TI-Nspire series

The standard TI-Nspire calculator is comparable to the TI-84 Plus in features and functionality. It features a TI-84 mode by way of a replaceable snap-in keypad and contains a TI-84 Plus emulator. The likely target of this is secondary schools that make use of the TI-84 Plus currently or have textbooks that cover the TI-83 (Plus) and TI-84 Plus lines, and to allow them to transition to the TI-Nspire line more easily.

The TI-Nspire started development in 2004. It uses a proprietary SoC of the ARM9 variant for its CPU. The TI-Nspire and TI-Nspire CAS (Computer algebra system) calculators have 32 MB of NAND Flash, 32 MB of SDRAM, and 512 KB of NOR Flash.[3] However, only 20 MB and 16 MB are user-accessible respectively[4]

The TI-Nspire released in two models; a numeric and CAS version. The numeric is similar in features to the TI-84, except with a bigger and higher resolution screen and a full keyboard. The feature that the numeric lacks is the ability to solve algebraic equations such as indefinite integrals and derivatives. To fill in the gap of needing an algebraic calculator, Texas Instruments introduced the second model with the name TI-Nspire CAS. The CAS is designed for college and university students, giving them the feature of calculating many algebraic equations like the Voyage 200 and TI-89 (which the TI-Nspire was intended to replace). However, the TI-Nspire does lack part of the ability of programming and installing additional apps that the previous models had, although a limited version of TI-BASIC is supported, along with Lua in later versions. C and assembly are only possible by Ndless.

Because the TI-Nspire lacks a QWERTY keyboard, it is acceptable for use on the PSAT, SAT,[5] SAT II, ACT,[6] AP, and IB Exams.

The TI-Nspire CAS calculator is capable of displaying and evaluating values symbolically, not just as floating-point numbers. It includes algebraic functions such as a symbolic differential equation solver: deSolve(...), the complex eigenvectors of a matrix: eigVc(...), as well as calculus based functions, including limits, derivatives, and integrals. For this reason, the TI-Nspire CAS is more comparable to the TI-89 Titanium and Voyage 200 than to other calculators. Unlike the TI-Nspire, it is not compatible with the snap-in TI-84 Plus keypad. It is accepted in the SAT and AP exams (without a QWERTY keyboard) but not in the ACT,[6] IB or British GCSE and A level. The body color is grey.

TI-Nspire EZ-Spot. Meant to reduce theft in schools.

On 8 March 2010, Texas Instruments announced new models of the TI-Nspire Touchpad and TI-Nspire CAS Touchpad graphing calculators. In the United States the new calculator was listed on the TI website as a complement to the TI-Nspire with Clickpad, though it was introduced as a successor to the previous model in other countries. The calculators were released alongside the OS 2.0 update, which featured a number of updates to the user interface and new functions.

The keyboards on the touchpad keypads featured a different and less crowded key layout along with the touchpad, which is used for navigation. The touchpad keypads are also compatible with older calculators that are running OS 2.0 or newer. The new calculators that were shipped with touchpad keypads supported an optional rechargeable battery. The second generation is also available in two models, the TI-Nspire Touchpad and TI-Nspire CAS Touchpad, and each model has maintained the color of itself, with the normal one being white and black while the CAS is black and gray.To reduce theft of school-owned TI-Nspire calculators, Texas Instruments also introduced the EZ-Spot Teacher Packs with a bright, easy-to-spot, "school bus yellow" frame and slide case. The hardware of both versions are the same, with the only differences being cosmetic. The TI-Nspire calculators that were released after the touchpad TI-Nspires also have EZ-Spot versions.

In 2011, the TI-Nspire CX and CX CAS were announced as updates to TI-Nspire series. They have a thinner design with a thickness of 1.57 cm (almost half of the TI-89), a 1200 mAh (1060mAh before 2013) rechargeable battery (wall adapter is included in the American retail package), a 320 by 240 pixel full color backlit display (3.2" diagonal), and OS 3.0 which includes features such as 3D graphing.[7]

The CX series were released in the same time frame as the Casio Prizm (fx-CG10/20),[8] Casio's color screen graphing calculator with similar features.

