Gibson ES-150

Magazine advertising.

The ES-150 was developed and released in association with two US retailers, Montgomery Ward and Spiegel. It was preceded by Gibson adding ancillary piezo pickups to its regular acoustic guitars. The company had developed an electromagnetic pickup in 1935 (the now-famous "bar pickup", named for its shape), which was initially factory-installed only on lap steel guitar (EH) models, then offered as an accessory and finally installed on acoustic guitars (the L-00 and L-1 models).[1]

These electrified guitars were so successful that in the summer of 1936, two retailers, Montgomery Ward and Spiegel May Stern, suggested that Gibson build what became the ES model. Montgomery Ward was the first to offer them for sale, as the 1270 model. It had Gibson's bar pickup (though with rounded bobbins, as opposed to the hexagonal pickup Gibson later installed on its own factory models), and a volume control (no tone control); like Spiegel's 34-S model (first advertised in 1937) it lacked any Gibson identification. Spiegel received 42 of these instruments between January and August 1937 before it cut them from the catalog. The contract with Montgomery Ward ran until 1940, and Gibson made an estimated 900 instruments with the 1270 designation.[1]

Gibson's "own" ES-150, a "more-upmarket ES model" compared to the Ward and Spiegel models, had minor changes from the contract models, such as a solid carved spruce top, maple back and sides, and an adjustable truss rod. They shipped the first guitar to Bailey's House of Music on November 20, 1936.[1] The instrument sold for $155 including cord, six-tube amplifier, and case. The pickup placement, closer to the instrument's neck than on Gibson's EH steel guitars and on guitars made by other manufacturers, produced a warmer, less "trebly" tone that was favorably received by jazz and blues players. In 1937, the model's peak year, Gibson shipped an average of forty guitars a month. In early 1937, Gibson began shipping two four-string versions: a tenor guitar (the EST-150, with a 23" scale, renamed the ETG-150 in 1940) and a plectrum version (the EPG-150, with a 27" scale).[2] Early players included Eddie Durham, Floyd Smith and, the most famous of them, Charlie Christian, who bought an ES-150 in 1936. His joining the Benny Goodman Sextet in August 1939 gave the ES-150 "a near-mythical status" (aided by a feature in that year's December issue of Down Beat).[2]

Gibson introduced two new variations in August 1938: the cheaper ES-100 (with a smaller body and different pickup), and an upscale version, the ES-250 (with a different peghead, fancier inlays, and a pickup with individual pole pieces instead of a bar). Each with case and amplifier, the ES-100 sold for $117.50 and the ES-250 started at $253.[3]

By 1940, sales had slumped, and Gibson enhanced the model, changing to pickups with Alnico magnets—the forerunner of the P-90, which is still in production. They installed the new pickups on all their electric models, starting in July 1940, renaming the ES-100 and 250 to ES-125 and 300). On the ES-150, Gibson moved the pickup (with adjustable individual poles) closer to the bridge for a more "biting" sound for soloing. Gibson still installed bar-style pickups on request on post-1940 models for Hank Garland, Barry Galbraith, and Barney Kessel. Gibson formally reintroduced the bar pickup in 1958 as a $60 option—announcing it with the question, "Remember the straight-bar pickup that was made famous by Charlie Christian?"[2]

In the late 1960s, Gibson introduced the ES-150DC, which was a significantly different instrument, despite its similar model number. The ES-150DC was a hollowbody electric guitar with a double-cutaway body similar in appearance to the semi-hollow 335 guitars (except for a greater body thickness). It featured two humbuckers, a rosewood fingerboard with small block inlays, and a master volume knob on the lower cutaway. This model, however, was not particularly popular, and it was discontinued by Gibson in the mid-1970s. 1968 Gibson ES-150DW in Walnut Finish

Shipping numbers for the ES-150 in its first full year, 1937, were relatively strong at 464. Thirty-seven EST-150s and one single EPG-150 were shipped in 1937. Of the ES-250, 14 were shipped in 1939. By that year, sales of the ES-150 had dwindled to about 20 units on average per month.[2]

• ES-150: 23 (1936); 464 (1937); 362 (1938); 252 (1939); 218 (1940); total 1,319
• EST-150: 37 (1937); 22 (1938); 15 (1939); 19 (1940); total 93
• EPG-150: 1 (1937)

The Charlie Christian pickup, as the bar-style pickup of the early ES-150 models came to be known, was a departure from previous pickups. Earlier pickups featured either a horseshoe magnet that arched over the strings (as found on the Rickenbacker A-22 "Frying Pan"), or a static coil through which a magnet passed, the magnet being vibrated by the guitar's bridge (a design used by former Gibson employee Lloyd Loar on his Vivi-Tone guitar). The Charlie Christian pickup consists of a coil of copper wire wound around a black plastic bobbin. The coil has a rectangular hole in its center, and the coil and bobbin fit around a chrome-plated steel blade polepiece. Attached at right angles to the bottom of the polepiece are a pair of five-inch-long (13 cm) steel bar magnets, which remain out of sight inside the instrument. These magnets are secured to the top of the ES-150 by the three bolts visible on the guitar's top.

Gibson made three varieties of the Charlie Christian pickup, all distinguished by the polepiece:

1. The first, produced from 1936 until mid-1938, had a plain blade polepiece. The coil was wound to about 2.4 kΩ resistance using AWG 38 enameled wire.
2. The second type, introduced on ES-150s from mid-1938 onward, had a polepiece with a notch cut out below the second (B) string. This modification lowered the B string's volume, which previously sounded louder than the other strings. This pickup's coil was wound with more turns of a finer wire (AWG 42), producing approximately 5.2 kΩ resistance and higher output.
3. The third pickup was available on the Gibson ES-250, beginning in 1939. The blade on this pickup had five notches, one in each string space. This pickup had a more compact internal design, with a cobalt steel slug that was small enough to sit directly under the pickup.

Bibliography

• Duchossoir, A.R.; Wheelwright, Lynn (March 2012). "The Original ES-150: How Gibson Won the ES-War, Part 1". Vintage Guitar.
• Duchossoir, A.R.; Wheelwright, Lynn (May 2012). "The Original ES-150: How Gibson Won the ES-War, Part 2". Vintage Guitar.

Wikimedia Commons has media related to Gibson ES-150.