Valmet 361 D

Valmet 361D
Type Agricultural
Manufacturer Valmet
Production 1960-1965
Length 3,000 mm (9 ft 10 in)
Height 1,750 mm (5 ft 9 in)
Weight 1,770 kg (3,902 lb)
Propulsion Valmet 310D (1960-1962)
Valmet 310A (1962-1965)
Wheels

Valmet 361 D was the third diesel tractor built by Valmet.

At the end of 1960, the 361 D was released, replacing the 359 D. It featured a new body, with a more broad and squarer style than before, although it did carry over many of the mechanical components from its predecessor. The engine was a revised 310D (a 2,685 cc (163.8 cu in) diesel engine), utilizing Bosch-designed fuel injection and electrics and producing 46 hp (34 kW) (DIN SAE) and 157 N⋅m (116 lbf⋅ft) of torque. It had a top speed of 28 km/h (17 mph), and could lift up to 1,200 kg (2,646 lb)

Variants Mk1 and Mk2

In 1962, a differential lock, an hour meter and a padded seat were all added. During the same year, a second model (MK2) was released, featuring a more advanced hydraulic system. This allowed position control, based on the top link draft control, as well as mixing control. The Mk2 also saw some cost-cutting measures, such as the Bosch fuel injection being replaced by a lower performance Simms unit, as well as Lucas electrics replacing the Bosch. The 310D engine was replaced by a cheaper 310A unit. The most prominent exterior differences between the MK1 and MK2 are a spraying device, and a lifting device connected to the hand lever.

Replacement

In 1965, a replacement was introduced in the form of the Valmet 565. The major differences between the 565 and 361 are a smaller rear wheel diameter (24 in (610 mm) vs 32 in (813 mm)), and revised front grille and seat.

Valmet 361 Images

See also

Sources

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.