The TI-Nspire CX series differ from all previous TI graphing calculator models in that the CX series are the first to use a rechargeable 1060 mAh Lithium-Ion battery (upgraded to 1200 mAh in 2013 rev.). The device is charged via a USB cable. TI claims that the battery requires four hours to charge, that a full charge powers the device for up to two weeks under normal daily use, and that the battery should last up to 3 years before it requires replacement. The battery is user-replaceable.[7]

With the exception of interchangeable TI-84 keypads, the CX series retain all features of the previous TI-Nspire models. The colors of the calculator are still the same as those of the TI-Nspire models; the CX is white and dark blue, while the CX CAS is gray and black. The external connectors have changed slightly. The mini-USB port, located at the center on the top of the TI-Nspire series, has moved to the right on the top on the CX series. On the CX series, TI added a second port immediately left of the mini-USB port, for a new wireless module. The new wireless TI-Nspire Navigator adapter, which allows teachers to monitor students and send files, is not compatible with the previous TI-Nspire models. The third port, located at the bottom of the handheld, is for the TI Charging Dock and Lab Cradle. The keypad layout is very similar to that of the TI-Nspire Touchpad.

Both models have 100 MB of user memory and 64 MB of RAM. The retail package comes in a plastic blister case and doesn't have the full manual, while the teachers edition comes in a box with a TI-Nspire CX poster for classrooms and the full manual (in English and French in the US). Both devices ship with the student/teacher software for Windows/Mac OS X. According to Texas Instruments, The CX is accepted in SAT, IB, AP, ACT and British GCSE and A level exams. The CX CAS is only accepted on SAT and AP.

Four models aimed for the Chinese market were launched, with specialized features. All four models have Chinese labeled keyboards. The CX-C and CX-C CAS models are similar to CX and CX CAS, but included a concise Chinese-English dictionary. The CM-C and CM-C CAS are cheaper, featured a more stream-lined design, but have only 32MB of RAM and no port for the wireless module.[9] The systems of the Chinese versions are not interchangeable with those of the international models.

In 2019, Texas Instruments introduced the TI-Nspire CX II and TI-Nspire CX II CAS.[10] They feature a slightly different operating system with several enhancements and slightly improved hardware.

Like China, the continent of Europe also has models aimed for its market. These calculators include a "-T" after the CX. The CX II-T and CX II-T CAS both have different body color designs than their North American counterparts. One of the main feature differences in the European versions is the inclusion of an exact math engine in the non-CAS version. European models also omit the WiFi adapter port from the top of the calculator.

The TI-Nspire Lab Cradle is a Calculator-Based Laboratory system introduced in 1994. It is a portable data collection device for the life sciences. The CBL system was replaced in 1999 by the CBL 2. The TI-Nspire Lab Cradle has three analog and two digital inputs with a sampling rate of up to 100,000 readings per second. The cradle also has 32 MB of storage space to store sensor data.[14] The Lab Cradle allows the TI-Nspire series to communicate with older Calculator-Based Laboratory systems that previous TI calculators used (TI-73 series, TI-82, TI-83 series, TI-85, and TI-86).[15]

The TI-Nspire Lab Cradle used the rechargeable battery of the TI-Nspire and support three different charging options: wall adapter, USB cable to computer and TI-Nspire Cradle Charging Bay. The TI-Nspire Lab Cradle is marketed by Texas Instruments and developed as part of an ongoing business venture between TI and Vernier Software & Technology of Portland, Oregon.

The Navigator system allows teachers to connect multiple TI-Nspire calculators to a computer through the TI-Nspire Access Point and TI-Nspire Navigator Wireless Cradles. The system includes the TI-Nspire cradle charging bay and the main system which looks like a wireless router. The Navigator system was first available when the first generation Nspires were launched, but when the TI-Nspire CX and CX CAS were released, a new wireless adapter was announced that is smaller but not compatible with the TI-Nspire and TI-Nspire Touchpad.

