Hyundai Alpha engine

α-series
Hyundai Alpha-series
Overview
Manufacturer Hyundai Motors
Designer Dr. Hyun-Soon Lee
Also called Alpha
Layout
Cylinder block alloy Cast Iron
Cylinder head alloy Aluminum alloy
Combustion
Fuel type Petrol
(Gasoline
Oil system Wet sump
Cooling system Liquid-cooled
Chronology
Predecessor Mitsubishi Orion engine
Successor Gamma

The Hyundai α-series(alpha-series) engine is a multi-valve, four cylinder engines comprises 1.3 and 1.5L naturally aspirated units and a 1.5L turbocharged version. Modern features are incorporated in the engines in order to provide higher performance and good fuel economy with excellent durability at reasonable cost.[1]

The first α-series engine marketed was the α-1.5D (Engine code:G4EK), it was a modern single overhead camshaft (SOHC), twelve (12) valve, inline-four, petrol-based and naturally aspirated version.

An α-series inline-four, dual overhead camshaft (DOHC), four valve per cylinder version later developed from the α-1.5D.[2]

The α-series engine debuted in the 1992 Hyundai Scoupe Asia Korea and Europe market and later used in other Hyundai models.[3]

The α-series engine were initially produced in 1.3 L and 1.5 L, with only the 1.5 L offered in North America. A strengthened block, an eight-counterweight crankshaft, and hydraulic engine mounts were added in 2000 to reduce NVH (noise, vibration, and harshness).

A 1.6 L version was introduced in 2001 and initially sold alongside earlier versions. The 1.3 L and 1.5 L were later dropped. The 1.6 L engine was further revised in 2005 with a 1.4 L version also available for certain markets. Known as the Alpha II it debuted in the Kia Rio JB. Notable features included a DOHC 16-valve cylinder head, graphite-coated pistons, a strengthened cylinder block, ribbed aluminum oil pan, coil-on-plug ignition, an enlarged throttle body (increased from 48 mm to 52 mm), a revised PCM (powertrain control module), simplified and shortened intake ducting, a revised intake manifold, and a returnless fuel system. These improvements further reduced NVH and emissions, with the 1.6 L version becoming ULEV-certified in all 50 U.S. states.

In 2011 the Alpha engine was replaced with the Hyundai Gamma engine.

1.3

G4EH in a 1999 Hyundai Accent L

The G4EA/G4EH is a SOHC 12-valve 1.3 L (1341 cc) engine, with a bore and stroke of 71.5 mm and 83.5 mm, respectively. Output was 71 hp (53 kW) at 5500 rpm and 81 lb·ft (110 N·m) at 3000 rpm for the carbureted G4EA and 83 hp (62 kW) at 5500 rpm and 86 lb·ft (117 N·m) at 3000 rpm for the G4EH with electronic fuel injection. The 1.3 L engine wasn't available in North America.

α-1.5D 12vG4EK

α-1.5D 12v
Engine Code: G4EK
Overview
Manufacturer Hyundai Motor Company
Also called G4EK
Layout
Configuration In-line four
Displacement 1,495 cc (91.2 in3)
Cylinder bore 75.50 mm (2.972 in)
Piston stroke 83.50 mm (3.287 in)
Valvetrain Single Overhead Camshaft (SOHC) 12 valve
Compression ratio 10:1
RPM range
Idle 800± 100 RPM
Combustion
Fuel system Fuel Injection
Sequential Fuel Injection
Output
Power output 65.00 kW (87.17 hp)
N/A Europe

68.50 kW (91.86 hp)
N/A North America

75.00 kW (100.58 hp)
N/A Asia Korea Domestic
Torque output 132.00 N⋅m (97.36 lbf⋅ft)
N/A Europe
North America

142.00 N⋅m (104.73 lbf⋅ft)
N/A Asia Korea Domestic
Chronology
Predecessor Mitsubishi Orion 4G15 12v

The α-1.5D 12v (G4EK) is an in-line four, single overhead camshaft (SOHC), 12 valves (3-valves/cylinder); spark-ignition 4-stroke engine. An α-1.5D-equipped vehicle's power output varies from the market it was sold.

The naturally aspirated engine's advertised power and torque per market is listed below:

Europe Market:
65 kW (87 hp/ 88 PS) DIN with 132 Nm (97 lb-ft) of torque

North America market:
68.5 kW / 92 hp / 93 PS SAE net and 132 Nm (97 lb-ft) of torque.

Asia Korea Domestic Market:
75 kW (101 hp/ 102 PS JIS net and 142 Nm (105 lb-ft) of torque.

