Fiat C-platform

The Fiat C-platform was an automobile platform used in small family cars of the Fiat Group. The predecessors of the C-platform were the Type Three and Type Two platforms, and the successor is the new Compact platform[1] which debuted in Alfa Romeo Giulietta in 2010.

Fiat C-platform
Overview
ManufacturerFiat Group
ProductionFirst generation: 1995-2010
Type Two rev. 3: 1996-2010
Second generation: 2001–2014
Body and chassis
ClassSmall family car platform
LayoutFront-engine, front-wheel drive, all-wheel drive
VehiclesFirst generation:
Fiat Bravo
Fiat Brava
Fiat Marea
Fiat Multipla
Type Two rev. 3:
Alfa Romeo 156
Lancia Lybra
Alfa Romeo 147
Alfa Romeo GT
Second generation:
Fiat Stilo
Fiat Bravo
Lancia Delta
Chronology
PredecessorType Two platform and Type Three platform
SuccessorFiat Compact platform

First generation (C1)

The first generation C-platform was no more of a lightly developed Type Two platform: it retained almost all of its structure (including the wheelbase in most models) and components, including the suspension layout, albeit with some revisions. It is also called "Type Two rev. 2". As in the Type Two platform, the suspension is independent all-around, composed of MacPherson struts at the front and trailing arms at the rear. The first models to use this platform were the Fiat Bravo and Fiat Brava, followed by the Fiat Marea. The Fiat Multipla is built on the sandwich version of this platform.

Vehicles based on Fiat C1 platform

Type Two rev. 3

The Alfa Romeo 156 and Lancia Lybra used a development of the C1 platform, called "Type Two rev. 3", with an extended wheelbase and a different suspension setup: double wishbones at the front and MacPherson struts at the rear for the Alfa; MacPherson struts at the front and BLG ("Bracci Longitudinali Guidati", translating to "Guided Longitudinal Arms") multilink rear suspension for the Lancia. The Alfa Romeo 147 and Alfa Romeo GT were derived from the 156 floorpan and retained its suspension setup. Estate versions of 156 and Lybra were also available with Boge-Nivomat self-levelling hydropneumatic rear suspension. Alfa 156, with its Sportwagon Q4 and Crosswagon Q4, is the only C-platform based car with all-wheel drive.

Vehicles based on Fiat Type Two rev. 3

Second generation (C2)

The second generation C-platform was jointly designed by global team of Fiat engineers and small number of Lancia engineers in Fiat development center in Mirafiori, also engineers in Betim, Brazil took part of the development. This all-new chassis uses MacPherson strut front suspension and torsion beam rear suspension.

The first model to use this platform was the Fiat Stilo. Between 2007 and 2008 the C-platform was used by the new Fiat Bravo[2] and the new third generation Lancia Delta with longer wheelbase.[3] The C-platform was built in Cassino (Italy) and Betim to be used for the Brazilian versions of Stilo.

The C-platform supports many of Fiat engines from 1.2 FIRE petrol to 1.9 diesel MultiJet TwinTurbo.

Vehicles based on Fiat C2 platform

References

  1. "New Fiat C-Segment platform". Green.autoblog.com. 2010-02-15. Retrieved 2010-12-31.
  2. "Specification about Fiat Bravo". Quellichebravo.it. Archived from the original on 2010-11-25. Retrieved 2010-12-31.
  3. "New Lancia Delta: specification". Omniauto.it. Retrieved 2010-12-31.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.