trajpar

trajpar is a system parameter in Creo Elements/Pro that varies from 0 to 1 across the length of a given path. It is used to create complex geometric and non-geometric shapes that vary in dimension along the length of any given path.

Naming

trajpar derives from the words: trajectory parameter. It is a pseudo-variable as it is controlled not by any mathematical representation, but by the physical representation of a path, i.e. a trajectory.

Syntax

sd3=evalgraph('graph1',trajpar*100) Where sd3= A variable inside the variable section sweep that will be driven by a graph feature called 'graph1'

Uses and notability

trajpar can be used with various mathematical functions to create alternating, flaring, bowing or sinusoidal protrusions. It is primarily used in conjunction with the variable section sweep command in Creo Elements/Pro but can also remove material if desired.

trajpar typifies what makes Creo Elements/Pro different from many other CAD software systems. The level of complexity and control given to the user is much greater than, for example other design or engineering software like SolidWorks or Alias

Samples

To create an undulating wave, a sinusoid might be desired:

d1=sin(trajpar\cdot 8\pi )

A flare:

d1=1+trajpar^{2}

etc., where d1 is the dimension to be controlled.

External links

McDougall, John of EMS Technologies (Spring 2006). "Creating a Constant Cross-Section Twist". Profiles Magazine. Retrieved 2006-06-27.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.