Mitsubishi Minica

Mitsubishi Minica
Sixth generation Minica
Overview
Manufacturer	Shin Mitsubishi Heavy-Industries (1962–1964) Mitsubishi Motors (1964–present)
Also called	Mitsubishi 360, Towny, Chrysler Minica
Production	1962–2011
Assembly	Mizushima plant, Kurashiki, Okayama, Japan
Body and chassis
Class	Kei car
Related	Mitsubishi Minicab
Chronology
Successor	Mitsubishi eK

The Mitsubishi Minica is a kei car produced by Mitsubishi Motors for the Japanese domestic market from 1962 to 2011. It was first built by Shin Mitsubishi Heavy-Industries, one of Mitsubishi Heavy Industries' three regional automotive companies until they were merged in 1964. In Japan, it was sold at a specific retail chain called Galant Shop. In 2011, the car was replaced with the Mitsubishi eK. The car was also sold as the Chrysler Minica in the Philippines from the fifth to eighth generations.

First generation

Mitsubishi 360

Mitsubishi 360 (commercials)
1968-69 Mitsubishi 360 Light Van
Overview
Production	1961–1969
Body and chassis
Body style	2-door, 2-seater van (LT20) 2-door light van (LT21/23) 2-seat pickup truck (LT22/25)
Layout	Front engine, rear-wheel drive
Powertrain
Engine	ME21/ME24/ME24D/ME24E 359 cc air-cooled two-stroke I2 ME21: 17 PS at 4800 rpm ME24: 18 PS at 4800 rpm ME24D: 21 PS at 5500 rpm ME24E: 26 PS at 5500 rpm
Dimensions
Wheelbase	1,900 mm (74.8 in)
Length	2,995 mm (117.9 in)
Width	1,295 mm (51.0 in)
Height	1,390–1,400 mm (54.7–55.1 in)
Curb weight	480–525 kg (1,058–1,157 lb)

The precursor of the Minica was the Mitsubishi 360, a series of light trucks introduced in April 1961. Designed for the lowest kei car vehicle tax classification, it was powered by an air-cooled 359 cc, 17 PS (13 kW) engine, providing a lowly 80 kilometres per hour (50 mph) top speed but with a fully syncromeshed four-speed transmission. After the successful 1962 introduction of the passenger car version, called Minica, the 360 van and pickup continued alongside the Minica, sharing its development.^[1] The Mitsubishi 360/Minica competed with the established Subaru 360, Daihatsu Fellow Max, and the Suzuki Fronte in the late sixties. The somewhat unexpected success of the 360/Minica led Mitsubishi to end production of three-wheeled vehicles. This generation used the Chrysler Minica nameplate in the Philippines.

Originally available as a panel van or light van (really a Station Wagon, but registered as a commercial vehicle for tax purposes), with a pickup version added in October, the Mitsubishi 360 was rather quaintly styled. Suicide doors and a swage line which continued across the hood were often accented by whitewall tires and lace curtains (both standard on the Light Van DeLuxe, introduced in April 1962) to complete the picture. The 360 and Minica were given a thorough facelift in November 1964, with an entirely new front clip with a pressed metal chrome grill. The more modern look was accompanied by the new, somewhat more powerful ME24 engine, affording a top speed of 85 kilometres per hour (53 mph).^[2]

The four-seat version of the light van (LT21-4) could carry 200 kg (441 lb), while the strict two-seater (LT20) could take a full 200 kg (441 lb).

In August 1966, the Mitsubishi Minicab cab-over pickup truck was launched to complement the Mitsubishi 360 light truck. Powered by the same air-cooled two-stroke 359 cc engine as the Minica, it came with cargo gates on three sides to simplify loading and unloading. In December, the 360 received a less ornate grille. In May 1967, the 360 and Minica were both updated with the new 21 PS ME24D, increasing top speed to 90 km/h (56 mph).^[1] In September 1968 a Super Deluxe version of the light van was added, featuring a new plastic grille and more modern interior. At the same time, the pickup dropped the "360" model name and was from now on sold as the "Minica Pick" (ミニカピック, Minika Pikku). By 1969, the new Minica Van had superseded the LT23 and it was no longer produced, although the LT25 pickup continued to be built until 1971 (at least). These late models have the air-cooled ME24E engine with 26 PS (19 kW), although top speed remained 90 km/h (56 mph). It also has the same blacked-out plastic grille as fitted to the Super Deluxe and late first-generation Minicas.^[3]

