Cyanotype

Cyanotype is a photographic printing process that produces a cyan-blue print. Engineers used the process well into the 20th century as a simple and low-cost process to produce copies of drawings, referred to as blueprints. The process uses two chemicals: ferric ammonium citrate and potassium ferricyanide.

Architectural drawing blueprint, Canada, 1936

History

The English scientist and astronomer Sir John Herschel discovered the procedure in 1842.[1] Though the process was developed by Herschel, he considered it as mainly a means of reproducing notes and diagrams, as in blueprints.[2]

Anna Atkins created a series of cyanotype limited-edition books that documented ferns and other plant life from her extensive seaweed collection,[3] placing specimens directly onto coated paper and allowing the action of light to create a silhouette effect. By using this photogram process, Anna Atkins is sometimes considered the first female photographer.[4]

Cyanotype photography was popular in Victorian England, but became less popular as photography improved.[5] Another proponent of the craft was Washington Teasdale from Leeds.[6]

Numerous contemporary artists employ the cyanotype process in their art: Christian Marclay, Marco Breuer, Kate Cordsen and John Dugdale.

Process

Cyanotype postcard, Racine, Wis., c. 1910

In a typical procedure, equal volumes of an 8.1% (w/v) solution of potassium ferricyanide and a 20% solution of ferric ammonium citrate are mixed. The overall contrast of the sensitizer solution can be increased with the addition of approximately 6 drops of 1% (w/v) solution potassium dichromate for every 2 ml of sensitizer solution.

This mildly photosensitive solution is then applied to a receptive surface (such as paper or cloth) and allowed to dry in a dark place. Cyanotypes can be printed on any surface capable of soaking up the iron solution. Although watercolor paper is a preferred medium, cotton, wool and even gelatin sizing on nonporous surfaces have been used. Care should be taken to avoid alkaline-buffered papers, which degrade the image over time.

Prints can be made from large format negatives and lithography film, digital negative or everyday objects can be used to make photograms.

A positive image can be produced by exposing it to a source of ultraviolet light (such as sunlight) as a contact print through the negative (traditionally, semitransparent paper) or objects. The combination of UV light and the citrate reduces the iron(III) to iron(II). This is followed by a complex reaction of the iron(II) complex with ferricyanide. The result is an insoluble, blue dye (ferric ferrocyanide) known as Prussian blue.[7] The extent of color change depends on the amount of UV light, but acceptable results are usually obtained after 10–20 minute exposures on a dark, gloomy day.

After exposure, developing of the picture involves the yellow unreacted iron solution being rinsed off with running water. Although the blue color darkens upon drying, the effect can be accelerated by soaking the print in a 6% (v/v) solution of 3% (household) hydrogen peroxide. The water-soluble iron(III) salts are washed away, while the non-water-soluble Prussian blue remains in the paper. This is what gives the picture its typical blue color.[7] The highlight values should appear overexposed, as the water wash reduces the final print values.

Toning

In a cyanotype, a blue is usually the desired color; however, there are a variety of effects that can be achieved. These fall into three categories: reducing, intensifying, and toning.[8]

  • Bleaching is the process of decreasing the intensity of the blue. Sodium carbonate, ammonia, Clorox, TSP, borax, Dektol and other chemicals can be used to do this. A good easily obtained reducer is bleach, though it destroys the paper base. How much and how long to bleach depends on the image content, emulsion thickness and what kind of toning is being used.[9] When using a bleaching agent it is important to pull the cyanotype out of the weak solution and put the cyanotype into a water bath to arrest the bleaching process and prevent the loss of detail in the highlights.[9]
  • Intensifying is the strengthening of the blue effect. These chemicals can also be used to expedite the oxidation process the cyanotype undergoes. These chemicals are hydrogen peroxide, citric acid, lemon juice, and vinegar.[8]
  • Toning is the process used to change the color of the iron in the print cyanotype.[8] The color change varies with the reagent used. There are a variety of elements that can be used, including tannic acid, oolong tea, wine, cat urine, and pyrogallic acid.[8]

Long-term preservation

In contrast to most historical and present-day processes, cyanotype prints do not react well to basic environments.[10] As a result, it is not advised to store or present the print in chemically buffered museum board, as this makes the image fade. Another unusual characteristic of the cyanotype is its regenerative behavior: prints that have faded due to prolonged exposure to light can often be significantly restored to their original tone by simply temporarily storing them in a dark environment.

Cyanotypes on cloth are permanent but must be washed by hand with non-phosphate soap[11] so as to not turn the cyan to yellow.

Largest cyanotype

The largest cyanotype is 276.64 m2 (2977.72 ft2), created by Stefanos Tsakiris (Greece) in Thessaloniki, Greece, on 18 September 2017.[12] Prior to that, the largest cyanotype was created on 26 May 2016 in Lyon, France at the IUT Lyon 1 La Doua. It was 186.56 square metres (2,008.1 sq ft) (58.30 metres (191.3 ft) by 3.20 metres (10.5 ft)).

Artistic use

See also

References

Notes
  1. "Exploring Photography – Photographic Processes – Cyanotype". V&A. 2012-11-13. Retrieved 2012-12-22.
  2. "The Cyanotype". Vernacular Photography. 2012-12-12. Archived from the original on 2013-03-30. Retrieved 2012-12-22.
  3. "Anna Atkins, British, 1799–1871". Leegallery.com. Archived from the original on 2010-08-29. Retrieved 2012-12-22.
  4. "Exploring Photography – Photographers – Anna Atkins". V&A. 2012-11-13. Archived from the original on December 11, 2003. Retrieved 2012-12-22.
  5. "Victorian Life - 43 Cyanotypes". Vintage Everyday. Retrieved 18 August 2019.
  6. "Washington Teasdale". History of Science Museum, Oxford. Retrieved 18 August 2019.
  7. "General View of Niagara Falls from Bridge". World Digital Library. Retrieved 11 February 2013.
  8. Berkowitz, Steven. "Hybrid Photography - Cyanotype Toners" (PDF).
  9. "Cyanotype toning: the basics". mpaulphotography. 2011-04-01. Retrieved 2015-09-14.
  10. Hannavy, John (2013-12-16). Encyclopedia of Nineteenth-Century Photography. Routledge. ISBN 9781135873271.
  11. "Washing instructions for cloth". blueprintsonfabric.com.
Further reading
  • Atkins, Anna (1985). Sun Gardens: Victorian Photograms. With text by Larry J. Schaaf. New York: Aperture. ISBN 0-89381-203-X.
  • Blacklow, Laura (2000). New Dimensions in Photo Processes: a step by step manual (3rd ed.). Boston: Focal Press. ISBN 0-240-80431-7.
  • Ware, M. (1999). Cyanotype: the history, science and art of photographic printing in Prussian blue. Science Museum, UK. ISBN 1-900747-07-3.
  • Crawford, William (1979). The Keepers of Light. New York: Morgan and Morgan. ISBN 0-87100-158-6.
  • Loos, Ted (February 5, 2016). "Cyanotype: Photography's Blue Period is Making a Comeback". New York Times. Worcester, MA.
  • Tsakiris, Stephanos (September 18, 2017). "Guiness world record Largest cyanotype". Thessaloniki.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.