Penex

The Penex Process is a continuous catalytic process used in the refining of crude oil. It isomerizes light straight run naphtha (C5/C6) into higher-octane, branched C5/C6 molecules. It was first used commercially in 1958.[1]

The Penex process uses fixed-bed catalysts containing chlorides.[2] A single pass of feedstock with an octane rating of 50-60 through such a bed typically produces an end product rated at 82-86. If the feedstock is subsequently passed through a DIH (deisohexanizer) column, the end product typically has an octane rating of 87-90.5. If the feedstock is subsequently passed through a Molex-technology column, the end product typically has an octane rating of 88-91. If the feedstock is first passed through a DIP (deisopentanizer) column to remove iso-pentanes, then through the Penex bed, and subsequently through the DIH column, the end product typically has an octane rating of 91-93.

The Penex Process is licensed by the UOP corporation and currently utilized at more than 120 units at petroleum refineries and natural gas liquids plants throughout the world.[3]

  • UOP's Website on C5/C6 Isomerization
  • Snoop

References

  1. ↑ http://www.uop.com/objects/TSPenexProcess.pdf UOP Penex Process website
  2. ↑ Takao, Kimura (2003). "Development of Pt/SO 4 2−/ZrO 2 catalyst for isomerization of light naphtha". Catalysis Today. 81 (1): 57–63. doi:10.1016/s0920-5861(03)00102-0.
  3. ↑ Maples, Robert E. (2000). Petroleum refinery process economics. Penwell Books. p. 455. ISBN 9780878147793. Retrieved 13 April 2015.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.