The Hyundai α-1.5D 12v (G4EK) was equipped on the following vehicles listed below:

1992-1996 Hyundai S-Coupe phase-II coupe
(Asia Korea DM, Europe and North America Market)

1994-997 Hyundai Accent (X3 series) 1st-gen. phase-I sedan and hatchback
(Europe Germany Market)

1997-1999 Hyundai Accent (X3 series) 1st-gen. phase-II sedan and hatchback
(North America Market)

α-1.5D 12v TurboG4EK Turbo

α-1.5D 12v Turbo
Engine Code: G4EK Turbo
Overview
Manufacturer Hyundai Motor Company
Also called G4EK Turbo
Layout
Configuration In-line four
Displacement 1,495 cc (91.2 in3)
Cylinder bore 75.50 mm (2.972 in)
Piston stroke 83.50 mm (3.287 in)
Valvetrain Single Overhead Camshaft (SOHC) 12 valve
Compression ratio researching
RPM range
Idle researching
Combustion
Turbocharger Garrett T15 turbo
Fuel system Fuel Injection
Sequential Fuel Injection
Management researching
Output
Power output 84.50 kW (113.32 hp)
T/C Europe
86.00 kW (115.33 hp)
T/C North America
95.00 kW (127.40 hp)
T/C Asia Korea Domestic
Torque output 171.00 N⋅m (126.12 lbf⋅ft)
T/C Europe
167.00 N⋅m (123.17 lbf⋅ft)
T/C North America
180.00 N⋅m (132.76 lbf⋅ft)
T/C Asia Korea Domestic
Emissions
Emissions control technology researching

α-1.5D 16vG4FK

Hyundai Alpha-II series G4FK

The Hyundai Alpha-II G4FK is a modified upgraded version of the 1.5i Alpha-I G4EK SOHC engine. The new 1495cc G4FK is now an in-line 4, spark-ignition 4-stroke, dual overhead camshaft (DOHC) with 16 valves. Thus increasing the Alpha-II G4FK DOHC engine's new advertised power to 75 kW / 101 hp / 102 PS (ECE) and 136 Nm / 100 lb-ft of torque from 1995-1997. In 1998, Hyundai Avante GLS sedan and touring models were equipped with a more powerful Alpha-II G4FK DOHC variant with an advertised power further increased to 79 kW/ 106 hp / 107 PS (JIS net) and 137 Nm / 101 lb-ft of torque.

SPECIFICATIONS:

Total Displacement: 1495 cm3 / 91.2 cui

Bore: 75.50 mm (2.97 in)

Stroke: 83.50 mm (3.29 in)

The Alpha-II G4FK engine was equipped on the vehicles listed below:

1995-1998 Hyundai Avante 1st-gen. phase-I Sedan (Asia Korea DM)

1996-1998 Hyundai Avante 1st-gen. phase-I Touring (Asia Korea DM)

1999-2003 Accent (LC series) 2nd-gen. phase-I Hatchback (North American Market)

α-1.6DG4ED

α-1.5D
G4ED
Overview
Manufacturer Hyundai Motors
Also called G4ED
Production researching
Chronology
Predecessor researching

The Hyundai Alpha-II G4ED is an in-line 4, spark-ignition 4-stroke, dual overhead camshaft (DOHC) with 16 valves. The engine's advertised power is 77 kW / 103 hp / 105PS (ECE) and 143 Nm / 105 lb-ft of torque.

SPECIFICATIONS:

Bore: 76.50mm (3.0118 in)

Stroke: 87.00mm (3.4252 in)

Total displacement: 1599 cc (97.54 cu in)

Compression Ratio: 10

Firing Order: 1-3-4-2

Idle RPM: 750± 100

Ignition Timing at idle speed: BTDC 9° ± 5°/800 rpm

The Alpha-II series G4ED engine was used on the following vehicles listed below:

2000-2003 Elantra 1.6i (XD) 3rd-gen. phase-I sedan and phase-I hatchback

2003-2006 Hyundai Accent (LC series) 2nd-gen. phase-II hatchback (Europe Market)

2003-2006 Hyundai Elantra (XD series) 3rd-gen. phase-II sedan and phase-II hatchback

1.4

The DOHC 1.4 L (1399 cc) G4EE Alpha II debuted in the 2005 European Kia Rio JB, but wasn't available in North America. It utilized the 75.5 mm bore of the original 1.5 L engine, but was destroked to 78.1 mm. Other design improvements of the 1.6 L G4ED carried over to the 1.4 L G4EE, except for CVVT. The engine was noted for its smoother, freer revving nature as compared to the larger 1.6 L due to its squarer bore:stroke dimensions. It also produced slightly improved fuel consumption, but at the expense of overall power output.

Applications

See also

References

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.