Honda CBX550F

The Honda CBX550F is a four-stroke, in line four cylinder, sport tourer motorcycle produced from 1982 to 1986 by the Honda Motor Company.[3] The CBX550F II is identical apart from the addition of a half-fairing.[2]

Honda CBX550F
ManufacturerHonda Motor Company
Also calledCBX550 Four
Production1982–1986
ClassSport touring
Engine572.5 cc (34.94 cu in) Four stroke in-line four
Bore / stroke59.2 mm × 52.0 mm (2.33 in × 2.05 in)
Compression ratio9.5:1
Ignition typeTransistorised
Transmission6-speed manual, chain final drive
Frame typeDuplex cradle; tubular steel
SuspensionTelescopic with air assistance front: cantilever with air assistance, rear[1]
BrakesFront: Twin hydraulic disc
Rear: single hydraulic disc
Tyres3.60H18-4PR, front: 4.10H18-4PR, rear
Wheelbase1.380 m (4 ft 6.3 in)
DimensionsL: 2.085 m (6 ft 10.1 in)
W: 0.740 m (2 ft 5.1 in)
H: 1.080 m (3 ft 6.5 in) (F)
1.270 m (4 ft 2.0 in) (F II)
Seat height0.785 m (2 ft 6.9 in)
Weight184 kg (406 lb) (F)
190 kg (420 lb) (F II)[2] (dry)
Fuel capacity17.0 l (3.7 imp gal; 4.5 US gal)
Oil capacity3.0 l (0.66 imp gal; 0.79 US gal)
RelatedHonda CBX1000
Honda CBX750
Honda CBX650
Honda CBX400F
Honda CBX250

Although the model was designated 550, the actual capacity was 572.5 cc (34.94 cu in).[3] Honda developed a completely new, unusual design of engine to compete in the middleweight-sector with twin overhead camshafts acting on rockers, having screw-adjusters for clearance which actuated the sixteen valves (four per cylinder).

The engine featured a standard oil-cooler and a distinctive, unusual exhaust system, a first for Honda, with cross-over pipes directly in front of the engine linking cylinders one to four and a separate pair of pipes connecting cylinders two and three. The CV carburettors were of a new type using mixture-enriching internal fuel passages for cold-starts, with careful engineering of the inlet tracts to achieve smooth gasflow.[4]

The machine was noted for its use of inboard ventilated disc brakes, the discs themselves being contained within a "drum" type enclosure.[2] Front suspension was by oil-damped telescopic fork with air assistance and incorporating an anti-dive mechanism in the left fork leg.[2] Rear suspension was by Honda's own "Pro-Link" rising rate system, which allows the suspension forces to vary in accordance with rear wheel movement.[2] The machine was equipped with transistorised ignition and electrics were 12 volt.

See also

References

Footnotes
  1. Shoemark, Pete (1989). Honda CBX550 572.5cc 1982 to 1986: Owners Workshop Manual. Haynes. p. 90. ISBN 0856969400.
  2. Shoemark, Pete (1989). Honda CBX550 572.5cc 1982 to 1986: Owners Workshop Manual. Haynes. p. 6. ISBN 0856969400.
  3. Shoemark, Pete (1989). Honda CBX550 572.5cc 1982 to 1986: Owners Workshop Manual. Haynes. ISBN 0856969400.
  4. Motor Cycle News (UK weekly newspaper) 5 May 1982, p.21 Honda CBX550.This gem sets new standards, Terry Snelling. Accessed and added 2015-11-02
Sources

Where not already otherwise noted, specifications obtained from, Shoemark, Pete (1989). Honda CBX550 572.5cc 1982 to 1986: Owners Workshop Manual. Haynes. ISBN 0856969400.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.