Rear-view mirror

Ray Harroun's Marmon "Wasp" with its rear-view mirror mounted on struts above the car on display in the Indianapolis Motor Speedway Hall of Fame Museum.

Among the rear-view mirror's early uses is a mention by Dorothy Levitt in her 1909 book The Woman and the Car which noted that women should "carry a little hand-mirror in a convenient place when driving" so they may "hold the mirror aloft from time to time in order to see behind while driving in traffic". However, earlier use is described in 1906, in a trade magazine noting mirrors for showing what is coming behind now popular on closed bodied automobiles, and to likely be widely adopted in a short time.[1] The same year, a Mr. Henri Cain from France patented a "Warning mirror for automobiles".[2] The Argus Dash Mirror, adjustable to any position to see the road behind, appeared in 1908.[3][4] Earliest known rear-view mirror mounted on a racing vehicle appeared on Ray Harroun's Marmon race car at the inaugural Indianapolis 500 race in 1911.[5] Harroun himself claimed he got the idea from seeing a mirror used for a similar purpose on a horse-drawn vehicle in 1904.[6] Harroun also claimed that the mirror vibrated constantly due to the rough brick surface, and it was rendered largely useless.[7]

Elmer Berger is usually credited with inventing the rear-view mirror, though in fact he was the first to patent it (1921) and develop it for incorporation into production street going automobiles by his Berger and Company.

Recently, rear-view video cameras have been built into many new model cars, this was partially in response to the rear-view mirrors' inability to show the road directly behind the car, due to the rear deck or trunk obscuring as much as 3–5 meters (10–15  feet) of road behind the car. As many as 50 small children are killed by SUVs every year in the USA because the driver cannot see them in their rear-view mirrors.[8] Camera systems are usually mounted to the rear bumper or lower parts of the car, allowing for better rear visibility.

There are three types of rearview cameras. Surface Mounted Flush Mounted License Mounted

Surface Mounted Cameras These cameras are mounted on a flat surface of the vehicle by focusing them high up. By doing so they provide a perfect view and an excellent depth perception. These features make this type of camera to be more efficient and that’s why they are chosen for larger vehicles so they would produce a better picture with a wider angle.

Flush Mounted Cameras Flush mounted cameras can be installed in any hole that is present in the backside of the vehicle so that they produce a nice and clean image. Though they provide a clear image it is not possible for these types of rearview cameras to provide a deeper view as the surface mounted camera unit.

License Mounted Cameras It is usually mounted on an existing license plate hole which may not require drilling of new holes to mount the camera. Thus they can be installed easily. The camera is placed depending on the placement of the license plate in the car

Aftermarket secondary rear-view mirrors are available. They attach to the main rear-view mirror and are independently adjustable to view the back seat. This is useful to enable adults to monitor children in the back seat.

Glare from a following vehicle's headlamps in a rear view mirror

Prismatic anti-glare

Day position Night position In the "day" position, the driver sees the road behind by reflection on the (rear) metal surface. In the "night" position, the driver sees the dimmer reflection on the (front) glass coating. The light is attenuated in the second mode, which partially compensates the pupillary response.

A prismatic rear-view mirror—sometimes called a "day/night mirror"—can be tilted to reduce the brightness and glare of lights, mostly for high-beam headlights of vehicles behind which would otherwise be reflected directly into the driver's eyes at night. This type of mirror is made of a piece of glass that is wedge-shaped in cross-section—its front and rear surfaces are not parallel.

On manual tilt versions, a tab is used to adjust the mirror between "day" and "night" positions. In the day view position, the front surface is tilted and the reflective back side gives a strong reflection. When the mirror is moved to the night view position, its reflecting rear surface is tilted out of line with the driver's view. This view is actually a reflection of the low-reflection front surface; only a much-reduced amount of light is reflected in the driver's eyes.

"Manual tilt" day/night mirrors first began appearing in the 1930s and became standard equipment on most passenger cars and trucks by the early 1970s.

On trucks and buses, the load often blocks rearward vision out the backlight. In the U.S. virtually all trucks and buses have a side view mirror on each side, often mounted on the doors and viewed out the side windows, which are used for near vision. These mirrors leave a large unviewable (“blind”) area behind the vehicle, which tapers down as the distance increases. This is a safety issue which the driver must compensate for, often with a person guiding the truck back in congested areas, or by backing in a curve.[10] “Spot mirrors”, a convex mirror which provides a distorted image of the entire side of the vehicle, are commonly mounted on at least the right side of a vehicle. In the U.S. mirrors are considered “safety equipment”, and are not included in width restrictions.[11][12]

Depending on the type of motorcycle, the motorcycle may or may not have rear-view mirrors. Street-legal motorcycles are generally required to have rear-view mirrors. Motorcycles for off-road use only normally do not have rear-view mirrors. Rear-view mirrors come in various shapes and designs and have various methods of mounting the mirrors to the motorcycle, most commonly to the handlebars. Rear-view mirrors can also be attached to the rider's motorcycle helmet.