S5/8

S5/8 was a serial communications standard devised in the United Kingdom in the 1980s as a simplified subset of RS-232 intended to make interoperability easier. Although published by the British Standards Institution as standard DD 153:1990, it was not widely adopted, and the BSI standard was later withdrawn.

Description

S5/8 differed from RS-232 in using 0 and +5 V signalling levels, simplified handshaking, and a fixed data transfer rate of 9600 bits per second. An 8-pin DIN 45326 connector was specified as standard, although a physically-compatible 180-degree 5-pin DIN connector could be used to carry a subset of the signals. Data transmission consisted of frames containing one start bit, 8 data bits and one stop bit, with no parity bit.

Two classes of device were specified, D and S. D-devices could supply power (5 V up to 20 mA) at the connector, whereas S-devices could derive power from a connected D-device.

Pin assignment

NumberNameDescription
1DINPData input
2GROUNDSignal ground
3DOUTData output
4HINPHandshake input
5HOUTHandshake output
6SINPSecondary input
7SOUTSecondary output
8V++5 volts

Applications

The S5/8 standard was adopted by a few British microcomputers, such as the Thorn EMI Liberator and the CST Thor XVI.

References

  • Smith, Tony (14 November 2012). "Liberator: the untold story of the first British laptop (part 2)". The Register. Retrieved 1 March 2013.
  • Tooley, Michael (1997). Newnes Data Communications Pocket Book. Newnes. pp. 107–108. ISBN 9780750628846. Retrieved 1 March 2013.
  • S5/8 serial interface for the interconnection of data processing equipment. British Standards Institution. 1990. ISBN 0-580-18001-8. Retrieved 1 March 2013.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.