Stub Series Terminated Logic

Stub Series Terminated Logic (SSTL) is a group of electrical standards for driving transmission lines commonly used with DRAM based DDR memory IC's and memory modules. SSTL is primarily designed for driving the DDR (double-data-rate) SDRAM modules used in computer memory; however, it is also used in other applications, notably some PCI Express PHYs and other high-speed devices.[1]

Four voltage levels for SSTL are defined:

  • SSTL_3, 3.3 V, defined in EIA/JESD8-8 1996
  • SSTL_2, 2.5 V, defined in EIA/JESD8-9B 2002 used in DDR among other things.
  • SSTL_18, 1.8 V, defined in EIA/JESD8-15A, used in DDR2 among other things.
  • SSTL_15, 1.5 V, Used in DDR3 among other things.

SSTL_3 uses a reference of .45*VDDQ(1.5V). SSTL_2 and SSTL_18 reference a voltage that is exactly VDDQ/2(1.25V and .9V respectively).[2]

SSTL_3 and SSTL_2 support two termination classes (50 ohm or 25 ohm load). SSTL_18 only supports one (25 ohm load).

See also

  • High-Speed Transceiver Logic - HSTL

References

  1. Jaci Chang Design Considerations for the DDR3 Memory Sub-system. Jedex, 2004, p. 4. http://www.jedex.org/images/pdf/samsung%20-%20jaci_chang.pdf
  2. Tom Granberg Handbook of Digital Techniques for High-Speed Digital Design. Pearson Education, 2004, p. 160-161.

JEDEC homepage links; require (free) login:


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.