Mount Barker Junction railway station

Mount Barker Junction
Coordinates 35°01′27″S 138°51′33″E / 35.02417°S 138.85914°E / -35.02417; 138.85914Coordinates: 35°01′27″S 138°51′33″E / 35.02417°S 138.85914°E / -35.02417; 138.85914
Operated by South Australian Railways / SteamRanger
Line(s) Adelaide-Wolseley
Victor Harbor
Distance 50.00 kilometres from Adelaide
Platforms 1
Tracks 3
Construction
Structure type Ground
Other information
Status Closed
History
Opened 1883
Services
Preceding station   TransAdelaide   Following station
toward Adelaide
Adelaide-Wolseley line
toward Wolseley
toward Adelaide
Victor Harbor railway line

Mount Barker Junction railway station is a disused station on the Adelaide to Wolseley line serving the South Australian city of Mount Barker.[1]

History

Mount Barker Junction station opened in 1883, and consisted of a main platform with a timber station building identical to the one at Balhannah, with a tall signal box next to the building. An island platform was built as well. The timber building and signal box were replaced with the current brick building in 1943. The island platform was demolished around the time the station closed to passengers by 1984 when the passenger service to Victor Harbor ceased.

It became a junction station when the Victor Harbor line opened. When the Adelaide-Wolseley line was gauge converted to standard gauge in 1995, the Victor Harbor line was isolated from the rest of the Australian National network. SteamRanger subsequently relocated from Dry Creek to Mount Barker, and runs broad gauge services south on the line from Mount Barker station.[2] Until 2005, SteamRanger ran a Junction Jogger service from Mount Barker station to this location, but ceased probably due to a worn-out track along this section.[3]

References

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.