Marshall JTM45

Marshall JTM45 MK II Reissue

The Marshall JTM45 is the first guitar amplifier made by Marshall. First produced in 1963, it has been called a "seminal" amplifier,[1] and is praised as the most desirable of all the company's amplifiers.[2]

History

The JTM45 was first built in 1963, handmade in an all-aluminum chassis, by Ken Bran; Dudley Craven and Ken Underwood. [3] Its first ever use in a live performance was in September 1963 when the first amp was tested at the Ealing Club, not far from the original Marshall shops. Bran & Craven and Underwood were in attendance. Because of its power, Marshall decided early on to build it as a head, with a separate 4×12" cabinet with Celestion speakers. The amplifier itself was based on the Fender Bassman. It uses 6V6 valves, then the EL34 (though early versions had used US 5881, a version of the 6L6[4]) in the output stage, and ECC83 (12AX7) valves in the pre-amplification stage.[2]. Dudley was responsible for the changes from the Fender to what is now known as the JTM45.

Significant differences between the Bassman and the JTM include the all-aluminum chassis, a 12AX7 valve as the first in the chain (the Bassman has a 12AY7), the Celestion speakers with a closed cabinet (compared to open-backed Jensen speakers), and a modified negative feedback circuit which affects the harmonics produced by the amplifier. As Ken Bran later said, "The JTM also had different harmonic content, and this was due to the large amount of feedback that Dudley Craven had given it."[5] The amp was also available as a bass (which lacked a "bright" capacitor) and a PA version (which lacked a "mixer" capacitor).[5]

By the mid 1960s, the JTM45 had become so popular that it began to supplant the ubiquitous Vox amps, even their AC50, though it was just as powerful.[6]

In late 1965, Marshall introduced its now standard script lettering, in white, and by early 1966 it began calling the amplifiers "JTM 50".[5] Some 100 early models had red lettering; these are especially collectible.[2] Other cosmetic changes included a gradual change to different knobs. The JTM 45 became the basis for many subsequent Marshalls, most notably the Marshall 1962 combo (later referred to as the "Bluesbreaker" due to its use by Eric Clapton with John Mayall's Bluesbreakers).[7] It ceased being produced in 1966, but was reissued in 1989, though with a modern printed circuit board and 6L6 output valves.[5] In 2014 Marshall reissued a "handwired" 30 W amplifier based on the JTM45, the 2245THW, whose circuitry is identical to the 1962 combo circuit; it is a "fine high-end piece" according to Vintage Guitar, listed at $4,800.[8]

Name, numbering

The first JTM45s did not have the standard Marshall number that later amps had; models that derived from the JTM 45 did not receive numbers until 1965.[5]

Model numberWattsDatesFeaturesNotes
JTM4535–45[9]1963–19642 channels, 4 inputsAlso available in bass and PA versions
1963501965–19664 channels, 8 inputsPA version; "JTM50 MK III"
1985451965–19662 channels, 4 inputsPA version of JTM50 MK II
1986451965–1966High treble and normal channelsBass version of JTM50 MK II
1987451965–1966High treble and normal channelsLead version of JTM50 MK II; also with tremolo as Model T1987
1989451965–1966For electronic organsAlso with tremolo as Model T1989
JTM 45 (2245[10])301989–2 channels, 4 inputsReissue of original JTM45 (1987)
2245THW[8]302014–Handwired head, circuitry identical with Bluesbreaker

Sound

For all of its differences when compared with the Bassman, the sound of the JTM45 is still described as "like a tweed Fender"; it has more sag and less crunch than the later Marshalls, and is favoured for blues and rock rather than for hard rock and metal.[11] The JTM 45 delivers a smooth Marshall "crunch" with a warm bass response due to the EL34/KT66 valves.

Notable users

References

http://www.dudleycraven.com/ 2018.

  1. Hunter, Dave (2005). Guitar Rigs: Classic Guitar & Amp Combinations. Hal Leonard. p. Back cover. ISBN 978-0-87930-851-3.
  2. 1 2 3 Pittman, Aspen (2003). The Tube Amp Book. Hal Leonard. pp. 66, 68–69. ISBN 978-0-87930-767-7.
  3. Dudley Craven
  4. Hunter, Dave (2005). Guitar Rigs: Classic Guitar & Amp Combinations. Hal Leonard. p. 111. ISBN 978-0-87930-851-3.
  5. 1 2 3 4 5 Doyle, Michael (1993). "The JTM Series 1962–1966". The History of Marshall: The Illustrated Story of "The Sound of Rock". Hal Leonard. pp. 17–22. ISBN 978-0-7935-2509-6.
  6. Hunter, Dave (2005). Guitar Rigs: Classic Guitar & Amp Combinations. Hal Leonard. p. 102. ISBN 978-0-87930-851-3.
  7. Batey, Rick (2003). American Blues Guitar: An Illustrated History. Hal Leonard. p. 106. ISBN 978-0-634-02759-8.
  8. 1 2 Childs, Zac (October 2014). "Bluesbreaker Redux: Marshall Handwired Series 2245THW head and 1960AHW Cabinet". Vintage Guitar. p. 130.
  9. Micheal, Doyle; Nick, Bowcott. The History of Marshall – The First Fifty Years. pp. 44, 48.
  10. "Marshall Amps:: 2245 (JTM45)". Marshall Amplification. Retrieved 1 May 2013.
  11. Hunter, Dave (2005). The Guitar Amp Handbook: Understanding Tube Amplifiers and Getting Great Sounds. Hal Leonard. pp. 75–76. ISBN 978-0-87930-863-6.
  12. Prown, Pete; Lisa Sharken (2003). Gear Secrets of the Guitar Legends: How to Sound Like Your Favorite Players. Hal Leonard. p. 2. ISBN 978-0-87930-751-6.
  13. Newquist, H. P.; Rich Maloof (2004). The hard rock masters. Hal Leonard. pp. 23–24. ISBN 978-0-87930-813-1.
  14. Prown, Pete; Lisa Sharken (2003). Gear Secrets of the Guitar Legends: How to Sound Like Your Favorite Players. Hal Leonard. p. 10. ISBN 978-0-87930-751-6.
http://www.dudleycraven.com/ 
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.