Hamburg Finkenwerder Airport

Hamburg Finkenwerder Airport
Flugplatz Hamburg-Finkenwerder
Summary
Airport type Private
Serves Airbus' Hamburg facility
Location Hamburg, Germany
Elevation AMSL 23 ft / 7 m
Coordinates 53°32′09″N 09°50′13″E / 53.53583°N 9.83694°E / 53.53583; 9.83694
Map
XFW
Location of the airport in Hamburg
XFW
XFW (Germany)
Runways
Direction Length Surface
ft m
05/23 10,443 3,183 Concrete/Asphalt

Hamburg Finkenwerder Airport (IATA: XFW, ICAO: EDHI) is a private airport in the Finkenwerder quarter of southwest Hamburg, Germany. It is an integral part of the Hamburg Finkenwerder plant of Airbus and is exclusively used by them for corporate, freight, test and delivery flights, including the Airbus A380.

History

The Finkenwerder aircraft works and associated airfield were established in 1939 by the aircraft arm of manufacturer Blohm & Voss. They were substantially undamaged during World War II and when the company, revived as HFB, re-established itself there about 15 years later, the facilities began a long series of progressive expansions and modernizations.[1] In 1964 both the HFB 320 Hansa Jet and the third prototype Transall C-160 made their first flights from the airport. Through a series of mergers and acquisitions, HFB and its Finkenwerder facility eventually became part of Airbus.

Between April 2006 and July 2007, the runway was extended at the southern end, increasing its length from 2,684 m to 3,183 m, in order to accommodate the planned freight version of the Airbus A380.[2]

Manufacturing

An Airbus A321 on final assembly at Hamburg Finkenwerder

The Airbus site at Finkenwerder is the main operations centre for Airbus Operations GmbH and employs around 15,000 people. The Hamburg factory manufactures and equips the forward and rear fuselage sections of the A330 and A350 XWB, as well as carrying out structural assembly and equipment fitting-out of the forward and complete rear fuselage sections for the A380. These sections are then shipped to France on a specially built ferry, for final assembly in Toulouse. Final assembly is carried out for all models of the A320 family, and both the A320 and A380 are fitted with their cabin interiors and painted for final delivery. A large global spares centre is also maintained, holding some 120,000 parts, as well as A320 series maintenance training facilities.

Finished A380s for customers in Europe and the Middle East are returned to Finkenwerder for final acceptance and delivery.[3]

The airport forms an integral part of these manufacturing operations.

Airport flights

There are no public scheduled services at this facility. The airport however handles around 10 to 15 aircraft movements per day. Most are transfer, freight, and test flights for Airbus manufacturing. There is also a twice-daily non-public corporate shuttle service with the Airbus plant in Toulouse.

Incidents and accidents

  • In 1967 the pilot of a Spantax Convair 990 Coronado mistook the 1360 m long runway of Finkenwerder for the 3000 m long runway of Hamburg Airport in Fuhlsbüttel, and only just brought the aircraft to a stop before the end of the runway.

See also

References

  1. ↑ Hermaqnn Pohlmann; Chronik Einews Flugzeugwerkes (Story of an aircraft manufacturer), 2nd Impression, Motorbuch Verlag, 1982.
  2. ↑ ReGe Hamburg Projekt-Realisierungsgesellschaft: Start- und Landebahn an Airbus übergeben Archived 2014-01-16 at the Wayback Machine. In German, 15 January 2014.
  3. ↑ "Airbus in Germany" Archived 2012-01-23 at the Wayback Machine. Airbus, 15 January 2014.

Media related to Hamburg Finkenwerder Airport at Wikimedia Commons

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.