Gough–Joule effect

The Gough–Joule effect (a.k.a. Gow–Joule effect) is originally the tendency of elastomers to contract when heated if they are under tension. Elastomers that are not under tension do not see this effect. The term is also used more generally to refer to the dependence of the temperature of any solid on the mechanical deformation.[1]

If an elastic band is first stretched and then subjected to heating, it will shrink rather than expand. This effect was first observed by John Gough in 1802, and was investigated further by James Joule in the 1850s, when it then became known as the Gough–Joule effect.[2][3]
Examples in Literature:

  • Popular Science magazine, January 1972: "A stretched piece of rubber contracts when heated. In doing so, it exerts a measurable increase in its pull. This surprising property of rubber was first observed by James Prescott Joule about a hundred years ago and is known as the Joule effect."[4]
  • Rubber as an Engineering Material (book), by Khairi Nagdi: "The Joule effect is a phenomenon of practical importance that must be considered by machine designers. The simplest way of demonstrating this effect is to suspend a weight on a rubber band sufficient to elongate it at least 50%. When the stretched rubber band is warmed up by an infrared lamp, it does not elongate because of thermal expansion, as may be expected, but it retracts and lifts the weight."[5]

The effect is important in O-ring seal design, where the seals can be mounted in a peripherally compressed state in hot applications to prolong life.[6] The effect is also relevant to rotary seals which can bind if the seal shrinks due to overheating.

References

  1. Truesdell, Noll (2004). The non-linear theories of mechanics. Springer. p. 360. ISBN 978-3-540-02779-9.
  2. "John Gough and his Observation of Rubber Thermodynamics". Yale University. 1998-10-06. Archived from the original on 2011-06-07. Retrieved 2009-07-19.
  3. Loadman, John (2005). Tears of the Tree: The Story of Rubber -- A Modern Marvel. Oxford University Press. p. 165. ISBN 978-0-19-856840-7.
  4. Kouhoupt, Rudy (January 1972). Heat Runs. Popular Science. Retrieved 2009-07-20.
  5. Nagdi, Khairi (1992). Rubber as an Engineering Material. Hanser Verlag. pp. 33–34. ISBN 978-3-446-16282-2.
  6. Martini, Leonard J. (1984). Practical Seal Design, P.233. CRC. ISBN 978-0824771669.
  • O-ring Gland design notes, PSP Inc.
  • A solar power science project using the Gow-Joule effect
  • "Material Ease: Elastomeric Seals 101 - A Brief Tutorial" (PDF). The AMPTIAC Quarterly, Volume 8, Number 2. Archived from the original (PDF) on 2006-05-19. Retrieved 2011-04-07.
  • "O-Ring Design & Materials Guide: Gough-Joule Effect". R.L. Hudson & Company. Archived from the original on 2011-07-15. Retrieved 2011-04-07.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.