DRG Class 99.19

DRG Class 99.19
Number(s) 99 191–194
Quantity 4
Manufacturer Maschinenfabrik Esslingen
Year(s) of manufacture 1927
Retired 1967
Wheel arrangement 0-10-0T
Axle arrangement E h2t
Type K 55.9
Track gauge 1,000 mm (3 ft 3 38 in)
Length over buffers 8,436 mm (27 ft 8 14 in)
Height 3,550 mm (11 ft 7 34 in)
Width 2,450 mm (8 ft 716 in)
Wheelbase 1,860 mm (6 ft 1 14 in)
Overall wheelbase 3,720 mm (12 ft 2 12 in)
Empty weight 33.6 tonnes (33.1 long tons; 37.0 short tons)
Service weight 43.5 tonnes (42.8 long tons; 48.0 short tons)
Adhesive weight 43.5 tonnes (42.8 long tons; 48.0 short tons)
Axle load 8.7 tonnes (8.6 long tons; 9.6 short tons)
Top speed 30 km/h (19 mph)
Starting tractive effort 76.15 kN (17,120 lbf)
Coupled wheel diameter 800 mm (31 12 in)
Driving wheel diameter 800 mm (2 ft 7 12 in)
Valve gear Heusinger
No. of cylinders Two
Cylinder bore 430 mm (16 1516 in)
Piston stroke 400 mm (15 34 in)
Boiler length 3,235 mm (10 ft 7.4 in)
Boiler Overpressure 14 bar (1.40 MPa; 203 psi)
No. of heating tubes 79
No. of smoke tubes 18
Heating tube length 3,240 mm (10 ft 7 12 in)
Grate area 1.60 m2 (17.2 sq ft)
Radiative heating area 5.58 m2 (60.1 sq ft)
Tube heating area 58.20 m2 (626.5 sq ft)
Superheater area 24.50 m2 (263.7 sq ft)
Evaporative heating area 63.77 m2 (686.4 sq ft)
Water capacity 4.66 m3 (1,030 imp gal) or 4,330 litres (950 imp gal; 1,140 US gal)
Fuel Coal: 2.5 tonnes (2.5 long tons; 2.8 short tons)

The DRG Class 99.19 engines were metre gauge, ten-coupled, superheated, steam locomotives that were employed in the southwestern German state of Württemberg from 1927.

In fact this class was to have been procured by the Royal Württemberg State Railways (Königlich Württembergische Staats-Eisenbahnen) as the Class Ts 5, however the intervention of the First World War and the serious economic situation that followed put paid to that.

In 1927 the Deutsche Reichsbahn-Gesellschaft ordered the construction of four of these locomotives from the Maschinenfabrik Esslingen. They were based on a Saxon VI K prototype that already ran on Württemberg's 750mm routes and replaced some ancient Klose locomotives that worked the metre gauge route between Altensteig and Nagold.[1] They were given operating numbers 99 191 - 99 194.

To negotiate the tight curves the first, third and fifth axles were given side play.

Engine number 99 191 was redeployed on 1 April 1944 to work the line between Eisfeld and Schönbrunn. In 1955 it was used in Gera. In the 1970s there was a plan to sell it to a museum railway, but the sale did not come to fruition and the engine was scrapped.

Locomotive number 99 192 was retired on 5 May 1959. Number 99 193 was retired on 30 November 1967 and was transferred into the ownership of EUROVAPOR, where it is used on the Blonay-Chamby museum railway in Switzerland. It was still there in 2007. There are various accounts of the whereabouts of 99 194. It probably ended up in Yugoslavia after the Second World War and was in service there until the late 1960s with the Yugoslav Railways ().

The engines could hold 2.5 tonnes of coal and 4.66 m2 of water.

See also

References

  1. Ransome-Wallis, P (1971). Preserved Steam Locomotives of Western Europe, Volume One. Ian Allan Ltd. ISBN 0-7110-0196-0. p 310
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.