseflux Thermal Sensors. Hukseflux.com. Retrieved on 2011-06-05.
- ↑ Aluminium. Goodefellow. Web.archive.org (2008-11-13). Retrieved on 2011-06-05.
- ↑ "Aluminum Prices, London Metal Exchange (LME) Aluminum Alloy Prices, COMEX and Shanghai Aluminum Prices". 23 February 2010. Retrieved 2010-02-24.
- ↑ Copper. Goodfellow. Web.archive.org (2008-11-16). Retrieved on 2011-06-05.
- 1 2 3 4 5 "Metal Prices and News". 23 February 2010. Retrieved 2010-02-24.
- ↑ Gold. Goodfellow. Web.archive.org (2008-11-15). Retrieved on 2011-06-05.
- ↑ Iron. Goodfellow. Web.archive.org (2008-11-18). Retrieved on 2011-06-05.
- ↑ "Iron Page". 7 December 2007. Retrieved 2010-02-24.
- ↑ Lead. Goodfellow. Web.archive.org (2008-11-18). Retrieved on 2011-06-05.
- ↑ Lithium. Goodfellow. Web.archive.org (2008-11-18). Retrieved on 2011-06-05.
- ↑ "Historical Price Query". August 14, 2009. Retrieved 2010-02-24.
- ↑ Silver. Goodfellow. Web.archive.org (2008-11-17). Retrieved on 2011-06-05.
- ↑ Titanium. Goodfellow. Web.archive.org (2008-11-15). Retrieved on 2011-06-05.
- ↑ "Titanium Page". 28 December 2007. Retrieved 2010-02-24.
- ↑ Zinc. Goodfellow. Web.archive.org (2008-11-18). Retrieved on 2011-06-05.
- 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Tamme, Rainer. Phase Change - Storage Systems (PDF). Workshop on Thermal Storage for Trough Power Systems — February 20–21, 2003, Golden CO, USA. Archived from the original (PDF) on October 23, 2011.
- 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 Atul Sharma; V. V. Tyagi; C. R. Chen; D. Buddhi (February 2009). "Review on thermal energy storage with phase change materials and applications". Renewable and Sustainable Energy Reviews. 13 (2): 318–345. doi:10.1016/j.rser.2007.10.005.
- 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 "BioPCM®". Phase Change Energy Solutions, Inc. Retrieved February 21, 2018.
- 1 2 3 4 5 "Infinite R™". Insolcorp, LLC. Retrieved 2016-08-31.
- ↑ "TECHNICAL DATA SHEET OF HS 33N" (PDF).
- ↑ "Pluss". Pluss Advanced Technologies Pvt. Ltd.
- ↑ "TECHNICAL DATA SHEET – savE HS 26N" (PDF).
- ↑ "TECHNICAL DATA SHEET OF savE HS23N" (PDF).
- ↑ "TECHNICAL DATA SHEET OF savE® HS18N" (PDF).
- ↑ "TECHNICAL DATA SHEET OF savE HS15N" (PDF).
- ↑ "TECHNICAL DATA SHEET OF savE® HS10N" (PDF).
- ↑ "TECHNICAL DATA SHEET – savE HS 7N" (PDF).
- ↑ "TECHNICAL DATA SHEET OF savE® HS01" (PDF).
- ↑ "TECHNICAL DATA SHEET – savE OM 03" (PDF).
- ↑ "TECHNICAL DATA SHEET OF savE® FS03" (PDF).
- ↑ "TECHNICAL DATA SHEET – savE OM 05" (PDF).
- ↑ "TECHNICAL DATA SHEET OF savE® FS05" (PDF).
- ↑ "TECHNICAL DATA SHEET – savE OM08" (PDF).
- ↑ "TECHNICAL DATA SHEET – savE OM 11" (PDF).
- ↑ "TECHNICAL DATA SHEET – savE OM 21" (PDF).
- ↑ "TECHNICAL DATA SHEET OF savE® FS21" (PDF).
- ↑ "TECHNICAL DATA SHEET – savE HS 21" (PDF).
- ↑ "TECHNICAL DATA SHEET – savE HS 22" (PDF).
- ↑ "TECHNICAL DATA SHEET – savE HS 24" (PDF).
- ↑ "TECHNICAL DATA SHEET – savE HS 29" (PDF).
- ↑ "TECHNICAL DATA SHEET OF savE® OM29" (PDF).
- ↑ "TECHNICAL DATA SHEET OF savE® FS29" (PDF).
- ↑ "TECHNICAL DATA SHEET OF savE® OM30" (PDF).
- ↑ "TECHNICAL DATA SHEET OF savE® FS30" (PDF).
- ↑ "TECHNICAL DATA SHEET – savE OM 32" (PDF).
