Ikarbus IK-202

Ikarbus IK-202 is an articulated city bus built by the Serbian bus manufacturer Ikarbus from 1996 until 2005.

Ikarbus IK-202
Overview
ManufacturerIkarbus
Production1993−2006
AssemblyZemun, Serbia
Body and chassis
ClassArticulated city bus
RelatedIkarbus IK-201
Ikarbus IK-203
Powertrain
EngineRABA / D10 UTSLL-190 (E2)
TransmissionZF S6-85
Voith D864.3E automatic
Dimensions
Length17.0 m
Width2.5 m
Chronology
PredecessorIkarbus IK-167
SuccessorIkarbus IK-206
Ikarbus IK-218

The model IK-202 was developed from Ikarbus IK-201. In 1996 the production of older IK-161 model has been ceased. IK-202 is similar to IK-201, and IK-203 models. The main difference between those three models is that IK-201 has MAN engine, IK-202 has RABA engine and IK-203 has Mercedes engine. The further development of those models which has replaced them in production is IK-206, with vertical MAN engine which has replaced IK-202 from production.

It has 39 passenger seats made of two pieces of plywood (seat and back) on foundation of steel bars and bars for holding. Doors are four two-wing, pneumatically controlled and opened to the inside. There are seven windows with slide rule and four roof airshafts. The heating system consists from heater on front wall, three heaters in passengers compartment. Roof and sides are isolated.[1]

The IK-202 is today used by GSP Belgrade and other public bus operators in Serbia but in smaller numbers than IK-201. Several IK-202 have been exported to Russia.[2]

Technical data

[3]

  • Maximum speed - 72 km/h
  • Number of passengers - 160
  • Weight of empty vehicle - 14100 kg
  • Battery - 2 x 12V / 180 Ah
  • Tank volume - 300 l
  • Suspension - Air with telescopic shock-absorbers and torsion stabilizer
  • Steering-wheel - PPT (ZF) / 8045

Dimension
  • Length - 17.04 m
  • Width - 2.5 m
  • Height - 3.2 m
  • Height inside - 2.05 m
  • Height of floor from the ground - 0.9 m
  • Height of lowest stair from the ground - 0.345 m
  • Distance between front axles - 5.25 m
  • Distance between rear axles - 6.1 m
  • Front end to the front wheels - 2.82 m
  • Rear end to the rear wheels - 2.9 m

Maneuvering capabilities
  • Smallest diameter of the most protruded wheel - 17.5 m
  • Smallest diameter of turning - 22.5 m

Engines

Installed horizontally between axles

  • RABA / D10 UTSLL-190 (E2) - 190 kW (1900 rpm)

Transmission

See also

References
  1. IK-202 EQUIPMENT
  2. IK-202 in Russia
  3. IK 202 technical data
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.