20×110mm USN

20×110mm USN
Type Autocannon
Place of origin  USA
Service history
In service 1950s–present
Used by

United States Navy

Royal New Zealand Air Force
Wars Vietnam
Production history
Designer United States Navy
Specifications
Case type Rimless, bottleneck
Bullet diameter 19.9 mm (0.78 in)
Neck diameter 20.6 mm (0.81 in)
Base diameter 29 mm (1.1 in)
Rim diameter 29.5 mm (1.16 in)
Case length 109.5 mm (4.31 in)
Overall length 185 mm (7.3 in)
Primer type Electric
Maximum pressure 600 MPa (87,000 psi)

The 20×110mm USN (also known as 20×110mm US Navy and 20mm Mk-100 Series) was developed by the US Navy after World War II for use in Mk 11 and Mk 12 autocannon. They are called the Mk 100 series as they range from Mk 101 to Mk 109.

It has the same rim diameter as the 20×102mm but a different length and contour. It is not interchangeable with any other 20×110mm cartridge.[1]

Available loads

Some of the available loads for the 20×110mm USN are as follows:

NamePressure (PSI)Projectile weight (grains)Projectile TypeMuzzle Velocity (fps)Identification
Cartridge, 20mm, High Pressure Test, Mk 101 Mod 0 (USN)Not to exceed 72,5001700InertNot listedGreen or blue projectile with brown nose and 1/4 black letters reading "High Pressure Test Round"
Cartridge, 20mm, Low Pressure Test, Mk 102 Mod 0 (USN)Not listed1700InertNot listedGreen or blue projectile with brown nose and 1/4 black letters reading "Low Pressure Test Round"
Cartridge, 20mm, High Explosive Incendiary, Mk 105 Mod 0 (USN)Not to exceed 72,5001700Inert3350Green or blue projectile black lettering or blue projectile with brown nose and black lettering
Cartridge, 20mm, High Explosive Incendiary, Mk 106 Mod 0 & 1 (USN)600001700 ±50Impact detonating3350Unpainted fuze, red and yellow projectile
Cartridge, 20mm, Armor Piercing-Incendiary, Mk 107 Mod 0 (USN)600001700 ±50Armour Piercing Incendiary3350No fuze, Nose of projectile blue or brown with red band. Body of projectile black with white lettering.
Cartridge, 20mm, Armor Piercing-Tracer, Mk 108 Mod 0 (USN)600001700 ±50Armour Piercing Tracer3350No fuze. Hollow windshield. Brown or yellow nose, body of projectile black with white lettering.

There is also a Cartridge, 20mm, Dummy, Mk 103 Mod 0 (USN) which is an inert round. It has an empty primer pocket and holes in the case or a plugged primer pocket. It may be empty or filled with inert material. The projectile is usually brass or bronze plated.[2]

References

  1. Albert Watson III (1985). Small Calibre Ammunition Identification Guide, DST-1160G-514-82-VOL 2-CHG 1(Volume 2: 20mm to 40mm Cartridges.). Defence Intelligence Agency.
  2. Frank Barnes (2009). Layne Simpson, ed. Cartridges of the World (12th ed.). USA: Gun Digest Books. pp. 512–513.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.