International Standard Payload Rack

The International Standard Payload Rack (ISPR) is a steel framework container that is designed and been adopted by the International Space Station (ISS) program to support efficient integration and interchangeability of space payload hardware, such as machines and experiments. A typical rack contains 37 ISPR slots for science payloads, which are interchangeable to accommodate different components or payloads.

Technical diagram of ISPR
An ISPR being fitted in the US Destiny lab module
International Standard Payload Rack

Capabilities

Each ISPR provides 1.571 m3 (55.5 ft3) of internal volume being about 2 m (79.3 in) high, 1.05 m (41.3 in) wide, and 85.9 cm (33.8 in) deep. The rack weighs 104 kg (230 lb) and can accommodate an additional 700 kg (1540 lb) of payload equipment. The rack has internal mounting provisions to allow attachment of secondary structure. The ISPRs will be outfitted with a thin center post to accommodate sub-rack-sized payloads, such as the 483 mm (19-inch rack) Spacelab Standard Interface Rack (SIR) Drawer or the Space Shuttle Middeck Locker. Utility pass-through ports are located on each side to allow cables to be run between Racks. Module attachment points are provided at the top of the rack and via pivot points at the bottom. The pivot points support installation and maintenance. Tracks on the exterior front posts allow mounting of payload equipment and laptop computers. Additional adapters on the ISPRs are provided for ground handling.

Compatibility

The International Standard Payload Rack are the size of a side-by-side refrigerator, and is too big to fit through the Russian probe and drogue docking system, APAS, or NDS docking systems, and therefore cannot be transferred directly from a Progress, ATV, Space Shuttle, or Orion to the ISS.[1] In the past ISPRs were delivered in Multi-Purpose Logistics Modules, which were carried in the Space Shuttle cargo bay and berthed to CBM ports. As of 2011 they can only be delivered using the Japanese H-II Transfer Vehicle.[2]

Other ISPR systems

Japan has developed an ISPR with interfaces and capabilities nearly identical to NASA's.

See also

References
  1. "HTV-3 arrives to make large delivery of supplies and research cargo to ISS | NASASpaceFlight.com". www.nasaspaceflight.com. Retrieved 2016-04-16.
  2. Harding, Pete (2010-10-20). "ISS Prepares for Busy Upcoming Year of Logistics Operations". Nasaspaceflight. Retrieved 18 September 2011. Bay one can carry four International Standard Payloads Racks (ISPRs), than can be removed from the HTV and transferred to the ISS.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.