Abbe error

Abbe error, named after Ernst Abbe, also called sine error, describes the magnification of angular error over distance. For example, when one measures a point that is 1 meter away at 45 degrees, an angular error of 1 degree corresponds to a positional error of over 1.745 cm, equivalent to a distance-measurement error of 1.745%. ^[1]

In machine design, some components are particularly sensitive to angular errors. For example, if the shaft of a lathe is angled slightly, the part will have errors in diameter far down the part. Vernier calipers are not free from abbe error, while screw gauges are free from abbe error. Abbe error is the product of the abbe offset and the sine of angular error in the system.

Abbe error can be detrimental to dead reckoning.

Formula:

\epsilon =h\sin \theta

$\epsilon$ the error.

$h$ the distance.

$\theta$ the angle.

References

↑ Leach, Richard (2014). "Abbe Error/Offset". CIRP Encyclopedia of Production Engineering. pp. 1–4. doi:10.1007/978-3-642-35950-7_16793-1. ISBN 978-3-642-35950-7.

External links

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.

[1] Leach, Richard (2014). "Abbe Error/Offset". CIRP Encyclopedia of Production Engineering. pp. 1–4. doi:10.1007/978-3-642-35950-7_16793-1. ISBN 978-3-642-35950-7.