Mitsubishi 360 Pickup

1961-64 LT22

1967-69 LT25

rear view of LT25

Minica Sedan

1st generation
1962 Mitsubishi Minica
Overview
Production	1962.10–1969.07
Body and chassis
Body style	2-door sedan
Platform	LA20/21/23
Powertrain
Engine	ME21/ME24/ME24D 359 cc air-cooled two-stroke I2 2G10 359 cc two-stroke I2 ME21: 17 PS at 4,800 rpm ME24: 18 PS at 4,800 rpm ME24D: 21 PS at 5,500 rpm 2G10: 23 PS at 5,500 rpm

The first Minica (LA20) was first introduced in October 1962 as a two-door sedan based on the Mitsubishi 360 light truck, sharing its front-mounted ME21 359 cc twin-cylinder air-cooled engine driving the rear wheels, transverse leaf springs in front and beam axle/leaf springs at the rear.^[4] Top speed was marginally higher at 86 km/h (53 mph). With its tailfins and scalloped rear windshield, the Minica looked even more anachronistic than its van/pickup counterparts. In November 1964 the Minica (and 360) received a fairly thorough facelift and the improved ME24 engine (LA21). Power output was up by one, to 18 PS (13 kW), with the new "Auto Mix" system removing the need for premixing oil and gasoline.^[5]

Rear view of 1965/66 LA21 Minica

LA23 Super DeLuxe, note different grille and twin headrests

In December 1966, along with a slightly different grille and new badging, a basic "Standard" Minica sedan was added, while the regular version was promoted to "Deluxe". Prices were ¥340,000 and ¥368,000 respectively.^[6]

In May 1967, the Minica was given another minor update, with a modified dashboard and a padded center to steering wheel. The engine was also upgraded, with the new reed valve ME24D providing a useful 21 PS.^[7] In September of the following year, a Super Deluxe grade was added, using the new 23 PS (17 kW) water-cooled 2G10 engine developed for the next-generation Minica.^[5] This (the LA23) also featured a full vinyl interior and a new plastic grille (as on the Mitsubishi 360 van pictured above). With the July 1969 introduction of the second-generation Minica, the LA series was discontinued.

Second generation

2nd generation
Mitsubishi Minica 70 (A100)
Overview
Production	Sedan: 1969–1973 Van: 1969-1981 Skipper: 1971-1974
Body and chassis
Body style	3-door sedan 2-door wagon 2-door coupé
Platform	A100/100V・A101/101V・A102・A104V/105V・A106V
Powertrain
Engine	359 cc ME24E/F air-cooled two-stroke I2 (A100/100V) 359 cc 2G10 two-stroke I2[8] (A101/101V) 359 cc 2G21 SOHC I2 (A102) 471 cc 2G22 SOHC I2 (A104V) 546 cc 2G23 SOHC I2 (A105V)
Dimensions
Wheelbase	1,900 mm (74.8 in)
Length	2,995 mm (117.9 in)
Width	1,295 mm (51.0 in)
Height	1,305–1,390 mm (51.4–54.7 in)
Curb weight	445–490 kg (981–1,080 lb)

The second-generation Minica 70 was introduced in July 1969 with coil springs front and rear, a five-link rigid rear axle, and a three-door sedan body featuring the new "Wing-Flow Line" style. The new design was much more appealing to young buyers than the dated and corny looks of earlier Minicas, and the rear hatch was a Kei class first. Two 359 cc 2G10 water-cooled two-stroke powerplants were optionally available (A101), either the Red 28 PS (21 kW) engine (Super Deluxe, Sporty Deluxe) or the Gold engine fitted with twin SU carburetors developing 38 PS (28 kW). The Gold engine, introduced in December 1969, was fitted as standard to the SS and GSS sport models introduced at the same time. The basic Standard and Deluxe versions (A100) were still fitted with the old 26 PS (19 kW) ME24E air-cooled engine Yellow engine, for a top speed of 105 kilometres per hour (65 mph).^[9] The better equipped Hi-Deluxe version also appeared in December 1969. This generation again bore the Chrysler Minica nameplate in the Philippines.

