BSSAP
| SS7 protocols by OSI layer | |
| Application | TCAP, CAP, ISUP, ... |
|---|---|
| Network | MTP Level 3 + SCCP |
| Data link | MTP Level 2 |
| Physical | MTP Level 1 |
BSS Application Part (BSSAP) is a protocol in Signaling System 7 used by the Mobile Switching Center (MSC) and the Base station subsystem (BSS) to communicate with each other using signalling messages supported by the MTP and connection-oriented services of the SCCP. For each active mobile equipment one signalling connection is used by BSSAP having at least one active transactions for the transfer of messages.[1]
BSSAP provides two kinds of functions:
- The BSS Mobile Application Part (BSSMAP) supports procedures to facilitate communication between the MSC and the BSS pertaining to resource management and handover control.
- The Direct Transfer Application Part (DTAP) is used for transfer of those messages which need to travel directly to a Mobile equipment from MSC by passing any interpretation by BSS. These messages are generally pertaining to Mobility management (MM) or Call Management (CM).
References
- ↑ 3GPP TS 48.008 Mobile Switching Centre - Base Station System (MSC-BSS) interface; Layer 3 specification
This article is issued from
Wikipedia.
The text is licensed under Creative Commons - Attribution - Sharealike.
Additional terms may apply for the media files.