L94A1 chain gun

L94A1 is the British Ministry of Defence designation for the long-barrelled version of the Hughes EX-34 7.62 mm chain gun, which is fitted to several British Army armoured fighting vehicles, including the Challenger 2 and the Warrior. A second version with a shorter barrel, designated L95A1, was also procured in small numbers.

L94A1
L94A1 mounted in the turret of an FV512.
TypeChain gun
Place of originUnited Kingdom
Service history
Used byBritish Army
WarsGulf War, 2003 invasion of Iraq
Production history
ManufacturerHeckler & Koch
Unit cost£ 7,920[1]
Produced1980 to early 1990s, 1996-1998
VariantsEX-31, L95A1 (short barreled version)
Specifications
Mass17.86 kg
Length1.25 m
Barrel length703 mm

Cartridge7.62×51mm NATO (linked)
Calibre7.62 mm
ActionElectrically driven
Rate of fire520 to 550 rounds per minute
Muzzle velocity862 m/s
Feed systemdisintegrating link belt

The weapon was produced by Heckler & Koch in the UK.

Design

The EX-34 was specifically designed for use as a coaxial weapon in armoured vehicles, and has a number of features that make it suitable for this role. The gun is externally powered, meaning that misfires do not need to be manually cleared, instead the rounds are simply ejected. All spent cases are ejected forwards out of the turret. This prevents any build-up of spent shell cases causing stoppages. Additionally, all gas generated by firing is vented through the barrel and ejection tube, preventing the build-up of toxic gases inside the armoured vehicle. The weapon is cooled by a venturi system, which draws cool air down the jacket and acts as a fume extractor.

The weapon was originally intended as a replacement for the coaxial weapon in the American M60 tank. The weapon was evaluated by both the US Army and the US Naval weapon center, who reported that the performance of the weapon was outstanding during all phases of testing.[2] However, neither chose to adopt the weapon.

During testing conducted by Hughes, the weapon proved extremely reliable, firing two 10,000 round bursts lasting 20 minutes at 500 rounds per minute.[2] It has a reported rounds between failure rate of approximately 50,000 rounds.

Problems

Problems with the electrical systems in the Warrior IFV have caused the weapon to fire without warning several times, resulting in the army issuing a safety notice. In at least one incident, this has resulted in injury to a British soldier and in others injuries to civilians[3] The MoD denied the problem initially.[4]

Additionally, the Challenger 2 mounting of the weapon cannot be accurately aimed using the main sight below a minimum range of 200 metres, which has led to at least one death from "friendly fire".

Notes

  1. Per gun cost (including tooling), based on Jane's reported H&K contract value of £4.7 million for 606 weapons
  2. The Machine Gun Volume 5, George M. Chinn
  3. Gerald Howarth MP - Warrior Chain Gun Putting Lives at Risk Archived 2006-09-02 at the Wayback Machine
  4. Army machine gun 'fires without trigger being pulled' Telegraph 02 Nov 2008

References

  • Jane's Infantry weapons 1990-1991
  • Jane's Infantry weapons 2005-2006
  • The Machine Gun. Volume V, George M. Chinn.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.