A two-door wagon body was also added in December 1969 and was to remain in production until its eventual replacement by the Minica Econo in 1981. In October 1970 the ME24F Yellow engine gained four horsepower for a total of 30 PS (22 kW) (the Van did not receive this upgrade) while the Red engine went up to 34 PS (25 kW).^[8] The GSS version gained integrated foglights and four round headlight, while the SS was discontinued at the same time. A luxurious GL version was also introduced for 1971, featuring high-back bucket seats in front.

Other bodystyles

1969-1973 Mitsubishi Minica Van (A100V)

Rare LHD Minica Skipper in Okinawa

In February 1971 a very minor facelift meant the car was now called Minica 71. In addition to more aggressive, wider taillights and some trim changes, one could now get the water-cooled 2G10 engine in the lower priced Family Deluxe.^[10]

The Minica Skipper (A101C) was introduced in May 1971 as a two-door coupé with liftable rear window, and a choice of Red or Gold 2G10 engines. The Skipper was available either as the S/L, L/L or GT. This also meant that the GSS sedan was gradually becoming obsolete, as the focus of the sportier Minicas shifted to the coupé versions. Styling wise, the Skipper represented a miniature version of the seminal hardtop Mitsubishi Galant GTO.^[11] To allow for a combination of fastback styling with rearward visibility, a secondary small rear window was placed on the back panel, à la the Maserati Khamsin and Honda CR-X. The top rear window opened for access to the luggage area, which featured a folding rear seat. Besides chassis and internals, the Skipper shared the front clip and lower door panels with the sedan.^[12]

By September 1971, with the introduction of the Minica 72, the sedan versions were no longer available with the powerful Gold engine. Changes were limited to a new honeycomb grille, taillights (incorporating amber turnsignals) and a new dash similar to that of the Skipper.^[13] The Sporty Deluxe version was also discontinued.

In October 1972 the 2nd-generation Minica received its last facelift, becoming the Minica 73 to soldier on for another year as a low-cost alternative to the new F4. Sold either as a Standard or a Deluxe, only the de-tuned 31 PS (2G10-5) Red engine also used in the Van versions was now available, placing the "73" firmly at the bottom of the Minica lineup. There were no more air-cooled Minicas available. One year later, a Van Custom was added, with four headlights and more extensive equipment. In late 1974 or early 1975 the Van was updated to accept new larger license plates that were now required. The Van continued with the two-stroke 2G10-5 engine until being replaced by the bigger-engined Minica 5 Van (A104V) in March 1976.

1973 Minica Skipper IV

Also in October 1972 the renamed Skipper IV (A102) received the new four-stroke 2G21 engine from the Minica F4, with either 32 or 36 PS.^[14] A new F/L replaced the S/L in the lineup. Along with some safety improvements in October 1973 both engines were replaced by the 30 PS (22 kW) "Vulcan S" engine, as the Skipper IV lineup was further narrowed. The coupé continued in production until July (or perhaps December) 1974, but ever more strangled by emissions regulations its market had by then shrunk to almost nothing.

Third generation

3rd generation
1973/74 Minica F4 GL
Overview
Production	1972–1977
Body and chassis
Body style	3-door sedan
Platform	A103A・A104A
Powertrain
Engine	359 cc 2G21 SOHC I2 471 cc 2G22 SOHC I2 546 cc 2G23 SOHC I2
Dimensions
Wheelbase	2,000 mm (78.7 in)
Length	2,995–3,175 mm (117.9–125.0 in)
Width	1,295–1,395 mm (51.0–54.9 in)
Height	1,315 mm (51.8 in)
Curb weight	515–565 kg (1,135–1,246 lb)

The third-generation Minica was introduced as the Minica F4 (A103A) in October 1972 with a 359 cc OHC engine in the same layout, but featuring a liftable clam-shell rear window as on the coupé. The Skipper continued in production, as of October 1973 with the new engine (becoming the Minica Skipper IV). The new four-stroke Vulcan 2G21 MCA engine (Mitsubishi Clean Air) was much cleaner than, but not as smooth running as its two-stroke predecessors. The six single-carb-engined versions provided 32 PS (24 kW) while the twin-carb version listed for the GS and GSL models offered 36 PS (26 kW).^[14] The Van range continued to use the previous body.

