Personal Protective Equipment at Work Regulations 1992

The Personal Protective Equipment at Work Regulations 1992 are a set of regulations created under the Health and Safety at Work etc. Act 1974 which came into force in Great Britain on 1 January 1993.[1] The regulations place a duty on every employer to ensure that suitable personal protective equipment is provided to employees who may be exposed to a risk to their health or safety while at work.[2]

Personal Protective Equipment

Personal Protective Equipment (PPE) is defined in the regulations as "all equipment (including clothing affording protection against the weather) which is intended to be worn or held by a person at work which protects them against one or more risks to their health and safety". PPE would include such things as hard hats, eye protection, safety harnesses, life jackets and safety footwear.[3] The regulations however do not apply where requirements for PPE are detailed in other regulations, these include the:

The Health and Safety at Work etc. Act 1974 also states that employers are not allowed to charge for any PPE that is used for work.[5]

Other requirements

The Regulations also impose requirements with respect to—

  • compatibility of items of personal protective equipment where it is necessary to wear or use more than one item simultaneously.
  • the making, review and changing of assessments in relation to the choice of personal protective equipment.
  • the maintenance (including replacement and cleaning as appropriate) of personal protective equipment.
  • the provision of accommodation for personal protective equipment.
  • the provision of information, instruction and training.
  • ensuring personal protective equipment is used.[6]

Prosecutions arising from the regulations

On 25 June 2008 a moulding company in Leicester was fined £5,300 and ordered to pay £2,134.10 after an employee suffered serious burns after he removed a mould plug during a routine operation at Harrison Castings Ltd. The burns required several skin grafts and five days in hospital for the employee.[7] Inspector Munera Sidat said that the accident could have been prevented had the company provided the right type of gloves saying "Instead of foundry gloves which provide heat resistance, he was wearing rigger gloves which offered him very little protection. Not only did the molten metal permeate straight through the material, but the gloves were also so short that the liquid went up his jacket sleeves, making his burns worse."[7] The company was charged under regulation 6 of the regulations which states that an assessment of the PPE provided should be made to ensure that it is suitable for the task". [7]

References

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.