Press-to-Test is a feature that restricts access to the user's documents and certain features of the calculator for a limited time. Its intended purpose is to prevent cheating on tests and exams. Press-to-Test is enabled by pressing a certain button combination when turning on the calculator. The features that are blocked (for example 3D graphs and drag & drop for graphs) can be selectively enabled, but access to existing documents is always prohibited. When the handheld is running in Press-to-Test mode, an LED on top of it blinks to indicate that Press-to-Test hasn't been disabled. Press-to-Test can only be disabled by connecting to another calculator or a computer with TI-Nspire compatible software installed. Removing the batteries or pressing the reset button will not disable it.

Ndless (alternatively stylized Ndl3ss) is a third-party jailbreak for the TI-Nspire calculators that allows native programs, such as C, C++ and ARM assembly programs, to run. Ndless was developed initially by Olivier Armand and Geoffrey Anneheim and released in February 2010 for the Clickpad handheld.[16] Organizations such as Omnimaga and TI-Planet promoted Ndless and built a community around Ndless and Ndless programs. With Ndless, low-level operations can be accomplished, for example overclocking, allowing the handheld devices to run faster. Downgrade prevention can be defeated as well. In addition, Game Boy, Game Boy Advance, and Nintendo Entertainment System emulators exist for the handhelds with Ndless.[17] Major Ndless-powered programs also include a port of the game Doom.[18] Unlike Lua scripts, which are supported by Texas Instruments,[19] Ndless is actively counteracted by TI, with the company infamously attempting to block Ndless from operating with each subsequent version of its OS.[20]

Starting with OS 2.0, additional features were added to increase usability and usefulness of the TI-Nspire. Below are major changes that were made. These features have stayed with the Nspire series to date.

• Scratchpad (Easily and quickly use a calculator and graph)
• New, more organized home screen
• Calculator application changes
  • Solving of systems of equations (linear or non-linear)
  • Complex and real roots of polynomials
  • Derivative at a point
  • Remainder, quotient, coefficients, and degree of polynomials
  • Greatest common divisor
  • Central difference quotient with steps
  • Creation of a zero matrix
• New programming capabilities
  • Ability to separate a programming page from a calculator page
  • Request and RequestStr I/O functions
  • Output text
• Graphs application changes
  • Can toggle table of values
  • Can hide object selection guides
  • Custom sequence graphs
  • Zoom to decimal
  • Analyze Graph menu
    • Zero
    • Minimum
    • Maximum
    • Intersection
    • Inflection
    • dy/dx
    • Integral
• New geometry application is simply a graphing application that can only make shapes
• Data and Statistics application changes
  • Ability to add X and Y variables with frequency
• Notes application changes
  • Calculations in the Notes application,
• New graph settings page

Images can be included in TI-Nspire documents using the computer software. They can then be displayed on the Nspire calculators and in full color on the Nspire CX calculators. Graphs can be drawn on top of the images. A data collection application is included with the OS, for use with the Lab Cradle. 3D graphing is supported, as well as differential equations. Other features were also added, including improvements to functions that are related to statistics.[27] OS 3.0 also adds the ability to run programs that are written in Lua.[28][12] OS 3.0.1 introduced a number of bugs,[29] but most of these have been fixed as of 3.0.2.[30] In OS 3.2, conic equations in standard formats can be graphed and a new chemistry feature, Chem Box, allows users to write chemical notations.[31] OS 3.2 also saw the inclusion of the Chipmunk physics engine for use in Lua programs.[32] In OS 3.9, the area between curves can now be calculated on the graph bar.[33]

An indicator now displays the angle mode (Degrees, Radians or Gradians) in effect for the current application. In window settings on graphs, exact inputs such as 7/3 or 2*π can now be used for input of custom window settings.[34]

OS 5.0 is currently exclusive to the CX II/CX II CAS and their -T counterparts. These features were added in this release:

• Animated Path plot
• Modernized user interface
• Dynamic coefficient values
• Points by coordinates
• Tick-mark labels
• Various TI-Basic programming enhancements
• Simplified Disable CAS (CAS model exclusive)
• DeSolve wizard (CAS model exclusive)