In late 1973, facing shrinking Kei-car sales, Mitsubishi narrowed the Minica F4 range down to four equipment levels (Hi-Standard, Deluxe, GL and SL), with the cheaper versions featuring a new grille. The sporty versions were discontinued, as the twin-carb engine fell foul of new emissions regulations. The modified Vulcan S engine came equipped with a balance shaft (later baptised "Silent Shaft") and was cleaner yet, hence the "MCA-II" tag. Power, however, was down to 30 PS. Top speed was 115 km/h (71 mph).^[16] In December 1974, the lineup was again revamped, with the GL and SL becoming the Super Deluxe and Custom.^[17] Mitsubishi also lightly redesigned the Minica to accept the new, bigger license plates now required for Kei cars.

In May 1976 (March for the Minica 5 Van), corresponding to revised kei car regulations of January 1976 (length up to 3.2 m, width to 1.4 m and engine size to 550 cc) both the sedan and the van received a new long-stroke 471 cc engine, a small increase in length (entirely due to new, larger bumpers), and a new name, the Minica 5. Both models were also lightly facelifted, featuring new grilles, while equipment levels remained the same. While power output of the new Vulcan 2G22 did not change for the sedan (A104A), the van (A104V) received a lower powered 28 PS (21 kW) version thereof. The Minica 5 was a mere interim model, anticipating the more thoroughly revised Minica Ami 55 which was soon to arrive.

Fourth generation

Mitsubishi Minica
Minica Ami 55 XL (A105A)
Overview
Production	1977 - 1984
Body and chassis
Layout	FR
Platform	A105A・A106A・A107A/V
Powertrain
Engine	3 cylinder watercooled
Dimensions
Wheelbase	2,050 mm (80.7 in)
Length	3,175 mm (125.0 in)
Width	1,395 mm (54.9 in)
Height	1,315 mm (51.8 in)
Curb weight	565 kg (1,246 lb)

In June 1977 the car and engine grew once again, creating the Minica Ami 55. While the side body panels remained the same, length increased yet a little more (3175 mm) and the entire car was widened by 10 mm (0.4 in). The updated 546 cc Vulcan 2G23 engine provided 31 PS (23 kW) for the A105A. Its sibling, the Minica 55 Van (A105V) was updated in March 1977 and was almost impossible to distinguish from the previous Minica 5 Van, aside from badging and a slightly less plasticky front end. The bigger engine provided some useful additional torque, but the sporting Minicas of the early seventies were now a memory. The traditional (and unusual amongst Kei cars) Panhard layout remained. This generation was marketed by Chrysler as the Chrysler Minica in the Philippines.

Minica Ami 55 XL

September 1978 brought another engine upgrade: The new "Vulcan II" G23B featured the lean burn MCA-Jet emissions control system with a hemispherical head, aluminium rocker arms and three valves per cylinder, but power outputs remained static. The model code became A106, with A106V used for the van which continued to use the bodywork of the second generation.

In September 1981 the car received another redesign. An entire new rear end meant a slightly longer wheelbase (up to 2,050 mm) and a somewhat longer and taller body. The somewhat boxy rear end, still with a clamshell rear window, looked a bit incongruous paired with the original Minica F4 front wings and doors. The new Minica was renamed the Minica Ami L (A107A), but bigger news was that the Minica 55 Van, based on the 1969 A100V, was finally retired. The new A107V Minica Econo ("Econo" hinting at its primary use as a private economy car rather than as a commercial vehicle) looked very similar to the Ami L but featured a proper rear hatch and folding rear seat, allowing it to be registered as a light commercial vehicle like its competitors the Daihatsu Mira, Suzuki Alto and Subaru Rex. Cargo capacity, compared to the more workmanlike Minica 55 Van, was reduced from 300 to 200 kg (441 lb).

