Tri-tet oscillator

A tri-tet oscillator is a crystal-controlled vacuum tube electronic oscillator circuit. It is a type of electron-coupled oscillator (ECO), which uses a tetrode or pentode tube.

The tri-tet was introduced by James J. Lamb in the June 1933 issue of QST magazine.[1]

In an ECO, The screen grid acts as a plate for the triode oscillator. Some of the electrons pass through the screen grid to the plate, causing a current to flow in the load. This effectively isolates the oscillator portion from the load, so that loading does not affect the operating frequency.[2]

Tri-Tet oscillator schematic

In the schematic shown, the C1/L1 tank circuit control the current through the crystal. It is normally tuned a point between the crystal's fundamental frequency and its first harmonic.

The C2/L2 tank circuit is tuned to the desired harmonic.

D+ acts as the "plate" voltage for the tetrode, and is slightly less than B+.

Jean Shepherd occasionally mentioned the tri-tet oscillator in his writing and radio shows. It was used as the oscillator in one of the first amateur radio transmitters he used.[3]

References

  1. Lamb, James J. “A More Stable Crystal Oscillator of High Harmonic Output.” QST June 1933: 30-32.
  2. Sterling, George E. 1940. The Radio Manual for Engineers, Inspectors, Students, Operators and Radio Fans. 3rd ed. New York: D. Van Nostrand Company, Inc.
  3. Shepherd, Jean (October 1980), "Some Guys Make It", 73 Magazine, Peterborough, NH
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.