Gum arabic

Gum arabic is used in the food industry as a stabilizer, emulsifier, and thickening agent in icing, fillings, soft candy, chewing gum, and other confectionery,[8] and to bind the sweeteners and flavorings in soft drinks.[9] A solution of sugar and gum arabic in water, gomme syrup, is sometimes used in cocktails to prevent the sugar from crystallizing and provide a smooth texture.

Gum arabic is a soluble dietary fibre, a complex polysaccharide, primarily indigestible to both humans and animals. It is considered nontoxic and safe for human consumption. An indication of harmless flatulence occurs in some people taking large doses of 30 g or more per day.[1] It is not degraded in the intestine, but fermented in the colon under the influence of microorganisms; it is a prebiotic (as distinct from a probiotic). No regulatory or scientific consensus has been reached about its caloric value; an upper limit of 2 kcal/g was set for rats, but this is not valid for humans. The US FDA initially set a value of 4 kcal/g for food labelling, but in Europe no value was assigned for soluble dietary fibre. A 1998 review concluded that "based on present scientific knowledge, only an arbitrary value can be used for regulatory purposes".[10] In 2008, the USFDA sent a letter of no objection in response to an application to reduce the rated caloric value of gum arabic to 1.7 kcal/g.[11]

Powdered gum arabic for artists, one part gum arabic is dissolved in four parts distilled water to make a liquid suitable for adding to pigments.

A selection of gouaches, some containing gum arabic

Gum arabic is used as a binder for watercolor painting because it dissolves easily in water. Pigment of any color is suspended within the acacia gum in varying amounts, resulting in watercolor paint. Water acts as a vehicle or a diluent to thin the watercolor paint and helps to transfer the paint to a surface such as paper. When all moisture evaporates, the acacia gum typically does not bind the pigment to the paper surface, but is totally absorbed by deeper layers.[12]

If little water is used, after evaporation, the acacia gum functions as a true binder in a paint film, increasing luminosity and helping prevent the colors from lightening. Gum arabic allows more subtle control over washes, because it facilitates the dispersion of the pigment particles. In addition, acacia gum slows evaporation of water, giving slightly longer working time.

The addition of a little gum arabic to watercolor pigment and water allows for easier lifting of pigment from paper, thus can be a useful tool when lifting out color when painting in watercolor.[12]

Gum arabic has a long history as additives to ceramic glazes. It acts as a binder, helping the glaze adhere to the clay before it is fired, thereby minimising damage by handling during the manufacture of the piece. As a secondary effect, it also acts as a deflocculant, increasing the fluidity of the glaze mixture, but also making it more likely to sediment out into a hard cake if not used for a while.

The gum is normally made up into a solution in hot water (typically 10–25 g/l), and then added to the glaze solution after any ball milling in concentrations from 0.02% to 3.0% of gum arabic to the dry weight of the glaze.[13] On firing, the gum burns out at a low temperature, leaving no residues in the glaze. More recently, particularly in commercial manufacturing, gum arabic is often replaced by more refined and consistent alternatives, such as carboxymethyl cellulose.

The historical photography process of gum bichromate photography uses gum arabic mixed with ammonium or potassium dichromate and pigment to create a coloured photographic emulsion that becomes relatively insoluble in water upon exposure to ultraviolet light. In the final print, the acacia gum permanently binds the pigments onto the paper.

Gum arabic is also used to protect and etch an image in lithographic processes, both from traditional stones and aluminum plates. In lithography, gum by itself may be used to etch very light tones, such as those made with a number-five crayon. Phosphoric, nitric, or tannic acid is added in varying concentrations to the acacia gum to etch the darker tones up to dark blacks. The etching process creates a gum adsorb layer within the matrix that attracts water, ensuring that the oil-based ink does not stick to those areas. Gum is also essential to what is sometimes called paper lithography, printing from an image created by a laser printer or photocopier.

Gum arabic is also used as a water-soluble binder in fireworks composition.

Gum arabic is use as binding agent in the making of fuel charcoal. Charcoal made from the taifa plant is powdery, hence to form cakes of charcoal, gum arabic is mixed with the powder and allowed to dry. Fuel charcoal made from taifa plant and gum arabic is burnt in the kitchen to cook food in Senegal and a few other African countries. [14]

In 1445, Prince Henry the Navigator set up a trading post on Arguin Island (off the coast of modern Mauritania), which acquired acacia gum and slaves for Portugal. With the merger of the Portuguese and Spanish crowns in 1580, the Spaniards became the dominant influence along the coast. In 1638, however, they were replaced by the Dutch, who were the first to begin exploiting the acacia gum trade. Produced by the acacia trees of Trarza and Brakna, this acacia gum was considered superior to that previously obtained in Arabia. By 1678, the French had driven out the Dutch and established a permanent settlement at Saint Louis at the mouth of the Senegal River.[16] Gum Arabic came to play an essential role in textile printing and therefore in pre-industrial economies of France, Great-Britain and other European countries. Throughout the 18th century, their competition over the commodity was so fierce, that some have spoken of gum wars.[3]

West African tribes meet to trade gum arabic at Bakel on the Senegal River, 1890 (illustration from "Côte occidentale d'Afrique du Colonel Frey", pl. en reg. p. 100)

For much of the 18th and 19th centuries, gum arabic was the major export from French and British trading colonies in modern Senegal and Mauritania. West Africa had become the sole supplier of world acacia gum by the 18th century, and its export at the French colony of Saint-Louis doubled in the decade of 1830 alone. Taxes, and a threat to bypass Saint-Louis by sending gum to the British traders at Portendick, eventually brought the Emirate of Trarza into direct conflict with the French. In the 1820s, the French launched the Franco-Trarzan War of 1825. The new emir, Muhammad al Habib, had signed an agreement with the Waalo Kingdom, directly to the south of the river. In return for an end to raids in Waalo territory, the Emir took the heiress of Waalo as a bride. The prospect that Trarza might inherit control of both banks of the Senegal struck at the security of French traders, and the French responded by sending a large expeditionary force that crushed Muhammad's army. The war incited the French to expand to the north of the Senegal River for the first time, heralding French direct involvement in the interior of West Africa.[17] Africa continued to export gum arabic in large quantities—from the Sahel areas of French West Africa (modern Senegal, Mauritania, Mali, Burkina Faso, and Niger) and French Equatorial Africa (modern Chad) until these nations gained their independence in 1959–61.

Hundreds of thousands of Sudanese are dependent on gum arabic for their livelihoods. After market reforms, Sudan's exports of gum arabic are now (2019) at about 160.000 tonnes. The production of gum arabic is heavily controlled by the Sudanese government.[18]