A two-speed, semi-automatic gearbox was also available on all models, while the standard four-speed manual received lower gearing for the Econo model. The engine was more quiet than before, featuring a milder cam profile. Power output of the G23B remained the same, although the Econo was stuck with a 29 PS (21 kW) version of the old 2G23 engine. Top speed of the Ami was 110 km/h (68 mph).^[18] In December 1981 a strict two-seater version of the Econo was added. One year later, the Minica was sold with the new "MMC" logo rather than the old "three diamonds". In March 1983 the Minica Ami L Turbo became the first kei car to be offered with a turbocharger, offering 39 PS (29 kW) and glitzy graphics. This proved short-lived, as by January 1984 production of the A107 Minicas had ended, with Mitsubishi preparing for the release of an all new, front-wheel drive Minica.

Fifth generation

5th generation
Overview
Production	1984–1989
Body and chassis
Platform	H11A/V・H12V・H14A/V・H15A/V
Powertrain
Engine	546 cc G23B SOHC I2 548 cc 3G81 SOHC I3 783 cc 2G25 SOHC I2 796 cc 3G82 SOHC I3
Dimensions
Wheelbase	2,260 mm (89.0 in)
Length	3,195 mm (125.8 in)
Width	1,395 mm (54.9 in)
Height	1,430 mm (56.3 in)
Curb weight	580 kg (1,280 lb)

The fifth-generation Minica was introduced in February 1984 as a front engined, front wheel drive vehicle for the first time. It offered three- and five-door configurations, increased size and a torsion beam/coil spring rear suspension. With its "tall-boy" design it was much more spacious inside. It retained the G23B engine, but modernized with a timing belt rather than the old noisy timing chain. The Minica sedan had 33 PS (24 kW), the sparsely trimmed Econo commercial version 31 PS (23 kW), and the Turbo gained an intercooler and now offered 42 PS (31 kW). Air conditioning finally became an option. Reflecting the design improvements, Mitsubishi advertised the car as a worthy competitor for the considerably larger cars of the one-litre class.^[19] A considerable improvement on the old model, sales of the passenger model tripled year-on-year in its first month on the market. Sales of the Econo doubled.^[19]

Mitsubishi Minca Econo Turbo ZEO (H14V)

In September 1985 a four-wheel drive model with a live rear axle was introduced. In January 1988, as the bubble economy and the kei-class horsepower war were both heating up, an aero-kit version of the Turbo was introduced to compete with Suzuki's Alto Works and Daihatsu's Mira Turbo TR-XX. Called the Turbo ZEO it was equipped with the same 50 PS (37 kW) carburetted engine as the regular Turbo model; sales were low. There was also a low-priced, well-equipped version of the Minica Econo called the Tico, as well as a new top-of-the-line five-door sedan called the Minica Exceed.

This generation was the first to reach export markets, usually labelled Mitsubishi Towny, originally with a two-cylinder 783 cc engine and a four-speed manual transmission. Later (1987) it received a three-cylinder 796 cc engine with 45 PS (33 kW) and a five-speed gearbox (also locally manufactured by CMC motors in Taiwan, only as a five-door); a three-door panel van was also marketed abroad. Chrysler marketed the Minica as the Chrysler Minica in the Philippines.

Sixth generation

6th generation
1989 Minica Piace 4WD
Overview
Also called	Mitsubishi Towny, Chrysler Minica
Production	1989–1993
Powertrain
Engine	548 cc 3G81 I3 548 cc 3G81T turbo I3 657 cc 3G83 I3 657 cc 3G83T turbo I3 796 cc 3G82 SOHC I3
Dimensions
Wheelbase	2,260 mm (89.0 in)
Length	3,195 mm (125.8 in) (1989-1990 Minica) 3,255 mm (128.1 in) (Minica Toppo) 3,195 mm (125.8 in) (1990-1993 Minica)
Width	1,395 mm (54.9 in)
Height	1,420–1,515 mm (55.9–59.6 in)
Curb weight	580–720 kg (1,280–1,590 lb)

