Hanriot H.230

Hanriot H.230
H.232
Role Advanced trainer
Manufacturer SNCAC
Designer Hanriot
First flight June 1937
Introduction February 1940
Retired 1945
Primary users French Air Force
Luftwaffe
Finnish Air Force
Produced 1940
Number built 35
Developed from Hanriot H.220

Hanriot H.230 was a French twin-engined advanced trainer. The construction of the aircraft was initiated in 1936 by Hanriot's chief designer Montlaur. The aircraft was produced by the nationalized factory SNCAC.

History

The prototype H.230.01, made its first flight in June 1937. The aircraft resembled its predecessor, the H.220 fighter-bomber, but had a lightened and simplified structure.

The H.230.01 was powered by two 128 kW (172 hp) Salmson 6Af engines and its configuration included a short crew canopy faired into the upper decking of the rear fuselage and a conventional strut-braced tail unit, and the fixed main landing gear units incorporated spatted wheel fairings. During further tests it was decided to introduce considerable dihedral at the wingtips to improve stability, but the H.231.01 which followed in May 1938 had dihedral increased over the whole wing span, and the unusual wingtip arrangement of the modified H.230 was eliminated. Twin fins and rudders were introduced and the power was increased with new 172 kW (230 hp) Salmson 6Af-02 engines. The Hanriot H.232.01 had a single fin and rudder and was equipped with twin 164 kW (220 hp) Renault 6Q-02/03, (left and right hand propeller rotation), engines plus retractable landing gear. The H.232.02, which made its maiden flight in August 1938, introduced a redesigned cockpit. The aircraft was tested between October 1938 and May 1939. The type was then given a twin fin and rudder tail assembly and was flown in this new configuration in December 1939, then redesignated H.232/2.01.

The French Air Ministry made an initial order of 40 H.232.2's. This order was though soon was extended to 57. The French Air Force started to receive their H-232.2's in February, 1940, and received a total of 35 before the defeat against the Germans in June 1940. The Germans captured 22 aircraft of this type, and since they did not have any use of them, Finland placed an order for three aircraft from the Germans.[1] One was destroyed in an accident during the ferry flight to Finland, the other two saw service as advanced trainers in the Finnish Air Force[1] and were written off on January 2, 1950. During the Winter War the French had planned to send 25 aircraft of this type to Finland. The German aircraft were scrapped in 1942.

Variants

H.230
Twin-engined trainer derived from the Hanriot H.220, powered by 2x 128 kW (172 hp) Salmson 6Af engines, one built.
H.231
Further development, powered by two 2x 172 kW (230 hp) Salmson 6Af-02 engines, two built.
H.232
Production prototype with single fin and rudder replacing earlier twin fins, powered by two Renault 6Q-02/03 engines.
H.232/2
Production aircraft, 57 ordered but only 35 delivered before the fall of France in 1940. Three delivered to Finland (one written off on the delivery flight).

Operators

 Finland
 France
 Germany

Specifications (Hanriot H.232.2)

Hanriot 232 3-view drawing from L'Aerophile September 1938

Data from {Aviafrance}[2]

General characteristics

  • Crew: 2
  • Length: 8.55 m (28 ft 1 in)
  • Wingspan: 12.76 m (41 ft 10 in)
  • Height: 3.47 m (11 ft 5 in)
  • Wing area: 21.20 m² (228 ft²)
  • Max. takeoff weight: 2187 kg (4,820 lb)
  • Powerplant: 2 × Renault 6Q-02/03 piston engine, 165 kW (220 hp) each

Performance

See also

Related lists

References

  1. 1 2 Perttula, Pentti. "Backwoods Landing Strip: Finnish Air Force Aircraft". Retrieved 2009-06-28.
  2. "Aviafrance". Retrieved 2007-01-17.

Bibliography

  • Perttula, Pentti. "Backwoods Landing Strip: Finnish Air Force Aircraft". Retrieved 2009-06-28.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.