g_c (engineering)

In engineering and physics, g_c is a unit conversion factor used to convert mass to force or vice versa.[1] It is defined as

g_{\text{c}}={\frac {ma}{F}}

In unit systems where force is a derived unit, like in SI units, g_c is equal to 1. In unit systems where force is a primary unit, like in English units, g_c is not equal to 1, and is required to obtain correct results.[2]

Motivations

According to Newton's law of motion, the force F is proportional to the product of mass m and acceleration a:

F\propto ma

or

F=Kma

If F = 1 lbf, m = 1 lb, and a = 32.2 ft/s², then

1~{\text{lbf}}=K\cdot 1~{\text{lb}}\cdot 32.2~{\frac {\text{ft}}{{\text{s}}^{2}}}

Leading to

K={\frac {1~{\text{lbf}}}{1~{\text{lb}}\cdot 32.2~{\frac {\text{ft}}{{\text{s}}^{2}}}}}=0.03106~{\frac {{\text{lbf}}\cdot {\text{s}}^{2}}{{\text{lb}}\cdot {\text{ft}}}}

g_c is defined as the reciprocal of the constant K

g_{\text{c}}={\frac {1}{K}}=32.2~{\frac {{\text{lb}}\cdot {\text{ft}}}{{\text{lbf}}\cdot {\text{s}}^{2}}}

or equivalently, as

g_{\text{c}}={\frac {ma}{F}}

Specific systems of units

International System	English System	British Customary System
g_c = 1 (kg·m)/(N·s²)	g_c = 32.2 (lb·ft)/(lbf·s²)	g_c = 1 (slug·ft)/(lbf·s²)

References

Janna, William (2015). Introduction to Fluid Mechanics (5th ed.). CRC Press. p. 5. ISBN 9781482211610.
Cengel, Yunus; Boles, Michael (2014). Thermodynamics: An Engineering Approach (8th ed.). McGraw-Hill Education. p. 6. ISBN 9780073398174.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.

[1] Janna, William (2015). Introduction to Fluid Mechanics (5th ed.). CRC Press. p. 5. ISBN 9781482211610.

[2] Cengel, Yunus; Boles, Michael (2014). Thermodynamics: An Engineering Approach (8th ed.). McGraw-Hill Education. p. 6. ISBN 9780073398174.

gc (engineering)

Motivations

Specific systems of units

References

g_c (engineering)