Kenmare Municipal Airport
Kenmare Municipal Airport (FAA LID: 7K5) is a mile southeast of Kenmare, in Ward County, North Dakota.[1] The National Plan of Integrated Airport Systems for 2011–2015 categorized it as a general aviation facility.[2]
Kenmare Municipal Airport | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Summary | |||||||||||
| Airport type | Public | ||||||||||
| Owner | Kenmare Airport Authority | ||||||||||
| Serves | Kenmare, North Dakota | ||||||||||
| Elevation AMSL | 1,962 ft / 598 m | ||||||||||
| Coordinates | 48°40′03″N 102°02′51″W | ||||||||||
| Map | |||||||||||
  7K5 | |||||||||||
| Runways | |||||||||||
| |||||||||||
| Statistics (2012) | |||||||||||
| |||||||||||
Facilities
The airport covers 158 acres (64 ha) at an elevation of 1,962 feet (598 m). Its single runway, 8/26, is 3,700 by 60 feet (1,128 x 18 m).[1]
In the year ending August 14, 2012 the airport had 3,175 aircraft operations, average 264 per month: 91% general aviation and 9% air taxi. 21 aircraft were then based at this airport: 95% single-engine and 5% helicopter.[1]
See also
References
- FAA Airport Master Record for 7K5 (Form 5010 PDF). Federal Aviation Administration. Effective November 15, 2012.
-
"2011–2015 NPIAS Report, Appendix A" (PDF). National Plan of Integrated Airport Systems. Federal Aviation Administration. October 4, 2010. Archived from the original (PDF, 2.03 MB) on September 27, 2012. External link in
|work=(help)
External links
- Airport page at City of Kenmare website
- Kenmare (7K5) at North Dakota Aeronautics Commission airport directory
- Aerial image as of September 1995 from USGS The National Map
- FAA Terminal Procedures for 7K5, effective April 23, 2020
- Resources for this airport:
- FAA airport information for 7K5
- AirNav airport information for 7K5
- FlightAware airport information and live flight tracker
- SkyVector aeronautical chart for 7K5
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.