John Morris and Sons Salford

John Morris and Sons Limited of Cross Lane, Salford, Manchester, Lancashire were manufacturers of all kinds of fire fighting equipment from fire engines, manual then motorised, fire retardant foams, electrical fire alarms etc. right down to firemen's axes and fire buckets.

John Morris & Sons Limited is now a dormant subsidiary of Schneider Electric Limited, manufacturers of industrial safety systems.

History

The business was founded in Salford by John Morris by 1877. After he retired in 1905 his three sons, John, James and Fred, incorporated a limited liability company, John Morris and Sons Limited. This company continues in existence but it is dormant, part of its former business is continued by a division of Schneider Electric industrial safety systems.

Inventions

Auxiliary Fireman Bernard Hailstone attaches a hose to a fire hydrant, somewhere in London, c 1940 - D2651

Morris instantaneous coupling

John Morris senior invented and patented his Morris instantaneous coupling for fire hoses in 1876. (1876: Hose-Coupling, No.175,232). Not only was coupling instantaneous but the water flow was much less restricted. It became a British Standard coupling BS 336 at the time of the Second World War and is now known as British Instantaneous.[1]

Firesnow

Albert Square 1910

John Morris (Firesnow) Limited was incorporated in May 1921 to take over the business of fire engineer previously carried on under the name James Morris in Albert Square, Manchester[2]

Managing director, John Morris junior, invented a compound in a froth-forming liquid charged with carbonic acid gas which if sprayed on a fire prevents combustion by excluding oxygen.

It was demonstrated to interested parties in May 1920.[3] In 1952 a new Firesnow factory was built in Stockport Cheshire.

John Morris (Firesnow) Limited 00174760 was liquidated in 1971 and dissolved[4]

Products

Ajax escape ladder, Chester
Morris-Magirus turntable fire escape, Australia

At Salford Fire Engine Works, Manchester 5, John Morris and Sons manufactured:

Fire engines—pump escapes— (until 1921?)
Morris-Magirus turntable escapes (until the second world war) mounted on other brand heavy commercial vehicles
Morris own-design turntable escapes mounted on other brand heavy commercial vehicles (at least into the 1950s)
Wheeled escapes
Trailer pumps, hose reel carts
Ajax extension ladders, portable extension ladders, belt and rope fire escapes, rope ladder fire escapes
Union canvas fire hose, nozzles sprayheads and valves
Acme flax fire hose
Morris hose couplings, hydrants, adaptors and connectors, standpipes, branchpipes,
Fireman's axes, fire extinguishers, fire buckets

Fire engines

1912 pump escape with Belsize 14.7 litre engine—Southampton Fire Brigade
1914 fire engine—Indian Railways

A long established maker of horse-drawn fire-engines John Morris and Sons came a little late to the manufacturer of motor vehicles.[5]

John Morris and Sons' first motor driven "first-aid motor fire engine" was built in 1905 for Capetown's Metropolitan Fire Service.[6] It was fitted with a 30-40 h.p. Belsize engine and provided accommodation for six firemen.[7]

The first motor-driven fire-pump built by John Morris and Sons was for the Bury Town Council. It was built in 1909 after Morris and Son had already turned out from its works a large number of motor-driven first-aid engines, tenders, and fire-escapes.[8]

Their Ajax petrol-propelled motor pump was fitted with a 70 b.h.p. engine, and this drives. a special form of turbine pump which, it is claimed by the makers, has advantages over similar existing apparatus of other makes, as well as over various types of reciprocating pump which are also being offered. The pump was extremely compact leaving room for considerable first-aid plant including a 50 ft. sliding-carriage escape, a 30-gallon chemical tank complete with reel and hose and stowage capacity for 2,000 ft. of hose and all the other standard equipment suitable for such a turnout. The capacity of the standard pump offered by this maker is rated at 350 gallons per minute although an alternative 450-gallon pattern is also available.[9]

Home market

Manchester Corporation acquired its first self-propelled units in 1911 including a John Morris motor pump of 500-gallon capacity. The John Morris pump had a Belsize engine as power unit. In 1913 were added two further John Morris 400-500-gallon motor pumps and a John Morris motor hose carriage. In the following year four more John Morris motor pumps of similar capacity strengthened the fleet, and then came a hiatus, caused by the war, until 1917, when a 3-ton Belsize chassis was equipped by Messrs. John Morris and Son with a 350-gallon pump. In 1919, difficulty was experienced in obtaining delivery of standard motor pumps. The next purchase was in 1919, when another John Morris four-cylinder 500-gallon motor pump was put in service, followed by a similar unit in the next year. These machines were equipped with a long-stroke engine, which enabled the pumpiiig capacity to be increased to 500-600 gallons of water per minute. (The fourth pump purchased in 1914 also had this long-stroke engine.)[10]

Postwar

1948 Leyand Beaver

In 1952 John Morris and Sons offered a 100 foot turntable pump escape on a Leyland Beaver haulage-type chassis. It incorporated a device providing automatic compensation for road camber and gradient and an automatic cut-out when the escape reaches the safety limit of extension at a given angle of elevation. The hydraulic escape ladder reaches full height in 18-20 seconds. In an emergency, movement of the ladder can be carried out manually. There is a two-way loudspeaker telephone. The Coventry-Climax pump had a capacity of 350-500 g.p.m. The usual compartment behind the driver's cab seats a crew of four and at the sides and rear of the platform are lockers for storing hose, monitor branches, unions, tools and other equipment. The escape stops instantly if the ladder meets any obstruction while it is being moved.[11]

Siebe Gorman

Siebe Gorman, manufacturers of diving and breathing apparatus bought John Morris and Sons for cash in January 1970.[12] Siebe Gorman merged with BTR in 1999 to form Invensys which became part of Schneider Electric in 2013.

References

  1. ↑ Wheels of Industry, Commercial Motor, page 30, 27 December 1927
  2. ↑ Commercial Notes and News, Engineering World, page 23, 4 June 1921
  3. ↑ Fire-snow. Commerce and Finance No. 3, page 813, June 9, 1920
  4. ↑ page 13798 ,The London Gazette, 17 December 1970
  5. ↑ Fire-Brigade Matters. Commercial Motor, page 13, 16 December 1909
  6. ↑ Fire Engine. Page's Engineering Weekly, page 374, 16 February 1906
  7. ↑ Here and There. The Motor-Car Journal, page 1088, 17 February 1906
  8. ↑ News and comment. Commercial Motor 8 April 1909
  9. ↑ Fire-Brigade Matters. Commercial Motor, page 13, 16 December 1909
  10. ↑ How Manchester meets fire menace. Commercial Motor, Page 48, 14 June 1927
  11. ↑ Safety Devices in New 100-ft Fire Escape. Commercial Motor, Page 50, 25 January 1952
  12. ↑ Bids, Deals & Mergers. The Times, Saturday, Jan 31, 1970; pg. 18; Issue 57782
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.