Octahedron

Regular octahedron

(Click here for rotating model)
TypePlatonic solid
ElementsF = 8, E = 12
V = 6 (χ = 2)
Faces by sides8{3}
Conway notationO
aT
Schläfli symbols{3,4}
r{3,3} or
Face configurationV4.4.4
Wythoff symbol4 | 2 3
Coxeter diagram
SymmetryOh, BC3, [4,3], (*432)
Rotation groupO, [4,3]+, (432)
ReferencesU05, C17, W2
Propertiesregular, convexdeltahedron
Dihedral angle109.47122° = arccos(−1/3)

3.3.3.3
(Vertex figure)
Cube
(dual polyhedron)

Net

In geometry, an octahedron (plural: octahedra) is a polyhedron with eight faces, twelve edges, and six vertices. The term is most commonly used to refer to the regular octahedron, a Platonic solid composed of eight equilateral triangles, four of which meet at each vertex.

A regular octahedron is the dual polyhedron of a cube. It is a rectified tetrahedron. It is a square bipyramid in any of three orthogonal orientations. It is also a triangular antiprism in any of four orientations.

An octahedron is the three-dimensional case of the more general concept of a cross polytope.

A regular octahedron is a 3-ball in the Manhattan (ℓ1) metric.

Regular octahedron

Dimensions

If the edge length of a regular octahedron is a, the radius of a circumscribed sphere (one that touches the octahedron at all vertices) is

and the radius of an inscribed sphere (tangent to each of the octahedron's faces) is

while the midradius, which touches the middle of each edge, is

Orthogonal projections

The octahedron has four special orthogonal projections, centered, on an edge, vertex, face, and normal to a face. The second and third correspond to the B2 and A2 Coxeter planes.

Orthogonal projections
Centered by Edge Face
Normal		 Vertex Face
Image
Projective
symmetry		 [2] [2] [4] [6]

Spherical tiling

The octahedron can also be represented as a spherical tiling, and projected onto the plane via a stereographic projection. This projection is conformal, preserving angles but not areas or lengths. Straight lines on the sphere are projected as circular arcs on the plane.

Orthographic projection Stereographic projection

Cartesian coordinates

An octahedron with edge length √2 can be placed with its center at the origin and its vertices on the coordinate axes; the Cartesian coordinates of the vertices are then

( ±1, 0, 0 );
( 0, ±1, 0 );
( 0, 0, ±1 ).

In an x–y–z Cartesian coordinate system, the octahedron with center coordinates (a, b, c) and radius r is the set of all points (x, y, z) such that

Area and volume

The surface area A and the volume V of a regular octahedron of edge length a are:

Thus the volume is four times that of a regular tetrahedron with the same edge length, while the surface area is twice (because we have 8 rather than 4 triangles).

If an octahedron has been stretched so that it obeys the equation

the formulas for the surface area and volume expand to become

Additionally the inertia tensor of the stretched octahedron is

These reduce to the equations for the regular octahedron when

Geometric relations

The octahedron represents the central intersection of two tetrahedra

The interior of the compound of two dual tetrahedra is an octahedron, and this compound, called the stella octangula, is its first and only stellation. Correspondingly, a regular octahedron is the result of cutting off from a regular tetrahedron, four regular tetrahedra of half the linear size (i.e. rectifying the tetrahedron). The vertices of the octahedron lie at the midpoints of the edges of the tetrahedron, and in this sense it relates to the tetrahedron in the same way that the cuboctahedron and icosidodecahedron relate to the other Platonic solids. One can also divide the edges of an octahedron in the ratio of the golden mean to define the vertices of an icosahedron. This is done by first placing vectors along the octahedron's edges such that each face is bounded by a cycle, then similarly partitioning each edge into the golden mean along the direction of its vector. There are five octahedra that define any given icosahedron in this fashion, and together they define a regular compound.

Octahedra and tetrahedra can be alternated to form a vertex, edge, and face-uniform tessellation of space, called the octet truss by Buckminster Fuller. This is the only such tiling save the regular tessellation of cubes, and is one of the 28 convex uniform honeycombs. Another is a tessellation of octahedra and cuboctahedra.

The octahedron is unique among the Platonic solids in having an even number of faces meeting at each vertex. Consequently, it is the only member of that group to possess mirror planes that do not pass through any of the faces.

Using the standard nomenclature for Johnson solids, an octahedron would be called a square bipyramid. Truncation of two opposite vertices results in a square bifrustum.

