Probabilistic data association filter

The Probabilistic Data Association Filter (PDAF)[1] is a statistical approach to the problem of plot association (target-measurement assignment) in a target tracking algorithm. Rather than choosing the most likely assignment of measurements to a target (or declaring the target not detected or a measurement to be a false alarm), the PDAF takes an expected value, which is the minimum mean square error (MMSE) estimate. The PDAF on its own does not confirm nor terminate tracks.

Whereas the PDAF is only designed to track a single target in the presence of false alarms and missed detections, the Joint Probabilistic Data Association Filter (JPDAF) can handle multiple targets. The first real-world application of the PDAF was probably in the Jindalee Operational Radar Network,[1] which is an Australian over-the-horizon radar (OTHR) network.

Implementations

Matlab: The PDAF and JPDAF algorithms are implemented in the singleScanUpdate function that is part of the United States Naval Research Laboratory's free Tracker Component Library.[2]

References

Bar-Shalom, Yaakov; Daum, Fred; Huang, Jim (December 2009). "The probabilistic data association filter". IEEE Control Systems Magazine. 29 (6): 82–100. doi:10.1109/MCS.2009.934469.
"Tracker Component Library". Matlab Repository. Retrieved January 5, 2019.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.

[PDAFControl-1] Bar-Shalom, Yaakov; Daum, Fred; Huang, Jim (December 2009). "The probabilistic data association filter". IEEE Control Systems Magazine. 29 (6): 82–100. doi:10.1109/MCS.2009.934469.

[2] "Tracker Component Library". Matlab Repository. Retrieved January 5, 2019.