In January 1989 the sixth-generation Minica was officially introduced, although the engine, wheelbase, and suspension remained unchanged. In addition to the three-door vans (hatchbacks presumably intended for commercial use) and five-door "sedans" (hatchbacks for private use), a variant with a single door on the right side, two doors on the passenger side, and a liftgate was introduced, named the Minica Lettuce. This was originally a van with a foldable rear seat and flat loading floor, to meet special tax breaks available, but in May 1989 the tax benefits were lowered and the Lettuce became a sedan. A three-door passenger version was introduced at the same time. The asymmetric Minica Lettuce was developed together with the Seiyu supermarket chain, which also sold the car directly. It was meant specifically to simplify the loading of children and shopping.^[20]

1989 Mitsubishi Minica Dangan ZZ (van)

An advanced new turbo engine with double overhead cams and the world's first mass-produced five-valve-per-cylinder engine was introduced for the Dangan ZZ model, producing 64 PS (47 kW).^[21][22] The Dangan was originally a commercial vehicle, but became a passenger car in August 1989. It was later made available in naturally aspirated form as well, as the Dangan Si and Dangan Ri. In May 1991 an automatic option was added to the Dangan ZZ.

The Kei car standards were altered for 1990, allowing for a 10 cm (3.9 in) increase in length and an increase in displacement to 660 cc. The Minica's engine was now 657 cc, while the front bumper gained 3 cm (1.2 in) and the rear bodywork was altered to grow by 7 cm (2.8 in). The wheelbase remained unchanged, while a black plastic element was added behind the rear windows to fill the extra space. A tall three-door MPV model with optional four-wheel drive, the Minica Toppo, was also introduced in February 1990 - the Toppo, being developed before the new regulations were finalized, did not take full advantage of them and ended up 4 cm (1.6 in) shorter than other kei cars. The Dangan Turbo only received its increase in displacement and increase in length in August 1990, six months after the rest of the range had been updated.

Mitsubishi Minica Toppo

In January 1992 the range received a light facelift, along with some new models. New were the Piace and Milano sedans, celebrating the thirtieth anniversary of the Minica, and the Dangan ZZ-Limited which has standard ABS brakes. In January 1993, shortly before the line was replaced, the Milano Limited and Milano four-wheel-drive were added.

Export versions were still usually carrying the "Towny" label and featured an 800 cc 41 PS (30 kW) engine. In the Philippines, it was still sold as a "Chrysler Minica."

Seventh generation

Mitsubishi Minica
Overview
Production	1993 - 1998
Layout	FF/optional 4WD
Powertrain
Engine	3G83 series 3 cylinder SOHC 4A30 series 4 cylinder SOHC16 valve 4A30 series 4 cylinder DOHC20 valve intercooled turbo
Transmission	4MT/5MT/3AT/4AT
Dimensions
Wheelbase	2,280 mm (89.8 in)
Length	3,295 mm (129.7 in)
Width	1,395 mm (54.9 in)
Height	1,475–1,505 mm (58.1–59.3 in)
Curb weight	590–780 kg (1,300–1,720 lb)

In September, 1993, the seventh-generation three- and five-door Minica and Minica Toppo were introduced, with longer wheelbase. The five-valve-per-cylinder three-cylinder engines were replaced with a pair of 659 cc four-cylinder engines; one normally aspirated with single overhead cam and four valves per cylinder, and one turbocharged with double overhead cam and five valves per cylinder. A version of the Toppo with two doors on the passenger side, similar to the "Lettuce", was made available, along with a limited edition RV version. In January, 1997 versions of the Minica and Toppo with retro-styled front ends were introduced as the "Town Bee" model, and exported to Taiwan as the "Towny". The Chrysler Minica was exported to the Philippines restyled again.

Mitsubishi Minica Town Bee

Eighth generation

H42/H47
Overview
Production	1998 - 2007 (passenger models) 1998 - 2011 (commercial models)
Layout	FF/optional 4WD
Powertrain
Engine	657 cc 3G83 I3
Transmission	4MT/5MT/3AT/4AT
Dimensions
Wheelbase	2,340 mm (92.1 in)
Length	3,395 mm (133.7 in)
Width	1,395 mm (54.9 in)
Height	1,475–1,510 mm (58.1–59.4 in)
Curb weight	680–790 kg (1,500–1,740 lb)

The enlarged eighth-generation Minica was introduced in October, 1998 to take advantage of the new regulations, as a pair of three-door and five-door sedans with torsion beam rear suspension and optional four-wheel drive, with the only available engine the 657 cc three-cylinder single overhead cam unit, now equipped with four valves per cylinder. This version is at the maximum exterior dimensions and engine displacement limits as defined in Japanese government regulations for cars classified as kei cars. A five-door MPV built on this platform but with a four-cylinder double overhead cam five-valve-per-cylinder turbocharged engine, known as the "Mitsubishi Toppo BJ" was also introduced. Front-wheel-drive models carry the H42 chassis code, four-wheel-drives are H47. This is followed by an "A" for passenger models and a "V" for commercials.