The octahedron is 4-connected, meaning that it takes the removal of four vertices to disconnect the remaining vertices. It is one of only four 4-connected simplicial well-covered polyhedra, meaning that all of the maximal independent sets of its vertices have the same size. The other three polyhedra with this property are the pentagonal dipyramid, the snub disphenoid, and an irregular polyhedron with 12 vertices and 20 triangular faces.[1]

Uniform colorings and symmetry

There are 3 uniform colorings of the octahedron, named by the triangular face colors going around each vertex: 1212, 1112, 1111.

The octahedron's symmetry group is Oh, of order 48, the three dimensional hyperoctahedral group. This group's subgroups include D3d (order 12), the symmetry group of a triangular antiprism; D4h (order 16), the symmetry group of a square bipyramid; and Td (order 24), the symmetry group of a rectified tetrahedron. These symmetries can be emphasized by different colorings of the faces.

Name Octahedron Rectified tetrahedron
(Tetratetrahedron)		 Triangular antiprism Square bipyramid Rhombic fusil
Image
(Face coloring)
(1111)
(1212)
(1112)
(1111)
(1111)
Coxeter diagram =
Schläfli symbol {3,4} r{3,3} s{2,6}
sr{2,3}		 ft{2,4}
{ } + {4}		 ftr{2,2}
{ } + { } + { }
Wythoff symbol 4 | 3 2 2 | 4 3 2 | 6 2
| 2 3 2
Symmetry Oh, [4,3], (*432) Td, [3,3], (*332) D3d, [2+,6], (2*3)
D3, [2,3]+, (322)		 D4h, [2,4], (*422) D2h, [2,2], (*222)
Order 48 24 12
6		 16 8

Nets

It has eleven arrangements of nets.

Dual

The octahedron is the dual polyhedron to the cube.

Faceting

The uniform tetrahemihexahedron is a tetrahedral symmetry faceting of the regular octahedron, sharing edge and vertex arrangement. It has four of the triangular faces, and 3 central squares.


Octahedron
Tetrahemihexahedron

Irregular octahedra

The following polyhedra are combinatorially equivalent to the regular polyhedron. They all have six vertices, eight triangular faces, and twelve edges that correspond one-for-one with the features of a regular octahedron.

  • Triangular antiprisms: Two faces are equilateral, lie on parallel planes, and have a common axis of symmetry. The other six triangles are isosceles.
  • Tetragonal bipyramids, in which at least one of the equatorial quadrilaterals lies on a plane. The regular octahedron is a special case in which all three quadrilaterals are planar squares.
  • Schönhardt polyhedron, a non-convex polyhedron that cannot be partitioned into tetrahedra without introducing new vertices.
  • Bricard octahedron, a non-convex self-crossing flexible polyhedron

Other convex octahedra

More generally, an octahedron can be any polyhedron with eight faces. The regular octahedron has 6 vertices and 12 edges, the minimum for an octahedron; irregular octahedra may have as many as 12 vertices and 18 edges.[2] There are 257 topologically distinct convex octahedra, excluding mirror images. More specifically there are 2, 11, 42, 74, 76, 38, 14 for octahedra with 6 to 12 vertices respectively.[3][4] (Two polyhedra are "topologically distinct" if they have intrinsically different arrangements of faces and vertices, such that it is impossible to distort one into the other simply by changing the lengths of edges or the angles between edges or faces.)

Some better known irregular octahedra include the following:

  • Hexagonal prism: Two faces are parallel regular hexagons; six squares link corresponding pairs of hexagon edges.
  • Heptagonal pyramid: One face is a heptagon (usually regular), and the remaining seven faces are triangles (usually isosceles). It is not possible for all triangular faces to be equilateral.
  • Truncated tetrahedron: The four faces from the tetrahedron are truncated to become regular hexagons, and there are four more equilateral triangle faces where each tetrahedron vertex was truncated.
  • Tetragonal trapezohedron: The eight faces are congruent kites.

Octahedra in the physical world

Octahedra in nature

Fluorite octahedron.

Octahedra in art and culture

Two identically formed rubik's snakes can approximate an octahedron.
  • Especially in roleplaying games, this solid is known as a "d8", one of the more common polyhedral dice.
  • In the film Tron (1982), the character Bit took this shape as the "Yes" state.
  • If each edge of an octahedron is replaced by a one-ohm resistor, the resistance between opposite vertices is 1/2 ohm, and that between adjacent vertices 5/12 ohm.[5]
  • Six musical notes can be arranged on the vertices of an octahedron in such a way that each edge represents a consonant dyad and each face represents a consonant triad; see hexany.

Tetrahedral Truss

A framework of repeating tetrahedrons and octahedrons was invented by Buckminster Fuller in the 1950s, known as a space frame, commonly regarded as the strongest structure for resisting cantilever stresses.

