Inhour equation

The Inhour equation used in nuclear reactor kinetics to relate reactivity and the reactor period.[1] Inhour is short for "inverse hour" and is defined as the reactivity which will make the stable reactor period equal to 1 hour (3,600 seconds).[2] Reactivity is more commonly expressed as per cent millie (pcm) of Δk/k or dollars.[3]

The Inhour equation is obtained by dividing the reactivity equation, Equation 1, by the corresponding value of the inhour unit, shown by Equation 2.[2]

[Equation 1]

[Equation 2]

       ρ = reactivity
       l*= neutron generation time
       Tp= reactor period
       βi= fraction of delayed neutrons of ith kind
       λi= precursor decay constant of ith kind

For small reactivity or large reactor periods, unity may be neglected in comparison with λiTp and λi3600 and the Inhour equation can be simplified to Equation 3.[2]

[Equation 3]

The inhour equation is initially derived from the point kinetics equations. The point reactor kinetics model assumes that the spatial flux shape does not change with time. This removes spatial dependencies and looks at only changes with times in the neutron population.[3] The point kinetics equation for neutron population is shown in Equation 4.

[Equation 4]

where k = multiplication factor (neutrons created/neutrons destroyed)

The delayed neutrons (produced from fission products in the reactor) contribute to reactor time behavior and reactivity.[4] The prompt neutron lifetime in a modern thermal reactor is about 10−4 seconds, thus it is not feasible to control reactor behavior with prompt neutrons alone. Reactor time behavior can be characterized by weighing the prompt and delayed neutron yield fractions to obtain the average neutron lifetime, Λ=1/k, or the mean generation time between the birth of a neutron and the subsequent absorption inducing fission.[5] Reactivity, ρ, is the change in k effective or (k-1)/k.[3]

For one effective delayed group with an average decay constant, C, the point kinetics equation can be simplified to Equation 5 and Equation 6[1][3] with general solutions Equation 7 and 8, respectively.

[Equation 5]

[Equation 6]

General Solutions

P(t) = P1es_1t+P2es_2t [Equation 7]

C(t) = C1es_1t+C2es_2t [Equation 8]

Where

The time constant expressing the more slowly varying asymptotic behavior is referred to as the stable reactor period.[3]

References

  1. "Inhour Equation - Reactor Kinetics". www.nuclear-power.net. Retrieved 2017-12-09.
  2. 1897-1986., Glasstone, Samuel (1967). Nuclear reactor engineering. Sesonske, Alexander, 1921-. Princeton, N.J: Van Nostrand. ISBN 9780442027254. OCLC 1173592.CS1 maint: numeric names: authors list (link)
  3. 1942-, Duderstadt, James J. (16 January 1976). Nuclear reactor analysis. Hamilton, Louis J., 1941-. New York: Wiley. ISBN 9780471223634. OCLC 1529401.CS1 maint: numeric names: authors list (link)
  4. R., Lamarsh, John (2001). Introduction to nuclear engineering. Baratta, Anthony John, 1945- (3rd ed.). Upper Saddle River, N.J.: Prentice Hall. ISBN 9780201824988. OCLC 46708742.
  5. George, Bell (1970). Nuclear Reactor Theory. New York, NY: Litton Educational Publishing, INC. ISBN 978-0442027155.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.