Blaser R8

Blaser R8
Blaser R8 custom grade rifles. The front rifle features an optional Mag-na-port muzzle brake.
Type Hunting rifle
Place of origin Germany
Production history
Manufacturer Blaser Jagdwaffen GmbH
Produced 2008-
Specifications
Weight 6.35 lb (2.88 kg)
Length 40.25 in (102.2 cm)
Barrel length 25.75 in (65.4 cm)
Cartridge .222 Remington through .500 Jeffery available
Action Straight-pull bolt-action
Feed system 5- to 2-round detachable box magazine + trigger unit
Sights iron sights or telescopic sight
Blaser R8 Profesional featuring a synthetic stock
Blaser R8 Profesional Success featuring a synthetic thumb-hole stock with non-slip inlays taken down in its traveling case

The Blaser R8 rifle series is based on the Blaser R93 rifle series that was discontinued as of 2016.[1] The R8 is a straight-pull bolt-action rifle with many uncommon features. The price of Blaser R8 rifles exceeds the price of typical hunting rifles sold in the United States, which accounts for their rarity in the United States.[2][3]

Design Features

The Blaser R8 straight-pull bolt action locks by a 14-lug radial collet in a 360 degrees groove in the barrel and is designed to withstand pressures significantly exceeding the Mauser 98–type bolt-action rifles. The Blaser R8 displays a locking surface of 96 mm2 (0.149 in2) compared to 56 mm2 (0.087 in2) for the Mauser 98.[4] The stressed parts are made out of hammer forged steel and plasma nitrided to make the locking mechanism work. Compared to the preceding R93 rifle series for additional safety the barrel has been thickened at the critical part, the groove has been enlarged and the locking angle of the collets has been steepened. Further the radial collet opens differently. The thus improved lockup of the R8 series comes at the price of a less smooth operating bolt when compared to the R93 series and some weight increase.

The Blaser R8 is a truly modular system built around an aluminium alloy receiver frame, offering differing stocks and barrels of varying length and thickness available in calibers from .222 Remington to .500 Jeffery.[2][3] Optionally a steel receiver frame can be ordered that increases the weight by approximately 550 g (1.21 lb). Aiming optics like telescopic sights mount on the barrel instead of the receiver. A sight/barrel assembly can be removed and replaced with no change in zero.

The Blaser R8 has an uncommon detachable box magazine/trigger unit. When detached it renders the rifle inoperable and safe. To avoid accidents with set triggers, Blaser offers the R8 only with a direct trigger. The compact detachable box magazine/trigger unit contributes to balancing the rifle, as the Blaser straight pull action is about 50 to 60 mm shorter than conventional bolt actions.

The Blaser R8 Professional S 'budget' variant lacked the detachable box magazine/trigger unit of the more expensive R8 variants. Since the Blaser R8 Professional S model most R8 variants became available without the detachable box magazine/trigger unit.

Parts for the preceding Blaser R93 series do not fit the Blaser R8 series rifles.

In 2009, Blaser and Carl Zeiss AG began offering a telescopic sight that switches on a red dot when a R93/R8 series rifle is cocked ("Zeiss Illumination Control/iC").

References

  1. ↑ "R93 Bolt Rifle". blaser-usa.com. Retrieved 26 February 2017.
  2. 1 2 "Straight Shooter: Blaser R8 Professional S Review". gundigest.com. Retrieved 26 February 2017.
  3. 1 2 "Blaser R8 Rifle: The Next Step". americanrifleman.org. Retrieved 26 February 2017.
  4. ↑ Jagdfregatte R8 {German}

Blaser Jagdwaffen GMBH


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.