152 mm /53 Italian naval gun Models 1926 and 1929

152 mm /53 Model 1926–1929
Type Naval gun
Place of origin Italy
Service history
In service 1926-1964
Used by Italy
Wars World War II
Production history
Designer Ansaldo
Designed 1926
Manufacturer Ansaldo
OTO Melara
Produced 1926-1929
Specifications
Weight Model 1926: 7.34 metric tons
Model 1929: 7.69 metric tons
Length 8.5 meters (27 ft 11 in)
Barrel length 8 meters (26 ft 3 in) 53 caliber

Shell weight Early: 50 kilograms (110 lb)
Late: 47.5 kilograms (105 lb)
Caliber 152 millimeters (6.0 in)
Breech Horizontal sliding breech block
Elevation Model 1926: -5° to +45°
Model 1929:-10° to +45°
Traverse -150° to +150°[1]
Rate of fire Model 1926: 4 rpm
Model 1929: 5-8 rpm
Muzzle velocity Early: 1,000 m/s (3,300 ft/s)
Late: 850 m/s (2,800 ft/s)
Maximum firing range Early: 28.4 kilometres (17.6 mi) at +45°
Late: 22.6 kilometres (14.0 mi) at +45°[2]

The 152 mm /53 Model 1926–1929 were built for the Italian Navy in the years before World War II. These guns were used on all Condottieri-class light cruisers except the Duca degli Abruzzi-class.

Construction

The Model 1926 was designed and manufactured by Ansaldo, while the Model 1929 was manufactured by OTO Melara. Although both models of gun were similar in construction, components from each manufacturer were not fully interchangeable.

Commonalities:
  • A tube
  • Jacket
  • Loose liner
  • Horizontal sliding breech block
Differences:
  • Thickness of liner
  • Size of breech ring
  • Length of jacket

The gun mounts had electrically powered training, elevation, hoists, rammers and the guns shared a common cradle. Improvements in ammunition handling meant that the rate of fire for the Model 1929 was nearly twice as fast as the Model 1926. Loading was at +20° for the Model 1926, while the model 1929 could be loaded at any angle up to 45°. These guns suffered from dispersion problems so the original muzzle velocity of 1,000 metres per second (3,300 ft/s) was reduced to 850 metres per second (2,800 ft/s) with AP shells. Shell weight was also reduced from 50 kilograms (110 lb) to 47.5 kilograms (105 lb) in an attempt to resolve these problems, but were only partially successful. The main reason for the dispersion problem was because the guns were mounted too close together on a common cradle, which also complicated loading of the guns.[3]

The majority of the Condottieri-classes had two superfiring twin-mount turrets forward and aft, except for the Duca degli Abruzzi-class which had different model guns and had two twin-turrets replaced with two triple-turrets. The Giussano-class carried Model 1926 guns, while the Cadorna-class, Montecuccoli-class and Duca d'Aosta-class carried Model 1929 guns. The mountings for the Giussano-class and Cadorna-class were found to be too lightly built for the recoil forces created by these guns.[4]

Ammunition

Ammunition was of quick fire separate loading type. The AP projectile was 63 centimetres (2.07 ft) long with a cartridge case and a bagged charge which weighed 21.43 kilograms (47.2 lb).

The gun was able to fire:

Surviving examples of Model 1929 guns salvaged from the Cruiser Raimondo Montecuccoli are located at the Città della Domenica theme and amusement park near Perugia, in Italy.

See also

Weapons of comparable role, performance and era

Notes

  1. 1 2 DiGiulian, Tony. "152 mm/53 (6") Models 1926 and 1929 - NavWeaps". navweaps.com.
  2. Campbell, Naval Weapons of WWII, p.328.
  3. Campbell, Naval Weapons of WWII, p.331-332.
  4. Campbell, Naval Weapons of WWII, p.331-332.

References

  • Campbell, John (1985). Naval Weapons of World War Two. Naval Institute Press. ISBN 0-87021-459-4.
  • Tony DiGiulian. "Italy 152 mm/53 (6") Models 1926 and 1929 - NavWeaps". navweaps.com. Retrieved 2017-03-02.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.