Laguerre transformations

A Laguerre transformation is a function of the form ${\displaystyle z\mapsto {\frac {az+b}{cz+d}}}$ where ${\displaystyle a,b,c,d}$ are all dual numbers, ${\displaystyle z}$ lies on the dual number projective line, and ${\displaystyle ad-bc}$ is not a zero divisor.

A dual number is a hypercomplex number of the form ${\displaystyle x+y\epsilon }$ where ${\displaystyle \epsilon ^{2}=0}$ but ${\displaystyle \epsilon \neq 0}$. This can be compared to the complex numbers which are of the form ${\displaystyle x+yi}$ where ${\displaystyle i^{2}=-1}$. The dual number projective line adjoins to the dual numbers a set of numbers of the form ${\displaystyle {\frac {1}{k\epsilon }}}$ for any real ${\displaystyle k}$.

A line which makes an angle ${\displaystyle \theta }$ with the x-axis, and whose x-intercept is denoted ${\displaystyle s}$, is represented by the dual number

${\displaystyle z=\tan(\theta /2)(1+\epsilon s).}$

The above doesn't make sense when the line is parallel to the x-axis. In that case, if ${\displaystyle \theta =\pi }$ then set ${\displaystyle z={\frac {-2}{\epsilon R}}}$ where ${\displaystyle R}$ is the y-intercept of the line. This may not appear to be valid, as one is dividing by a zero divisor, but this is a valid point on the projective dual line. If ${\displaystyle \theta =2\pi }$ then set ${\displaystyle z={\frac {1}{2}}\epsilon R}$.

Finally, observe that these coordinates represent oriented lines. An oriented line is an ordinary line with one of two possible orientations attached to it. This can be seen from the fact that if ${\displaystyle \theta }$ is increased by ${\displaystyle \pi }$ then the resulting dual number representative is not the same.

It's possible to express the above line coordinates as homogeneous coordinates ${\displaystyle z=[\sin(\theta /2)+{\frac {1}{2}}\epsilon R\cos(\theta /2):\cos(\theta /2)-{\frac {1}{2}}\epsilon R\sin(\theta /2)]}$ where ${\displaystyle R}$ is the perpendicular distance of the line from the origin. This representation has numerous advantages: One advantage is that there is no need to break into different cases, such as parallel and non-parallel. The other advantage is that these homogeneous coordinates can be interpreted as vectors, allowing us to multiply them by a matrix.

Every Laguerre transformation can be represented as a 2x2 matrix whose entries are dual numbers. Additionally, as long as the determinant of a 2x2 dual-numbered matrix is not nilpotent, then it represents a Laguerre transformation.

Laguerre transformations do not act on points. This is because if three oriented lines pass through the same point, their images under a Laguerre transformation do not have to meet at one point.

Laguerre transformations can be seen as acting on oriented circles as well as oriented lines. An oriented circle is one which either has a clockwise or anti-clockwise orientation. An anti-clockwise orientation is considered to be positive, while a clockwise orientation is considered to be negative. The radius of a negatively oriented circle is negative. Whenever a set of oriented lines are tangent to the same oriented circle, their images under a Laguerre transformation share this property, but possibly for a different circle. An oriented line is tangent to an oriented circle if the two figures touch and their orientations agree.

Figure 1: Two circles initially with opposite orientations undergoing axial dilatation

The following can be found in Isaak Yaglom's Complex numbers in geometry.[1]

Mappings of the form ${\displaystyle z\mapsto {\frac {pz-q}{{\bar {q}}z+{\bar {p}}}}}$ express rigid body motions. The matrix representations of these transformations span a subalgebra isomorphic to the dual-complex numbers.

The mapping ${\displaystyle z\mapsto -z}$ represents a reflection about the x-axis, followed by a reversal of orientation.

The transformation ${\displaystyle z\mapsto 1/z}$ expresses a reflection about the y-axis, followed by a reversal of orientation.

An axial dilatation by ${\displaystyle t}$ units is a transformation of the form ${\displaystyle {\frac {2z+\epsilon t}{(-\epsilon t)z+2}}}$. A dilatation by ${\displaystyle t}$ units increases the radius of all oriented circles by ${\displaystyle t}$ units while preserving their centres. If a circle has negative orientation, then its radius is considered negative, and therefore for some positive values of ${\displaystyle t}$ the circle actually shrinks. A progressive dilatation is depicted in Figure 1, in which two circles of opposite orientations undergo the same dilatation.

On lines, an axial dilatation by ${\displaystyle t}$ units maps any line ${\displaystyle z}$ to a line ${\displaystyle z'}$ such that ${\displaystyle z}$ and ${\displaystyle z'}$ are parallel, and the perpendicular distance between ${\displaystyle z}$ and ${\displaystyle z'}$ is ${\displaystyle t}$. Lines that are parallel but have opposite orientations move in opposite directions.

Figure 2: A grid of lines undergoing ${\displaystyle z\mapsto kz}$ for ${\displaystyle k}$ varying between ${\displaystyle 1}$ and ${\displaystyle 10}$.

Figure 3: Two circles that initially differ only in orientation undergoing the transformation ${\displaystyle z\mapsto kz}$ for ${\displaystyle k}$ varying from ${\displaystyle 1}$ and ${\displaystyle 10}$.

The transformation ${\displaystyle z\mapsto kz}$ for a value of ${\displaystyle k}$ that's real preserves the x-intercept of a line, while changing its angle to the x-axis. See Figure 2 to observe the effect on a grid of lines (including the x axis in the middle) and Figure 3 to observe the effect on two circles that differ initially only in orientation (to see that the outcome is sensitive to orientation).

All Laguerre transformations are either:

• Direct Euclidean isometries followed by an axial dilatation.
• Indirect Euclidean isometries, followed by an axial dilatation, followed by orientation reversal.
• Indirect Euclidean isometries, followed by a transformation of the form ${\displaystyle z\mapsto kz}$ for ${\displaystyle k}$ a real number, followed by orientation reversal.

• Laguerre plane
• Isaak Yaglom
• Line coordinates