Queen post

A queen post is a tension member in a truss that can span longer openings than a king post truss. A king post uses one central supporting post, whereas the queen post truss uses two.[1] Even though it is a tension member, rather than a compression member, they are commonly still called a post. A queen post is often confused with a queen strut, one of two compression members in roof framing which do not form a truss in the engineering sense.[2]

Day Bridge in Southwestern Pennsylvania (Morgan Township, Green County)
Queen Post
Interior structure of a covered bridge that uses a queen-post structure
AncestorTruss bridge
RelatedNone
DescendantNone
CarriesPedestrians, livestock, vehicles
Span rangeshort to medium
Materialwood planks
MovableNo
Design effortmedium
Falsework requiredSometimes

Architecture

A queen-post bridge has two uprights, placed about one-third of the way from each end of the truss. They are connected across the top by a beam and use a diagonal brace between the outer edges. The central square between the two verticals is either unbraced (on shorter spans), or has one or two diagonal braces for rigidity. A single diagonal reaches between opposite corners; two diagonal braces may either reach from the bottom of each upright post to the center of the upper beam, or form a corner-to-corner "X" inside the square.[3]

See also

References
  1. Gopi, Satheesh. Basic civil engineering. New Delhi: Dorling Kindersley (India) Pvt. Ltd., 2010. 155. Print. ISBN 8131729885
  2. "Timber Framing for Beginners: VI. Glossary of Terms" Timber Framing Vol. 68 June 2003. 12. "Archived copy" (PDF). Archived from the original (PDF) on December 7, 2012. Retrieved December 10, 2012.CS1 maint: archived copy as title (link)
  3. American Barns and Covered Bridges, Eric Sloane, Wilfred Funk, Inc. New York, New York; 1954, pg 96-97


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.