GM Medium Diesel engine

Medium diesel engine
Overview
Manufacturer General Motors
Production 2013 (2013)–present
Layout
Configuration l4
Displacement 1,598 cc (97.5 cu in)
Cylinder bore 79.7 mm (3.14 in)
Piston stroke 80.1 mm (3.15 in)
Cylinder block alloy Aluminium
Cylinder head alloy Aluminium
Valvetrain DOHC
Compression ratio 16:1
Combustion
Fuel system Common rail
Fuel type Diesel
Output
Power output 95 - 160 HP
Torque output 280 - 356 Nm
Chronology
Predecessor Family B/Circle L engine

The Medium Diesel Engine (MDE) is a four-cylinder diesel engine developed by Adam Opel AG and branded "1.6 CDTI Ecotec" in most markets. Opel also adds the marketing term "Whisper Diesel" in some markets, claiming relatively low levels of noise, vibration, and harshness. Production commenced in late 2013 at Szentgotthárd, Hungary. The MDE is Opel's first all-aluminum diesel engine and offers a power density of 85 HP per liter (136 PS) in its most powerful version. Maximum power and torque have been increased versus the previous-generation 1.7-liter engine, while fuel consumption has been reduced by up to 10 percent compared with a 2.0-liter CDTI engine of similar power output.[1] This new 1.6 CDTI engine will replace the current 1.7-liter and lower-powered 2.0-liter diesel engines in a wide range of Opel models, with more- and less-powerful versions to come. The most powerful version of this engine, delivering 136 PS (100 kW; 134 hp) at 3,500–4,000 rpm and 320 N⋅m (236 lbf⋅ft) at 2,000 rpm, was first introduced in the 2013 Opel Zafira Tourer,[2] and later in the 2014 Opel Astra J and restyled 2014 Opel Meriva B. In 2014, versions were released with power outputs of 110 PS and 95 PS.

The engine's displacement is 1,598 cc and it has a bore/stroke ratio of 79.7/80.1 mm, attaining cylinder pressures of 180 bar and a compression ratio of 16:1. It uses an aluminum engine block, die-cast aluminum bedplate, and an aluminum cylinder head. A chain-driven dual overhead camshaft with dual continuous variable cam phasing, employing weight-saving hollow sections and lobes, operates four valves per cylinder with low-friction, hydraulic roller finger followers. The pistons are made from aluminum for reduced reciprocating mass, feature a concave, shallow-bowl profile to facilitate efficient combustion, and are cooled by under-skirt oil spraying. The crankshaft employs four counterweights to minimize mass, and both it and the con-rods are made of forged steel. The engine features multiple improvements to reduce NVH, such as a cam cover made of GRP and fully decoupled from the engine to reduce noise and vibration, while also saving weight compared to aluminum; a composite intake manifold encapsulated in acoustic padding as well as an external plastic shield that both significantly reduce noise emissions; a mechanical crankshaft isolator which reduces radiated noise and torsional vibrations in the accessory drive system; and scissor gears for the timing drive system, incorporating tooth profiles ground with a Low Noise Shifting (LNS) process for optimal noise reduction. More than 150 patented diesel control functions are deployed by the engine's ECU, which was developed in-house by General Motors and jointly engineered in Italy (by GM Powertrain Torino), Germany, and the United States, and will be used in all future GM four-cylinder diesel engines.

Low fuel consumption and Euro 6-standard emissions (effective from September 2015) are also made possible by the use of Opel’s “BlueInjection” selective catalytic reduction (SCR) system, which injects AdBlue, a urea-and-water solution, into the exhaust stream. The solution decomposes into ammonia, which is then stored on a catalyst substrate. When nitrogen oxide (NOx) from the exhaust gases enters the catalyst, it is then selectively reduced to nitrogen and water.

From 2013, this engine replaced the 1.7 L CDTI as well as lower-powered variants of the 2.0 L CDTI Ecotec (110 PS and 130 PS) engines in Opel cars, and in the near future it will also supersede the 1.3 L CDTI engines in the Corsa, Meriva and Astra. GM also plans to introduce the MDE engine in the 2017 Chevrolet Cruze and 2018 Chevrolet Equinox sold in the United States.

A bi-turbo version with 160 HP/356 Nm is used in:

The 136 PS/320 Nm version (code B16DTH) is used in the following vehicles:

The 120 PS/320 Nm version is used in:

The 110 PS/300 Nm version is used in:

The 95 PS/280 Nm version is used in:

See also

References

  1. ↑ "Vauxhall reveals radical new engine strategy". 2013-04-17. Retrieved 2013-04-17.
  2. ↑ "Vauxhall Zafira Tourer 1.6 diesel". 2013-08-31. Retrieved 2013-08-31.
  3. ↑ "New Opel Astra BiTurbo Hatchback: The Spicy One". 2016-05-11. Retrieved 2016-07-30.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.