In January, 1999 the retrostyled Town Bee version of this generation of Minica and the "Mitsubishi Toppo BJ Wide" were introduced. In October, 1999 a 659 cc four-cylinder single overhead cam four-valve-per-cylinder turbocharged engine was introduced, and in December, 1999 a limited edition of 50 "Mitsubishi Pistachios" with a 1094 cc double overhead cam four-valve-per-cylinder direct-injection engine was made available only to organizations working to protect the environment. In October, 2001 a five-door wagon version of the Minica was introduced as the Mitsubishi eK Wagon, and now serves as Mitsubishi's primary product in the "kei" class. Passenger versions were discontinued in 2007, while the models intended for commercial use continued to be built until 2007.

Production of the Chrysler Minica ceased when the Minica was discontinued and its successor does not carry the Chrysler Minica nameplate to this day. Although this was the last generation to carry the Chrysler Minica name.

The Mitsubishi eK is a kei-car which is the successor of the Minica.

In popular culture

• The Dangan ZZ-4 appears alongside several of its kei sports car contemporaries in Kat's Run: Zen-Nippon K Car Senshuken for the Super Famicom.

Notes

References

• GAZOO.com Mitsubishi Minica（first generation）
• GAZOO.com Mitsubishi Minica（second generation）
• GAZOO.com Mitsubishi Minica（third generation）
• GAZOO.com Mitsubishi Minica（fourth generation）
• GAZOO.com Mitsubishi Minica（fifth generation）
• GAZOO.com Mitsubishi Minica（sixth generation）
• GAZOO.com Mitsubishi Minica（seventh generation）
• GAZOO.com Mitsubishi Minica（eighth generation）
• 360cc Light Commercial Truck 1950-1975 (360cc 軽商用貨物自動車 1950-1975). Tokyo: Yaesu Publishing. 2009. pp. 83–87. ISBN 978-4-86144-139-4.
• 360cc: Nippon Kei Car Memorial 1950-1975 (360cc 軽自動車 Memorial 1950-1975). Tokyo: Yaesu Publishing. 2007. ISBN 4861440831.
• Car Graphic: Car Archives Vol. 1, '60s Japanese and American Cars. Nigensha: 2006, p. 21, ISBN 978-4-544-09171-7
• Car Graphic: Car Archives Vol. 5, '70s Japanese Cars. Nigensha: 2007, p. 69-73, ISBN 978-4-544-09175-5
• Car Graphic: Car Archives Vol. 11, '80s Japanese Cars. Nigensha: 2007, p. 203-206, ISBN 978-4-544-91018-6
• "Кιηοκο（三菱360 諸元）". WEB Kinoko. Archived from the original on 2010-01-13.
• Le Salon de l'Auto 1973: les bancs d'essai d l'Auto-Journal. Robert Hersant, Paris: 1973, p. 207.
• Ozeki, Kazuo (2007). Memories of Japanese K-cars 1951 ~ 1975. Tokyo: Miki Press. ISBN 978-4-89522-501-4.
• World Cars 1972. Automobile Club of Italy/Herald Books, NY: 1972. p. 362-363, ISBN 0-910714-04-5
• World Cars 1982. Automobile Club of Italy: 1982. p. 374, ISBN 0-910714-14-2
• This entry incorporates information from the equivalent entry in the Japanese Wikipedia at 9 January 2010.
• This entry incorporates information from the Mitsubishi 360 entry in the Japanese Wikipedia at 9 January 2010.

External links

Wikimedia Commons has media related to Mitsubishi Minica.

• Mitsubishi Minica
• History of Mitsubishi Kei Jidosha