Boyle temperature

The Boyle temperature is formally defined as the temperature for which the second virial coefficient, $B_{{2}}(T)$ becomes zero. It is at this temperature that the attractive forces and the repulsive forces acting on the gas particles balance out.

$p=RT\left({\frac {1}{V_{m}}}+{\frac {B_{2}(T)}{V_{m}^{2}}}+\dots \right)$

This is the virial equation of state and describes a real gas. Since higher order virial coefficients are generally much smaller than the second coefficient, the gas tends to behave as an ideal gas over a wider range of pressures when the temperature reaches the Boyle temperature (or when ${\textstyle c={\frac {1}{V_{m}}}}$ or p are minimized).

In any case, when the pressures are low, the second virial coefficient will be the only relevant one because the remaining concern terms of higher order on the pressure. We then have

{\frac {{\mathrm {d}}Z}{{\mathrm {d}}p}}=0\qquad {\mbox{if }}p=0

where $Z$ is the compressibility factor.

For negligible $b$ , using the van der Waals equation, one can prove $T_{b}={\frac {a}{Rb}}$ .^[1]^[2]

References

↑ Verma, K.S. Cengage Physical Chemistry Part 1. ISBN 978-81-315-3380-2 Section 5.14
↑ Smart learning (2015-10-22), Derivation of Boyle Temp from real Gas Equation Lecture Note-31 Class XI Chemistry, retrieved 2018-01-14

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.

[1] Verma, K.S. Cengage Physical Chemistry Part 1. ISBN 978-81-315-3380-2 Section 5.14

[2] Smart learning (2015-10-22), Derivation of Boyle Temp from real Gas Equation Lecture Note-31 Class XI Chemistry, retrieved 2018-01-14

Boyle temperature

See also

References