Gel ball shooter

The general design of gel blasters are very similar to airsoft guns, usually comprising a coil spring-loaded piston air pump, with a T-piece ahead of the pump outlet to feed gel beads. The spring-piston pump is either manually cocked (like a spring-piston gun) or more commonly driven by an electric motor-gearbox assembly powered by batteries (like airsoft automatic electric guns (AEG)). However, unlike the plastic airsoft pellets or the gelatin paintball capsules, the gel beads are very frangible and will simply fragment if any high pressure is introduced, so the propelling pump is small with a very low pressure output. As a result, gel blasters have a much lower muzzle energy, and hence shorter effective range and worse accuracy than most paintball guns, although recently muzzle-mounted frictional "hop-up" devices have been introduced to impart backspin on the gel beads and try increasing the range and precision. This nature of the beads' external and terminal ballistics make them much safer to play with (although protective eyewear is still recommended[1][2]) and very unlikely to cause any property damage. The gel beads are also very cheap, easily transported in packets and only require soaking in water for a few hours prior to playing. Another feature is the ease of cleaning, since the water beads will break up on impact and dehydrate into biodegradable slush powder fragments.

Originally, gel blasters used paintball-style top-mounted hoppers (often disguised as fake optical sights) that relied on gravity to load the gel beads when shooting, because the water beads were typically too fragile to withstand even the pressure exerted by a follower spring. However, in late 2016, bottom-mounted magazines with inbuilt motors were introduced, which draw power from the main batteries (via contact points at the top) to drive a cogwheel that gently pushed the beads up a feeding tube. This gave a lot more realism than previously and triggered a huge surge in the popularity and market of gel blasters. The recent proliferation of more hardy gel beads on the market has also introduced magazines using the traditional spring follower.

Grenades

Gel grenades are essentially a bottle with an internal spring mechansm. When the safety clip is pulled and the lever is relaxed, a sear mechanism is released and allows three trapdoor-like hatches on the external shell to spread open, followed by the release of three spring-loaded hinged flaps underneath that "flick out" out any gel beads stored within the cavity between the hatches and the flaps, causing a "shower" of gel beads in all directions. The sear can be designed to release in a delayed fashion, or in response to vibrations caused by impacts.

Anti-personnel mine

Gel mines are essentially plastic clamshell containers shaped like the M18 Claymore, with a pair of spring-loaded internal hinged flaps connected end-to-end by a looping piece of canvas. When the mine is loaded, the two flaps are folded down and trapped by the locked-shut clamshell enclosure, and gel beads are stored into the space within the canvas loop via a small feeding window on the front enclosure. The locking mechanism of the clamshell enclosure can be released manually by a tripwire, or by a remote control. When released, the clamshell enclosure opens up, allowing the two spring flaps to flip out like a french door, stretching and flattening the canvas between them, which will launch out all the stored gel beads towards the front direction.

First introduced in China as an airsoft substitute (as airsoft is banned in Mainland) and as a better alternative to foam dart guns, gel blasters have become increasingly popular in regions with airsoft-unfriendly laws such as Malaysia,[4][5][6] Vietnam,[7] and particularly Australia, where they quickly gained a massive enthusiast following in states like Queensland and South Australia.[8] As the gel beads (which are commonly sold in gardening and household hardware stores) are not legally regarded as ammunitions, gel blasters are classified as toys by the ACCC ASN/NZ 8124 in Australia and are legal for sale, but they are a grey area in other states with so-called "appearance law" and are frequently subjected to arbitrary crackdowns by police. Some toy importers/merchants, such as Brad Towner from Armored Heaven in New South Wales and Peter Clarke from Tactical Edge in Queensland, have been subjected to shipment seizures by the Australian Border Force and prosecuted for "firearm offences"[9][10] but had the lawsuits ruled in their favor.[11]

DJI's popular remote controlled toy ground drone, the RoboMaster S1, was almost banned from import into Australia because it had a blaster gun for competitive tag matches, and as of early 2020 is still not available for sale in Victoria and New South Wales "to comply with local laws and regulations".[12]

• Airgun
• Airsoft gun
• Laser Tag
• Nerf
• Paintball gun