- ↑ "TECHNICAL DATA SHEET – savE HS 34" (PDF).
- ↑ "TECHNICAL DATA SHEET – savE OM 35a" (PDF).
- ↑ "TECHNICAL DATA SHEET OF savE® OM37" (PDF).
- ↑ "TECHNICAL DATA SHEET OF savE® OM46" (PDF).
- ↑ "TECHNICAL DATA SHEET OF savE® OM48" (PDF).
- ↑ "TECHNICAL DATA SHEET OF savE® OM50" (PDF).
- ↑ "TECHNICAL DATA SHEET OF savE® OM55" (PDF).
- ↑ "TECHNICAL DATA SHEET OF savE® OM65" (PDF).
- ↑ "TECHNICAL DATA SHEET OF savE® FSM65" (PDF).
- ↑ "TECHNICAL DATA SHEET OF savE® HS89" (PDF).
- ↑ "PureTemp -37 technical data sheet". PureTemp.
- ↑ "PureTemp -21 technical data sheet". PureTemp.
- ↑ "PureTemp -15 technical data sheet". PureTemp.
- ↑ "PureTemp -2 technical data sheet". PureTemp.
- ↑ "PureTemp 4 technical data sheet". PureTemp.
- ↑ "PureTemp 8 technical data sheet". PureTemp.
- ↑ "PureTemp 15 technical data sheet". PureTemp.
- ↑ "PureTemp 18 technical data sheet". PureTemp.
- ↑ "PureTemp 20 technical data sheet". PureTemp.
- ↑ "PureTemp 23 technical data sheet". PureTemp.
- ↑ "PureTemp 25 technical data sheet". PureTemp.
- ↑ "PureTemp 27 technical data sheet". PureTemp.
- ↑ "PureTemp 28 technical data sheet". PureTemp.
- ↑ "PureTemp 29 technical data sheet". PureTemp.
- ↑ "PureTemp 37 technical data sheet". PureTemp.
- ↑ "PureTemp 48 technical data sheet". PureTemp.
- ↑ "PureTemp 53 technical data sheet". PureTemp.
- ↑ "PureTemp 58 technical data sheet". PureTemp.
- ↑ "PureTemp 60 technical data sheet". PureTemp.
- ↑ "PureTemp 64 technical data sheet". PureTemp.
- ↑ "PureTemp 68 technical data sheet". PureTemp.
- ↑ "PureTemp 151 technical data sheet". PureTemp.
- ↑ "Honeywell, Inc".
- ↑ "Rubitherm GmbH".
- ↑ "Climator - Home".
- ↑ "Mitsubishi Chemical Corporation".
- ↑ "CRISTOPIA Energy Systems". Archived from the original on 2001-05-16.
- ↑ "PCM Phase Change Material Materials Manufacturers".
- ↑ "Phase Change Materials - BASF Dispersions & Pigments". Archived from the original on 2008-12-22.
- ↑ "Phase Change Materials: Thermal Management Solutions".
- ↑ "Phase Change Materials (PCM) - Macro-encapsulated PCM manufacturing & supply".
- ↑ "Microencapsulation Technology". Microtek Laboratories.
- 1 2 3 4 5 6 "Product Finder". Croda Phase Change Materials. Croda International Plc.
- ↑ Frederik Tudor the Ice King on ice transport during the 19th century
- ↑ Richard Trevithick's steam locomotive ran in 1804
- ↑ Amédée Bollée created steam cars beginning at 1873
- ↑ Tyagi, Vineet Veer; Buddhi, D. (2007). "PCM thermal storage in buildings: A state of art". Renewable and Sustainable Energy Reviews. 11 (6): 1146–1166. doi:10.1016/j.rser.2005.10.002.
- 1 2 "How two low-cost, made-in-India innovations MiraCradle & Embrace Nest are helping save the lives of newborns". timesofindia-economictimes.
- ↑ "MiraCradle - Neonate Cooler".
- ↑ Omer, A (2008). "Renewable building energy systems and passive human comfort solutions". Renewable and Sustainable Energy Reviews. 12 (6): 1562–1587. doi:10.1016/j.rser.2006.07.010.
Sources
- PHASE CHANGE MATERIAL (PCM) BASED ENERGY STORAGE MATERIALS AND GLOBAL APPLICATION EXAMPLES
Zafer URE M.Sc., C.Eng. MASHRAE HVAC Applications
- Phase Change Material Based Passive Cooling Systems Design Principal and Global Application Examples
Zafer URE M.Sc., C.Eng. MASHRAE Passive Cooling Application
Further reading
- Raoux, S. (2009). "Phase Change Materials". Annual Review of Materials Research. 39: 25–48. Bibcode:2009AnRMS..39...25R. doi:10.1146/annurev-matsci-082908-145405.
- Phase Change Matters (industry blog)