Engine power

Engine power
Common symbols	P
SI unit	Kilowatt (kW)
In SI base units	1000 kg⋅m2⋅s−3
Derivations from; other quantities	P = M·ω
Dimension

Engine power is the power that an engine can put out. It can be expressed in power units, most commonly kilowatt, pferdestärke, or horsepower. In terms of internal combustion engines, the engine power usually describes the rated power, which is a power output that the engine can maintain over a long period of time according to a certain testing method, for example ISO 1585. In general though, an internal combustion engine has a power take-off shaft (the crankshaft), therefore, the rule for shaft power applies to internal combustion engines: Engine power is the product of the engine torque and the crankshaft's angular velocity.

Definition

Power is the product of torque and angular velocity:[1]

Let:

$P=$ Power in Watt (W)
$M=$ Torque in Newton-metre (N·m)
$n=$ Crankshaft speed per Second (s⁻¹)
$\omega =$ Angular velocity = $2\pi n$

Power is then:

P=M\cdot \omega

In internal combustion engines, the crankshaft speed $n$ is a more common figure than $\omega$ , so we ca use $2\pi n$ instead, which is equivalent to $\omega$ :[2]

P=M\cdot 2\pi \cdot n

Note that $n$ is per Second (s⁻¹). If we want to use the common per Minute (min⁻¹) instead, we have to divide $n$ by 60:

P=M\cdot 2\pi \cdot {n \over 60}

Usage

Numerical value equations

The approximate numerical value equations for engine power from torque and crankshaft speed are:[1][3][4]

International unit system (SI)

Let:

$P=$ Power in Kilowatt (kW)
$M=$ Torque in Newton-metre (N·m)
$n=$ Crankshaft speed per Minute (min⁻¹)

Then:

P={M\cdot n \over 9550}

Technical unit system (MKS)

$P=$ Power in Pferdestärke (PS)
$M=$ Torque in Kilopondmetre (kp·m)
$n=$ Crankshaft speed per Minute (min⁻¹)

Then:

P={M\cdot n \over 716}

Imperial unit system

$P=$ Power in Horsepower (hp)
$M=$ Torque in Pound-force foot (lbf·ft)
$n=$ Crankshaft speed in Revolutions per Minute (rpm)

Then:

P={M\cdot n \over 5252}

Example

Torque and power diagram of the example diesel engine

The power curve (orange) can be derived from the torque curve (blue)
by multiplying with the crankshaft speed and dividing by 9550

A diesel engine produces a torque $M$ of 234 N·m at $n$ 4200 min⁻¹, which is the engine's rated speed.

Let:

$M=234\,N\cdot m$
$n=4200\,{min}^{-1}=70\,s^{-1}$

Then:

234\,N\cdot m\cdot 2\pi \cdot 70\,s^{-1}=102,919\,N\cdot m\cdot s^{-1}\approx 103\,kW

or using the numerical value equation:

{234\cdot 4200 \over 9550}=102.91\approx 103

The engine's rated power output is 103 kW.

Units

	Kilowatt	Kilopondmetre per Second	Pferdestärke	Horsepower	Pound-force foot per minute
1 kW (= 1000 kg·m²·s⁻³) =	1	101.97	1.36	1.34	44.118
1 kp·m·s⁻¹ =	0.00980665	1	0.013	0.0132	433.981
1 PS =	735.49875	75	1	0.986	32,548.56
1 hp =	745.7	76.04	1.014	1	33,000
1 lbf·ft·min⁻¹ =	2.26·10⁻⁵	0.0023	2.99·10⁻⁵	3.03·10⁻⁵	1

Bibliography

Böge, Wolfgang (2017), Alfred Böge (ed.), Handbuch Maschinenbau (in German), Wiesbaden: Springer, ISBN 978-3-658-12528-8

Böge, Alfred (1972), Mechanik und Festigkeitslehre (in German), Wiesbaden: Vieweg, ISBN 9783528140106

Kemp, Albert W. (1998), Industrial Mechanics, American Technical Publishers, ISBN 9780826936905

Fred Schäfer, Richard van Basshuysen, ed. (2017), Handbuch Verbrennungsmotor (in German), Wiesbaden: Springer, ISBN 978-3-658-10901-1

References

Böge 2017. p 233
Fred Schäfer, Richard van Basshuysen 2017. p. 21
Böge 1972. p 154
Kemp 1998. p 259

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.

[Böge_233-1] Böge 2017. p 233

[2] Fred Schäfer, Richard van Basshuysen 2017. p. 21

[Böge_154-3] Böge 1972. p 154

[Kemp_259-4] Kemp 1998. p 259