A regular octahedron can be augmented into a tetrahedron by adding 4 tetrahedra on alternated faces. Adding tetrahedra to all 8 faces creates the stellated octahedron.

tetrahedron stellated octahedron

The octahedron is one of a family of uniform polyhedra related to the cube.

It is also one of the simplest examples of a hypersimplex, a polytope formed by certain intersections of a hypercube with a hyperplane.

The octahedron is topologically related as a part of sequence of regular polyhedra with Schläfli symbols {3,n}, continuing into the hyperbolic plane.

Tetratetrahedron

The regular octahedron can also be considered a rectified tetrahedron – and can be called a tetratetrahedron. This can be shown by a 2-color face model. With this coloring, the octahedron has tetrahedral symmetry.

Compare this truncation sequence between a tetrahedron and its dual:

The above shapes may also be realized as slices orthogonal to the long diagonal of a tesseract. If this diagonal is oriented vertically with a height of 1, then the first five slices above occur at heights r, 3/8, 1/2, 5/8, and s, where r is any number in the range 0 < r ≤ 1/4, and s is any number in the range 3/4 ≤ s < 1.

The octahedron as a tetratetrahedron exists in a sequence of symmetries of quasiregular polyhedra and tilings with vertex configurations (3.n)2, progressing from tilings of the sphere to the Euclidean plane and into the hyperbolic plane. With orbifold notation symmetry of *n32 all of these tilings are Wythoff constructions within a fundamental domain of symmetry, with generator points at the right angle corner of the domain.[6][7]

Trigonal antiprism

As a trigonal antiprism, the octahedron is related to the hexagonal dihedral symmetry family.

Square bipyramid

Family of bipyramids
Polyhedron
Coxeter
Tiling
Config. V2.4.4 V3.4.4 V4.4.4 V5.4.4 V6.4.4 V7.4.4 V8.4.4 V9.4.4 V10.4.4

See also

References

  1. ↑ Finbow, Arthur S.; Hartnell, Bert L.; Nowakowski, Richard J.; Plummer, Michael D. (2010). "On well-covered triangulations. III". Discrete Applied Mathematics. 158 (8): 894–912. doi:10.1016/j.dam.2009.08.002. MR 2602814.
  2. ↑
  3. ↑ Counting polyhedra
  4. ↑ "Archived copy". Archived from the original on 17 November 2014. Retrieved 14 August 2016.
  5. ↑ Klein, Douglas J. (2002). "Resistance-Distance Sum Rules" (PDF). Croatica Chemica Acta. 75 (2): 633–649. Retrieved 2006-09-30.
  6. ↑ Coxeter Regular Polytopes, Third edition, (1973), Dover edition, ISBN 0-486-61480-8 (Chapter V: The Kaleidoscope, Section: 5.7 Wythoff's construction)
  7. ↑ Two Dimensional symmetry Mutations by Daniel Huson
  • Wikisource "Octahedron". Encyclopædia Britannica. 19 (11th ed.). 1911.
  • Weisstein, Eric W. "Octahedron". MathWorld.
  • Klitzing, Richard. "3D convex uniform polyhedra x3o4o - oct".
  • Editable printable net of an octahedron with interactive 3D view
  • Paper model of the octahedron
  • K.J.M. MacLean, A Geometric Analysis of the Five Platonic Solids and Other Semi-Regular Polyhedra
  • The Uniform Polyhedra
  • Virtual Reality Polyhedra The Encyclopedia of Polyhedra
Fundamental convex regular and uniform polytopes in dimensions 2–10
Family An Bn I2(p) / Dn E6 / E7 / E8 / F4 / G2 Hn
Regular polygon Triangle Square p-gon Hexagon Pentagon
Uniform polyhedron Tetrahedron Octahedron • Cube Demicube Dodecahedron • Icosahedron
Uniform 4-polytope 5-cell 16-cell • Tesseract Demitesseract 24-cell 120-cell • 600-cell
Uniform 5-polytope 5-simplex 5-orthoplex • 5-cube 5-demicube
Uniform 6-polytope 6-simplex 6-orthoplex • 6-cube 6-demicube 122 • 221
Uniform 7-polytope 7-simplex 7-orthoplex • 7-cube 7-demicube 132 • 231 • 321
Uniform 8-polytope 8-simplex 8-orthoplex • 8-cube 8-demicube 142 • 241 • 421
Uniform 9-polytope 9-simplex 9-orthoplex • 9-cube 9-demicube
Uniform 10-polytope 10-simplex 10-orthoplex • 10-cube 10-demicube
Uniform n-polytope n-simplex n-orthoplex • n-cube n-demicube 1k2 • 2k1 • k21 n-pentagonal polytope
Topics: Polytope families • Regular polytope • List of regular polytopes and compounds

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.